Use common code for pnfs_pageio_init_{read,write} and use
a common generic pg_test function.

Note that this function always assumes the the layout driver's
pg_test method is implemented.

[Fix BUG]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

* Define API for io-engines to report delta_space_used in IOs
* Encode the osd-layout specific information of the layoutcommit
  XDR buffer.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Add a layout driver method to encode the layout type specific
opaque part of layout commit in-line in the xdr stream.

Currently, the pnfs-objects layout driver uses it to encode metadata hints
to the MDS and the blocks layout driver to commit provisionally allocated
extents to the file.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

An io_state pre-allocates an error information structure for each
possible osd-device that might error during IO. When IO is done if all
was well the io_state is freed. (as today). If the I/O has ended with an
error, the io_state is queued on a per-layout err_list. When eventually
encode_layoutreturn() is called, each error is properly encoded on the
XDR buffer and only then the io_state is removed from err_list and
de-allocated.

It is up to the io_engine to fill in the segment that fault and the type
of osd_error that occurred. By calling objlayout_io_set_result() for
each failing device.

In objio_osd:
* Allocate io-error descriptors space as part of io_state
* Use generic objlayout error reporting at end of io.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Add a layout driver method to encode the layout type specific
opaque part of layout return in-line in the xdr stream.

Currently the pnfs-objects layout driver uses it to encode i/o error
information on LAYOUTRETURN.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[fixup layout header pointer for encode_layoutreturn]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.

Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

NFSv4.1 LAYOUTRETURN implementation

Currently, does not support layout-type payload encoding.
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

With the use of the in-kernel osd library. Implement read/write
of data from/to osd-objects according to information specified
in the objects-layout.

Support for stripping over mirrors with a received stripe_unit.
There are however a few constrains which are not supported:
 1. Stripe Unit must be a multiple of PAGE_SIZE
 2. stripe length (stripe_unit * number_of_stripes) can not be
    bigger then 32bit.

Also support raid-groups and partial-layout. Partial-layout is
when not all the groups are received on the line, addressing
only a partial range of the file.

TODO:
  Only raid0! raid 4/5/6 support will come at later stage

A none supported layout will send IO through the MDS

[Important fallout from the last rebase]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Non-rpc layout driver such as for objects and blocks
implement their own I/O path and error handling logic.
Therefore bypass NFS-based error handling for these layout drivers.

[fix lseg ref-count bugs, and null de-refs]
[Fall out from: non-rpc layout drivers]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[get rid of PNFS_USE_RPC_CODE]
[get rid of __nfs4_write_done_cb]
[revert useless change in nfs4_write_done_cb]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

allocate and deallocate per-inode private pnfs_layout_hdr
in preparation for I/O implementation.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

[gfp_flags]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

When a new layout is received in objio_alloc_lseg all device_ids
referenced are retrieved. The device information is queried for from MDS
and then the osd_device is looked-up from the osd-initiator library. The
devices are cached in a per-mount-point list, for later use. At unmount
all devices are "put" back to the library.

objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware
API for retrieving device information given a device_id.

TODO: The device cache can get big. Cap its size. Keep an LRU and start
      to return devices which were not used, when list gets to big, or
      when new entries allocation fail.

[pnfs-obj: Bugs in new global-device-cache code]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[use global device cache]
[use layout driver in global device cache]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

objlayout_alloc_lseg prepares an xdr_stream and calls the
raid engins objio_alloc_lseg() to allocate a private
pnfs_layout_segment.

objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to
decode and store the layout_segment information in an
objio_segment struct, using the pnfs_osd_xdr.h API for
the actual parsing the layout xdr.

objlayout_free_lseg calls objio_free_lseg() to free the
allocated space.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[removed "extern" from function definitions]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

* Add the fs/nfs/objlayout/pnfs_osd_xdr_cli.c file, which will
  include the XDR encode/decode implementations for the pNFS
  client objlayout driver.

[Wrong type in comments]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

* Define the PNFS_OBJLAYOUT Kconfig option in the nfs
  master Kconfig file.
* Add the objlayout driver to the Kernel's Kbuild system.
* Add the fs/nfs/objlayout/Kbuild file for building the
  objlayoutdriver.ko driver
* Define fs/nfs/objlayout/objio_osd.c, register the driver on module
  initialization and unregister on exit.

[pnfs-obj: remove of CONFIG_PNFS fallout]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[added "unsure" clause]
[depend on NFS_V4_1]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

A pNFS client auto-negotiates a lot of features (minorversion level,
pNFS layout type, etc.).  This is convenient, but makes certain kinds of
failures hard for a user to detect.

For example, if the client falls back on 4.0, or falls back to MDS IO
because the user didn't connect to the right iscsi disks before
mounting, the only symptoms may be reduced performance, which may not be
noticed till long after the actual failure, and may be difficult for a
user to diagnose.

However, such "failures" may also be perfectly normal in some cases, so
we don't want to spam the system logs with them.

One approach would be to put some more information into
/proc/self/mountstats.
Signed-off-by: NJ. Bruce Fields <bfields@fieldses.org>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfs: add commit client stats]
[fixup data types for "ret" variables in pnfs_try_to* inline funcs.]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[fix definition of show_pnfs for !CONFIG_PNFS]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case]
    There is a build error when CONFIG_NFS_V4 is set but
    CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype
    was unbalanced between the two cases.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[pnfs: super.c remove CONFIG_PNFS]
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Use recalled range to invalidate particular layout segments in the layout cache.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Add offset and count parameters to pnfs_update_layout and use them to get
the layout in the pageio path.

Order cache layout segments in the following order:
* offset (ascending)
* length (descending)
* iomode (RW before READ)

Test byte range against the layout segment in use in pnfs_{read,write}_pg_test
so not to coalesce pages not using the same layout segment.

[fix lseg ordering]
[clean up pnfs_find_lseg lseg arg]
[remove unnecessary FIXME]
[fix ordering in pnfs_insert_layout]
[clean up pnfs_insert_layout]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Initialize xdr_stream and xdr_buf using an array of page pointers
and length of buffer.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server.  Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Note: This functionlaity is incomplete as all layout segments referring to
the 'to be removed device id' need to be reaped, and all in flight I/O drained.

[use be32 res in nfs4_callback_devicenotify]
[use nfs_client to qualify deviceid for cb_notify_deviceid]
[use global deviceid cache for CB_NOTIFY_DEVICEID]
[refactor device cache _lookup_deviceid]
[refactor device cache _find_get_deviceid]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[Bug in new global-device-cache code]
[layout_driver MUST set free_deviceid_node if using dev-cache]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.

[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Some definitions in the header file depend on nfs_fs.h so pnfs.h can't
be included independently.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

deviceids are unique per server, per layout type.
Therefore, in the global cache in the files layout driver
deviceids from different servers may clash so we need
to qualify them with a struct nfs_client that represents
the nfs server that returned the deviceid.

Introduced in 2.6.39 commit ea8eecdd
"NFSv4.1 move deviceid cache to filelayout driver"
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

configfs_readdir() will use the existing inode numbers of inodes in the
dcache, but it makes them up for attribute files that aren't currently
instantiated.  There is a race where a closing attribute file can be
tearing down at the same time as configfs_readdir() is trying to get its
inode number.

We want to get the inode number of open attribute files, because they
should match while instantiated.  We can't lock down the transition
where dentry->d_inode is set to NULL, so we just check for NULL there.
We can, however, ensure that an inode we find isn't iput() in
configfs_d_iput() until after we've accessed it.
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

When configfs is faking mkdir() on its subsystem or default group
objects, it starts by adding a negative dentry.  It then tries to
instantiate the group.  If that should fail, it must clean up after
itself.

I was using d_delete() here, but configfs_attach_group() promises to
return an empty dentry on error.  d_delete() explodes with the entry
dentry.  Let's try d_drop() instead.  The unhashing is what we want for
our dentry.
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

As Metze pointed out, commit 84cdf74e broke mapchars option:

    Commit "cifs: fix unaligned accesses in cifsConvertToUCS"
    (84cdf74e) does multiple steps
    in just one commit (moving the function and changing it without
    testing).

    put_unaligned_le16(temp, &target[j]); is never called for any
    codepoint the goes via the 'default' switch statement. As a result
    we put just zero (or maybe uninitialized) bytes into the target
    buffer.

His proposed patch looks correct, but doesn't apply to the current head
of the tree. This patch should also fix it.

Cc: <stable@kernel.org> # .38.x: 581ade4d: cifs: clean up various nits in unicode routines (try #2)
Reported-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The is_path_accessible check uses a QPathInfo call, which isn't
supported by ancient win9x era servers. Fall back to an older
SMBQueryInfo call if it fails with the magic error codes.

Cc: stable@kernel.org
Reported-and-Tested-by: NSandro Bonazzola <sandro.bonazzola@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Steps to reproduce the bug:

  - Call FS_IOC_SETLFAGS ioctl with flags=FS_COMPR_FL
  - Call FS_IOC_SETFLAGS ioctl with flags=0
  - Call FS_IOC_GETFLAGS ioctl, and you'll see FS_COMPR_FL is still set!
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

As we've added per file compression/cow support.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

FS_COW_FL and FS_NOCOW_FL were newly introduced to control per file
COW in btrfs, but FS_NOCOW_FL is sufficient.

The fact is we don't have corresponding BTRFS_INODE_COW flag.

COW is default, and FS_NOCOW_FL can be used to switch off COW for
a single file.

If we mount btrfs with nodatacow, a newly created file will be set with
the FS_NOCOW_FL flag. So to turn on COW for it, we can just clear the
FS_NOCOW_FL flag.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When a btrfs disk is created by mixed data & metadata option, it will have no
pure data or pure metadata space info.

In btrfs's for-linus branch, commit 78b1ea13838039cd88afdd62519b40b344d6c920
(Btrfs: fix OOPS of empty filesystem after balance) initializes space infos at
the very beginning.  The problem is this initialization does not take the mixed
case into account, which will cause btrfs will easily get into ENOSPC in mixed
case.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If posix_acl_from_xattr() returns an error code, a negative address is
dereferenced causing an oops; fix by checking for error code first.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It's a hot function, and we're better off not mixing types in the mask
calculations.  The compiler just ends up mixing 16-bit and 32-bit
operations, for no good reason.

So do everything in 'unsigned int' rather than mixing 'unsigned int'
masking with a 'umode_t' (16-bit) mode variable.

This, together with the parent commit (47a150ed: "Cache user_ns in
struct cred") makes acl_permission_check() much nicer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During resource migration, if the target node were to die, the thread doing
the migration spins until the target node is not removed from the domain map.
This patch slows the spin by making the thread wait for the recovery to kick in.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

Patch skips mount recovery for hard-ro mounts which otherwise leads to an oops.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>

If o2hb finds unexpected values in the heartbeat slot, it prints a message
"ERROR: Device "dm-6": another node is heartbeating in our slot!"

This message could be misleading. This patch adds two more messages to
help users better diagnose the problem.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>