Memory mappings were only truncated on an explicit truncate, but not when the
file size was changed externally.

Fix this by moving the truncation code from fuse_setattr to
fuse_change_attributes.

Yes, there are races between write and and external truncation, but we can't
really do anything about them.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make lifetime of 'struct fuse_file' independent from 'struct file' by adding a
reference counter and destructor.

This will enable asynchronous page writeback, where it cannot be guaranteed,
that the file is not released while a request with this file handle is being
served.

The actual RELEASE request is only sent when there are no more references to
the fuse_file.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use wake_up_all instead of wake_up in put_reserved_req(), otherwise it is
possible that the right task is not woken up.

Also create a separate reserved_req_waitq in addition to the blocked_waitq,
since they fulfill totally separate functions.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set the read and write congestion state if the request queue is close to
blocking, and clear it when it's not.

This prevents unnecessary blocking in readahead and (when writable mmaps are
allowed) writeback.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The floppy drive is slow.  These days I see absolutely no good reason why the
floppy driver should try to gain a tiny bit of speed by telling gcc to
optimize access to some variables via the register keyword.  Better to just
leave gcc free to do whatever optimizations it deduces to be sane and not
hamper it by telling it that some variables in the floppy driver are special
and need to be fast (they don't).
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A good initial step for a cleanup seems to me to be getting rid of old dead
code.  This stuff is either commented out or inside '#if 0' so it is not
currently in use at all, let's just get rid of it once and for all.  That's a
few lines less to deal with.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Yes, some of this will likely be replaced in later patches, but I do not see
anyone else coming out of the woodwork with any patches for this driver, so
I'll ignore comments about churn.  I want to get this driver cleaned up, and
if I'm going to do so I want to start with this basic style cleanup to reduce
the reading pain a bit.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change migration_call(CPU_DEAD) to use direct spin_lock_irq() instead of
task_rq_lock(rq->idle), rq->idle can't change its task_rq().

This makes the code a bit more symmetrical with migrate_dead_tasks()'s path
which uses spin_lock_irq/spin_unlock_irq.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Cliff Wickman <cpw@sgi.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently move_task_off_dead_cpu() is called under
write_lock_irq(tasklist).  This means it can't use task_lock() which is
needed to improve migrating to take task's ->cpuset into account.

Change the code to call move_task_off_dead_cpu() with irqs enabled, and
change migrate_live_tasks() to use read_lock(tasklist).

This all is a preparation for the futher changes proposed by Cliff Wickman, see
	http://marc.info/?t=117327786100003Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Cliff Wickman <cpw@sgi.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whenever a read error is found, we should attempt to overwrite with correct
data to 'fix' it.

However when do a 'check' pass (which compares data blocks that are
successfully read, but doesn't normally overwrite) we don't do that.  We
should.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'degraded' attribute is useful to quickly determine if the array is
degraded, instead of parsing 'mdadm -D' output or relying on the other
techniques (number of working devices against number of defined devices,
etc.).  The md code already keeps track of this attribute, so it's useful to
export it.
Signed-off-by: NIustin Pop <iusty@k1024.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When an array is started read-only, MD_RECOVERY_NEEDED can be set but no
recovery will be running.  This causes 'sync_action' to report the wrong
value.

We could remove the test for MD_RECOVERY_NEEDED, but doing so would leave a
small gap after requesting a sync action, where 'sync_action' would still
report the old value.

So make sure that for a read-only array, 'sync_action' always returns 'idle'.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

http://bugzilla.kernel.org/show_bug.cgi?id=3277

There is a seq_printf here that isn't being passed a 'seq'.  Howeve as the
code is inside #ifdef MD_DEBUG, nobody noticed.

Also remove some extra spaces.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bitmap_active() no longer exists and BITMAP_ACTIVE is no longer used.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In current release kernels the md module (Software RAID) uses a static
array (dev_t[128]) to store partition/device info temporarily for
autostart.

I discovered this (and that the devices are added as disks/partitions are
discovered at boot) while I was debugging why only one of my MD arrays would
come up whole, while all the others were short a disk.

I eventually discovered that it was enumerating through all of 9 of my 11 hds
(2 had only 4 partitions apiece) while the other 9 have 15 partitions (I
wanted 64 per drive...).  The last partition of the 8th drive in my 9 drive
raid 5 sets wasn't added, thus making the final md array short both a parity
and data disk, and it was started later, elsewhere.

This patch replaces that static array with a list.

[akpm@linux-foundation.org: removed unused var]
Signed-off-by: NMichael J. Evans <mjevans1983@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Val's cross-port of the ext3 reservations code into ext2.

[mbligh@mbligh.org: Small type error for printk
[akpm@linux-foundation.org: fix types, sync with ext3]
[mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3]
[akpm@linux-foundation.org: kill noisy printk]
[akpm@linux-foundation.org: remember to dirty the gdp's block]
[akpm@linux-foundation.org: cross-port the missed 5dea5176]
[akpm@linux-foundation.org: cross-port e6022603]
[akpm@linux-foundation.org: Port the omitted 08fb306f]
[akpm@linux-foundation.org: Backport the missed 20acaa18]
[akpm@linux-foundation.org: fixes]
[cmm@us.ibm.com: fix reservation extension]
[bunk@stusta.de: make ext2_get_blocks() static]
[hugh@veritas.com: fix hang]
[hugh@veritas.com: ext2_new_blocks should reset the reservation window size]
[hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end]
[hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such]
[hugh@veritas.com: rbtree usage cleanup]
[pbadari@us.ibm.com: Fix for ext2 reservation]
[bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()]
[hugh@veritas.com: ext2 balloc: use io_error label]
Cc: "Martin J. Bligh" <mbligh@mbligh.org>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't want to introduce pointless delays in throttle_vm_writeout() when
the writeback limits are not yet exceeded, do we?

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Greg KH <greg@kroah.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I_LOCK was used for several unrelated purposes, which caused deadlock
situations in certain filesystems as a side effect.  One of the purposes
now uses the new I_SYNC bit.

Also document the various bits and change their order from historical to
logical.

[bunk@stusta.de: make fs/inode.c:wake_up_inode() static]
Signed-off-by: NJoern Engel <joern@wohnheim.fh-wedel.de>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After making dirty a 100M file, the normal behavior is to start the writeback
for all data after 30s delays.  But sometimes the following happens instead:

	- after 30s:    ~4M
	- after 5s:     ~4M
	- after 5s:     all remaining 92M

Some analyze shows that the internal io dispatch queues goes like this:

		s_io            s_more_io
		-------------------------
	1)	100M,1K         0
	2)	1K              96M
	3)	0               96M

1) initial state with a 100M file and a 1K file
2) 4M written, nr_to_write <= 0, so write more
3) 1K written, nr_to_write > 0, no more writes(BUG)

nr_to_write > 0 in (3) fools the upper layer to think that data have all been
written out.  The big dirty file is actually still sitting in s_more_io.  We
cannot simply splice s_more_io back to s_io as soon as s_io becomes empty, and
let the loop in generic_sync_sb_inodes() continue: this may starve newly
expired inodes in s_dirty.  It is also not an option to draw inodes from both
s_more_io and s_dirty, an let the loop go on: this might lead to live locks,
and might also starve other superblocks in sync time(well kupdate may still
starve some superblocks, that's another bug).

We have to return when a full scan of s_io completes.  So nr_to_write > 0 does
not necessarily mean that "all data are written".  This patch introduces a
flag writeback_control.more_io to indicate this situation.  With it the big
dirty file no longer has to wait for the next kupdate invocation 5s later.

Cc: David Chinner <dgc@sgi.com>
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Miklos Szeredi <miklos@szeredi.hu> and me identified a writeback bug:

> The following strange behavior can be observed:
>
> 1. large file is written
> 2. after 30 seconds, nr_dirty goes down by 1024
> 3. then for some time (< 30 sec) nothing happens (disk idle)
> 4. then nr_dirty again goes down by 1024
> 5. repeat from 3. until whole file is written
>
> So basically a 4Mbyte chunk of the file is written every 30 seconds.
> I'm quite sure this is not the intended behavior.

It can be produced by the following test scheme:

# cat bin/test-writeback.sh
grep nr_dirty /proc/vmstat
echo 1 > /proc/sys/fs/inode_debug
dd if=/dev/zero of=/var/x bs=1K count=204800&
while true; do grep nr_dirty /proc/vmstat; sleep 1; done

# bin/test-writeback.sh
nr_dirty 19207
nr_dirty 19207
nr_dirty 30924
204800+0 records in
204800+0 records out
209715200 bytes (210 MB) copied, 1.58363 seconds, 132 MB/s
nr_dirty 47150
nr_dirty 47141
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47205
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47215
nr_dirty 47216
nr_dirty 47216
nr_dirty 47216
nr_dirty 47154
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47134
nr_dirty 47134
nr_dirty 47135
nr_dirty 47135
nr_dirty 47135
nr_dirty 46097 <== -1038
nr_dirty 46098
nr_dirty 46098
nr_dirty 46098
[...]
nr_dirty 46091
nr_dirty 46092
nr_dirty 46092
nr_dirty 45069 <== -1023
nr_dirty 45056
nr_dirty 45056
nr_dirty 45056
[...]
nr_dirty 37822
nr_dirty 36799 <== -1023
[...]
nr_dirty 36781
nr_dirty 35758 <== -1023
[...]
nr_dirty 34708
nr_dirty 33672 <== -1024
[...]
nr_dirty 33692
nr_dirty 32669 <== -1023

% ls -li /var/x
847824 -rw-r--r-- 1 root root 200M 2007-08-12 04:12 /var/x

% dmesg|grep 847824  # generated by a debug printk
[  529.263184] redirtied inode 847824 line 548
[  564.250872] redirtied inode 847824 line 548
[  594.272797] redirtied inode 847824 line 548
[  629.231330] redirtied inode 847824 line 548
[  659.224674] redirtied inode 847824 line 548
[  689.219890] redirtied inode 847824 line 548
[  724.226655] redirtied inode 847824 line 548
[  759.198568] redirtied inode 847824 line 548

# line 548 in fs/fs-writeback.c:
543                 if (wbc->pages_skipped != pages_skipped) {
544                         /*
545                          * writeback is not making progress due to locked
546                          * buffers.  Skip this inode for now.
547                          */
548                         redirty_tail(inode);
549                 }

More debug efforts show that __block_write_full_page()
never has the chance to call submit_bh() for that big dirty file:
the buffer head is *clean*. So basicly no page io is issued by
__block_write_full_page(), hence pages_skipped goes up.

Also the comment in generic_sync_sb_inodes():

544                         /*
545                          * writeback is not making progress due to locked
546                          * buffers.  Skip this inode for now.
547                          */

and the comment in __block_write_full_page():

1713                 /*
1714                  * The page was marked dirty, but the buffers were
1715                  * clean.  Someone wrote them back by hand with
1716                  * ll_rw_block/submit_bh.  A rare case.
1717                  */

do not quite agree with each other. The page writeback should be skipped for
'locked buffer', but here it is 'clean buffer'!

This patch fixes this bug. Though I'm not sure why __block_write_full_page()
is called only to do nothing and who actually issued the writeback for us.

This is the two possible new behaviors after the patch:

1) pretty nice: wait 30s and write ALL:)
2) not so good:
	- during the dd: ~16M
	- after 30s:      ~4M
	- after 5s:       ~4M
	- after 5s:     ~176M

The next patch will fix case (2).

Cc: David Chinner <dgc@sgi.com>
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NTFS's if-condition on dirty inodes is not complete.  Fix it with
sb_has_dirty_inodes().

Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Streamline the management of dirty inode lists and fix time ordering bugs.

The writeback logic used to move not-yet-expired dirty inodes from s_dirty to
s_io, *only to* move them back.  The move-inodes-back-and-forth thing is a
mess, which is eliminated by this patch.

The new scheme is:
- s_dirty acts as a time ordered io delaying queue;
- s_io/s_more_io together acts as an io dispatching queue.

On kupdate writeback, we pull some inodes from s_dirty to s_io at the start of
every full scan of s_io.  Otherwise  (i.e. for sync/throttle/background
writeback), we always pull from s_dirty on each run (a partial scan).

Note that the line
	list_splice_init(&sb->s_more_io, &sb->s_io);
is moved to queue_io() to leave s_io empty. Otherwise a big dirtied file will
sit in s_io for a long time, preventing new expired inodes to get in.

Cc: Ken Chen <kenchen@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current -mm tree has bucketful of bug fixes in periodic writeback path.
However, we still hit a glitch where dirty pages on a given inode aren't
completely flushed to the disk, and system will accumulate large amount of
dirty pages beyond what dirty_expire_interval is designed for.

The problem is __sync_single_inode() will move an inode to sb->s_dirty list
even when there are more pending dirty pages on that inode.  If there is
another inode with a small number of dirty pages, we hit a case where the loop
iteration in wb_kupdate() terminates prematurely because wbc.nr_to_write > 0.
Thus leaving the inode that has large amount of dirty pages behind and it has
to wait for another dirty_writeback_interval before we flush it again.  We
effectively only write out MAX_WRITEBACK_PAGES every dirty_writeback_interval.
If the rate of dirtying is sufficiently high, the system will start
accumulate a large number of dirty pages.

So fix it by having another sb->s_more_io list on which to park the inode
while we iterate through sb->s_io and to allow each dirty inode which resides
on that sb to have an equal chance of flushing some amount of dirty pages.
Signed-off-by: NKen Chen <kenchen@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This one fixes four bugs.

There are a few situation in there where writeback decides it is going to skip
over a blockdev inode on the kernel-internal blockdev superblock.  It
presently does this by moving the blockdev inode onto the tail of the blockdev
superblock's s_dirty.  But

a) this screws up s_dirty's reverse-time-orderedness and

b) refiling the blockdev for writeback in another 30 second is rude.  We
   should try again sooner than that.

Fix all this up by using redirty_head(): move the blockdev inode onto the head
of the blockdev superblock's s_dirty list for prompt writeback.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recycling the previous changelog:

  When the writeback function is operating in writeback-for-flushing mode
  (as opposed to writeback-for-integrity) and it encounters an I_LOCKed inode,
  it will skip writing that inode.  This is done for throughput and latency:
  move on to another inode rather than blocking for this one.

  Writeback skips this inode by moving it off s_io and onto s_dirty, so that
  writeback can proceed with the other inodes on s_io.

  However that inode movement can corrupt s_dirty's
  reverse-time-orderedness.  Fix that by using the new redirty_tail(), which
  will update the refiled inode's dirtied_when field.

  Note: the behaviour in here is a bit rude: if kupdate happens to come
  across a locked inode then it will defer writeback of that inode for another
  30 seconds.  We'll address that in the next patch.

Address that here.  What we do is to move the skipped inode to the _head_ of
s_dirty, immediately eligible for writeout again.  Instead of deferring that
writeout for another 30 seconds.

One would think that this might cause a livelock: we keep on trying to write
the same locked inode.  But it won't because:

a) if that was the case, it would _already_ be happening on the
   balance_dirty_pages codepath.  Because balance_dirty_pages() doesn't care
   about inode timestamps.

b) if we skipped this inode then we won't have done any writeback.  The
   higher-level writeback paths will see that wbc.nr_to_write didn't change
   and they'll then back off and take a nap.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the writeback function is operating in writeback-for-flushing mode (as
opposed to writeback-for-integrity) and it encounters an I_LOCKed inode, it
will skip writing that inode.  This is done for throughput and latency: move
on to another inode rather than blocking for this one.

Writeback skips this inode by moving it off s_io and onto s_dirty, so that
writeback can proceed with the other inodes on s_io.

However that inode movement can corrupt s_dirty's reverse-time-orderedness.
Fix that by using the new redirty_tail(), which will update the refiled
inode's dirtied_when field.

Note: the behaviour in here is a bit rude: if kupdate happens to come across a
locked inode then it will defer writeback of that inode for another 30
seconds.  We'll address that in the next patch.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a comment in there which claims that the inode is left on s_io
if nfs chickened out of writing some data.

But that's not been true for three years.
9290280ced13c85689adeffa587e9a53bd3a5873 fixed a livelock by moving these
inodes back onto s_dirty.  Fix the comment.

In the second leg of the `if', use redirty_tail() rather than open-coding it.

Add weaselly comment indicating lack of confidence in the code and lack of the
fortitude which would be needed to fiddle with it.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the kupdate function has tried to write back an expired inode it will
then check to see whether some of the inode's pages are still dirty.

This can happen when the filesystem decided to not write a page for some
reason.  But it does _not_ occur due to redirtyings: a redirtying will set
I_DIRTY_PAGES.

What we need to do here is to set I_DIRTY_PAGES to reflect reality and to then
put the inode onto the _head_ of s_dirty for consideration on the next kupdate
pass, in five seconds time.

Problem is, the code failed to modify the inode's timestamp when pushing the
inode onto thehead of s_dirty.

The patch:

If there are no other inodes on s_dirty then we leave the inode's timestamp
alone: it is already expired.

If there _are_ other inodes on s_dirty then we arrange for this inode to get
the same timestamp as the inode which is at the head of s_dirty, thus
preserving the s_dirty ordering.  But we only need to do this if this inode
purports to have been dirtied before the one at head-of-list.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While writeback is working against a dirty inode it does a check after trying
to write some of the inode's pages:

"did the lower layers skip some of the inode's dirty pages because they were
locked (or under writeback, or whatever)"

If this turns out to be true, we must move the inode back onto s_dirty and
redirty it.  The reason for doing this is that fsync() and friends only check
the s_dirty list, and those functions want to know about those pages which
were locked, so they can be waited upon and, if necessary, rewritten.

Problem is, that redirtying was putting the inode onto the tail of s_dirty
without updating its timestamp.  This causes a violation of s_dirty ordering.

Fix this by updating inode->dirtied_when when moving the inode onto s_dirty.

But the code is still a bit buggy?  If the inode was _already_ dirty then we
don't need to move it at all.  Oh well, hopefully it doesn't matter too much,
as that was a redirtying, which was very recent anwyay.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For reasons which escape me, inodes which are dirty against a ram-backed
filesystem are managed in the same way as inodes which are backed by real
devices.

Probably we could optimise things here.  But given that we skip the entire
supeblock as son as we hit the first dirty inode, there's not a lot to be
gained.

And the code does need to handle one particular non-backed superblock: the
kernel's fake internal superblock which holds all the blockdevs.

Still.  At present when the code encounters an inode which is dirty against a
memory-backed filesystem it will skip that inode by refiling it back onto
s_dirty.  But it fails to update the inode's timestamp when doing so which at
least makes the debugging code upset.

Fix.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When writeback has finished writing back an inode it looks to see if that
inode is still dirty.  If it is, that means that a process redirtied the inode
while its writeback was in progress.

What we need to do here is to refile the redirtied inode onto the s_dirty
list.

But we're doing that wrongly: it could be that this inode was redirtied
_before_ the last inode on s_dirty.  We're blindly appending this inode to the
list, after an inode which might be less-recently-dirtied, thus violating the
list's ordering.

So we must either insertion-sort this inode into the correct place, or we must
update this inode's dirtied_when field when appending it to the reverse-sorted
s_dirty list, to preserve the reverse-time-ordering.

This patch does the latter: if this inode was dirtied less recently than the
tail inode then copy the tail inode's timestamp into this inode.

This means that in rare circumstances, some inodes will be writen back later
than they should have been.  But the time slip will be small.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix bug flagged by a variable-used-uninitialized warning.

[akpm@linux-foundation.org: coding-style]
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The email address that I use for man-pages maintenance has changed as of
now.  This patch changes the address in Documentation/HOWTO and
MAINTAINERS.
Signed-off-by: NMichael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update dontdiff, based on .gitignore patches from Pete Zaitcev and Adrian
Bunk.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When mounting a file system with wrong journal params do not try to repair
them, suggest fsck instead.
Signed-off-by: NEdward Shishkin <edward@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove NULL initializers and clean whitespace a bit.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

printk: add the KERN_CONT annotation (which is empty string but via
which checkpatch.pl can notice that the lacking KERN_ level is fine).
This useful for multiple calls of hand-crafted printk output done by
early debug code or similar.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When resizing online, setup_new_group_blocks attempts to reserve a
potentially very large transaction, depending on the current filesystem
geometry.  For some journal sizes, there may not be enough room for this
transaction, and the online resize will fail.

The patch below resizes & restarts the transaction as necessary while
setting up the new group, and should work with even the smallest journal.

Tested with something like:

[root@newbox ~]# dd if=/dev/zero of=fsfile bs=1024 count=32768
[root@newbox ~]# mkfs.ext3 -b 1024 fsfile 16384
[root@newbox ~]# mount -o loop fsfile mnt/
[root@newbox ~]# resize2fs /dev/loop0
resize2fs 1.40.2 (12-Jul-2007)
Filesystem at /dev/loop0 is mounted on /root/mnt; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 1
Performing an on-line resize of /dev/loop0 to 32768 (1k) blocks.
resize2fs: No space left on device While trying to add group #2
[root@newbox ~]# dmesg | tail -n 1
JBD: resize2fs wants too many credits (258 > 256)
[root@newbox ~]#

With the below change, it works.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Acked-by: NAndreas Dilger <adilger@clusterfs.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

load_module() returns zero when mod_sysfs_init() fails, then the module
loading will succeed accidentally.

This patch makes load_module() return error correctly in that case.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One more small change to extend the availability of creation of file
descriptors with FD_CLOEXEC set.  Adding a new command to fcntl() requires
no new system call and the overall impact on code size if minimal.

If this patch gets accepted we will also add this change to the next
revision of the POSIX spec.

To test the patch, use the following little program.  Adjust the value of
F_DUPFD_CLOEXEC appropriately.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

#ifndef F_DUPFD_CLOEXEC
# define F_DUPFD_CLOEXEC 12
#endif

int
main (int argc, char *argv[])
{
  if  (argc > 1)
    {
      if (fcntl (3, F_GETFD) == 0)
	{
	  puts ("descriptor not closed");
	  exit (1);
	}
      if (errno != EBADF)
	{
	  puts ("error not EBADF");
	  exit (1);
	}

      exit (0);
    }
  int fd = fcntl (STDOUT_FILENO, F_DUPFD_CLOEXEC, 0);
  if (fd == -1 && errno == EINVAL)
    {
      puts ("F_DUPFD_CLOEXEC not supported");
      return 0;
    }
  if (fd != 3)
    {
      puts ("program called with descriptors other than 0,1,2");
      return 1;
    }

  execl ("/proc/self/exe", "/proc/self/exe", "1", NULL);
  puts ("execl failed");
  return 1;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>