The help text for DIAG288_WATCHDOG in drivers/watchdog/Kconfig
still mentioned the misleading old module name vmwatchdog.
This patch changes that to the correct new name diag288_wdt.
Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add initial Intel MID watchdog driver support.

This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.
Signed-off-by: NEric Ernst <eric.ernst@intel.com>
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

All three iop variants we support in Linux (iop32x, iop33x and
iop13xx) seem to have support for the watchdog hardware, but this
driver fails to build for the first two of these because it
uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for
iop13xx.

This clarifies the dependency in Kconfig to avoid randconfig
build errors. It is unlikely that anyone will ever miss support
for this driver on the ancient iop3xx platforms, so we don't
need to bother trying to fix it properly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org

Since both chips are now supported by the w83627hf watchdog driver,
the chip specific drivers are no longer needed and can be removed.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Convert the imx2_wdt driver to the new watchdog core api.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:

SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
IMX2+            LE                    LE
Vybird           LE                    LE
LS1              LE                    BE
LS2              LE                    LE

Other possible SoCs:
SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
Soc1             BE                    BE
Soc2             BE                    LE

And also the watchdog's registers will be 32-bits for some versions,
and though it is 16-bits in IMX2+, Vybird and LS+.

Using the regmap APIs, could be more easy to support different
endianness and also more easy to support 32-bits version...
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

According to its Kconfig help text, the sbc8360 watchdog driver is
only used on the Axiomtek SBC8360 single-board computer. This piece of
hardware is 32-bit x86 so the driver is useless beyond X86_32.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add the LPAR variant of the diag 288 watchdog to the driver.
The only available action on timeout for LPAR is a PSW restart.
Signed-off-by: NPhilipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Converted the vmwatchdog driver to use the kernel's watchdog API.
Signed-off-by: NPhilipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Anyone using a system based on an AMD Elan SC520 processor would be
building a dedicated kernel for it, so we can make the sc520_wdt
driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it
makes things more consistent. It also makes kernel configuration for
every other x86 user easier.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as
dependency for bcm_kona_wdt.c.
Signed-off-by: NMarkus Mayer <markus.mayer@linaro.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in
mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new
DT-only MACH_DOVE Kconfig.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and
later).  This driver will configure one watchdog timer that will reset the
system in the case of a watchdog timeout.

This driver binds to the nvidia,tegra30-timer device node and gets its
register base from there.
Signed-off-by: NAndrew Chew <achew@nvidia.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Enable this driver for Zynq.
Move it to architecture independent Kconfig part.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

- Remove uneeded headers, fops functions
- Use xilinx_wdt prefix in start/stop/keepalive functions
  and in new structures
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

After adding support for Armada 370/XP SoC let's enable the build on
these platforms.
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Tested-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `dw_wdt_drv_probe':
drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource'
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Major difference is that the watchdog control and counter registers
are different on both chips.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Instead of requiring the user to provide an IO address per module
parameter, auto-detect it as well as supported chips.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add sp805_wdt depends on ARM64.
Signed-off-by: NNaresh Bhat <naresh.bhat@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Convert mpc8xxx_wdt.c to the new watchdog API.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

There is nothing ARM specific in this driver, and we intend to use it on the
Xtensa architecture. Also, clk.h now includes stubs for !CONFIG_HAVE_CLK, so
the driver should build anyway.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add device tree support for exynos5250 and 5420 SoCs and use syscon regmap interface
to configure AUTOMATIC_WDT_RESET_DISABLE and MASK_WDT_RESET_REQUEST registers of PMU
to mask/unmask enable/disable of watchdog in probe and s2r scenarios.
Signed-off-by: NLeela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds a watchdog driver for devices controlled through GPIO,
(Analog Devices ADM706, Maxim MAX823, National NE555 etc).
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The keystone arch uses the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.

The Keystone arch is using clocks in DT and source clock for watchdog
has to be specified, so add this to binding.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

To reduce code duplicate and increase code readability use WDT core
code to handle WDT interface.

Remove io_lock as the WDT core uses mutex to lock each wdt device.
Remove wdt_state as the WDT core tracks state with its own variable.

The watchdog_init_timeout() can read timeout value from timeout-sec
property if the passed value is out of bounds. The heartbeat is
initialized in next way. If heartbeat is not set thought module
parameter, try to read it's value from WDT node timeout-sec property.
If node has no one, use default value.

The heartbeat is hold in wdd->timeout by WDT core, so use it in
order to set timeout period.

Davinci WDT can't be stopped and once it's expired - it can be
rearmed only after hardware reset, that's why nowayout feature
is enforced.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This change introduces debugfs support for the BCM281xx watchdog driver.
Signed-off-by: NMarkus Mayer <markus.mayer@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This commit adds support for the watchdog timer used on the BCM281xx
family of SoCs.
Signed-off-by: NMarkus Mayer <markus.mayer@linaro.org>
Reviewed-by: NMatt Porter <matt.porter@linaro.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

On CSR SiRFprimaII and SiRFatlasVI, the 6th timer can act as a watchdog
timer when the Watchdog mode is enabled.

watchdog occur when TIMER watchdog counter matches the value software
pre-set, when this event occurs, the effect is the same as the system
software reset.
Signed-off-by: NXianglong Du <Xianglong.Du@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Cc: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add a driver for the watchdog timer found on Ralink SoC
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org

This patch adds a watchdog driver for the main hardware watchdog timer
found on MOXA ART SoCs.

The MOXA ART SoC provides one writable timer register, restarting
the hardware once it reaches zero. The register is auto decremented
every APB clock cycle.
Signed-off-by: NJonas Jensen <jonas.jensen@gmail.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Architecture is gone.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds the driver for the watchdog found in the Allwinner A10 and
A13 SoCs. It has DT-support and uses the new watchdog framework.
Signed-off-by: NCarlo Caione <carlo.caione@gmail.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds the driver for the watchdog devices found on MEN Mikro
Elektronik A21 VMEbus CPU Carrier Boards. It has DT-support and uses the
watchdog framework.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@men.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This adds a driver for watchdog timer hardware present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org

Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu
interrupt (usually interrupt #30), and the GIC configuration should flag it as
such. With this setup, request_irq() should fail, and the right API is
request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq().

Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the
right CPU.

There are no users of this driver since a long time and it makes more sense to
get rid of it as nobody is looking to fix it.

In case somebody wakes up after this has been removed and needs it, please
revert this driver and pick these updates (These were never pushed to mainline):

http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add watchdog timer support for the on-board PLD found on some Kontron
embedded modules.

Originally-From: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: NKevin Strasser <kevin.strasser@linux.intel.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>