nsec_t predates ktime_t and has mostly been superseded by it.  In the few
places that are left it's better to make it explicit that we're dealing with
64 bit values here.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that it_real_value is gone, the last user of DEFINE_KTIME and
ktime_to_clock_t are also gone, so remove it before someone starts using it
again.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the it_real_value from /proc/*/stat, during 1.2.x was the last time it
returned useful data (as it was directly maintained by the scheduler), now
it's only a waste of time to calculate it.  Return 0 instead.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the state field and encode this information in the rb_node similiar to
normal timer.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nanosleep is the only user of the expired state, so let it manage this itself,
which makes the hrtimer code a bit simpler.  The remaining time is also only
calculated if requested.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cleanup common_timer_get() a little.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pass current time to hrtimer_forward().  This allows to use the softirq time
in the timer base when the forward function is called from the timer callback.
 Other places pass current time with a call to timer->base->get_time().
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The hrtimer softirq is called from the timer softirq every tick.  Retrieve the
current time from xtime and wall_to_monotonic instead of calling
base->get_time() for each timer base.  Store the time in the base structure
and provide a hook once clock source abstractions are in place and to keep the
code open for new base clocks.

Based on a patch from: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is no valid reason why we can't support "nobh" option for filesystems
with blocksize != PAGESIZE.

This patch lets them use "nobh" option for writeback mode for blocksize <
pagesize.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mingming Cao recently added multi-block allocation support for ext3,
currently used only by DIO.  I added support to map multiple blocks for
mpage_readpages().  This patch add support for ext3_get_block() to deal
with multi-block mapping.  Basically it renames ext3_direct_io_get_blocks()
as ext3_get_block().
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Clean up a few little layout things and comments.

- Add a WARN_ON to a case which I was wondering about.

- Tune up some inlines.

Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that get_block() can handle mapping multiple disk blocks, no need to have
->get_blocks().  This patch removes fs specific ->get_blocks() added for DIO
and makes it users use get_block() instead.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes mpage_readpages() and get_block() to get the disk mapping
information for multiple blocks at the same time.

b_size represents the amount of disk mapping that needs to mapped.  On the
successful get_block() b_size indicates the amount of disk mapping thats
actually mapped.  Only the filesystems who care to use this information and
provide multiple disk blocks at a time can choose to do so.

No changes are needed for the filesystems who wants to ignore this.

[akpm@osdl.org: cleanups]
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pass amount of disk needs to be mapped to get_block().  This way one can
modify the fs ->get_block() functions to map multiple blocks at the same time.

[akpm@osdl.org: performance tweak]
[akpm@osdl.org: remove unneeded assignments]
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Increase the size of the buffer_head b_size field (only) for 64 bit platforms.
Update some old and moldy comments in and around the structure as well.

The b_size increase allows us to perform larger mappings and allocations for
large I/O requests from userspace, which tie in with other changes allowing
the get_block_t() interface to map multiple blocks at once.
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Optimize the block reservation and the multiple block allocation: with the
knowledge of the total number of blocks ahead, set or adjust the reservation
window size properly (based on the number of blocks needed) before block
allocation happens: if there isn't any reservation yet, make sure the
reservation window equals to or greater than the number of blocks needed,
before create an reservation window; if a reservation window is already
exists, try to extends the window size to match the number of blocks to
allocate.  This could increase the possibility of completing multiple blocks
allocation in a single request, as blocks are only allocated in the range of
the inode's reservation window.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update accounting information (quota, boundary checks, free blocks number etc)
in ext3_new_blocks().
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to
allocate the requested number of blocks on a best effort basis: After
allocated the first block, it will always attempt to allocate the next few(up
to the requested size and not beyond the reservation window) adjacent blocks
at the same time.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for multiple block allocation in ext3-get-blocks().

Look up the disk block mapping and count the total number of blocks to
allocate, then pass it to ext3_new_block(), where the real block allocation is
performed.  Once multiple blocks are allocated, prepare the branch with those
just allocated blocks info and finally splice the whole branch into the block
mapping tree.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently ext3_get_block() only maps or allocates one block at a time.  This
is quite inefficient for sequential IO workload.

I have posted a early implements a simply multiple block map and allocation
with current ext3.  The basic idea is allocating the 1st block in the existing
way, and attempting to allocate the next adjacent blocks on a best effort
basis.  More description about the implementation could be found here:
http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2

The following the latest version of the patch: break the original patch into 5
patches, re-worked some logicals, and fixed some bugs.  The break ups are:

 [patch 1] Adding map multiple blocks at a time in ext3_get_blocks()
 [patch 2] Extend ext3_get_blocks() to support multiple block allocation
 [patch 3] Implement multiple block allocation in ext3-try-to-allocate
 (called via ext3_new_block()).
 [patch 4] Proper accounting updates in ext3_new_blocks()
 [patch 5] Adjust reservation window size properly (by the given number
 of blocks to allocate) before block allocation to increase the
 possibility of allocating multiple blocks in a single call.

Tests done so far includes fsx,tiobench and dbench.  The following numbers
collected from Direct IO tests (1G file creation/read) shows the system time
have been greatly reduced (more than 50% on my 8 cpu system) with the patches.

 1G file DIO write:
 	2.6.15		2.6.15+patches
 real    0m31.275s	0m31.161s
 user    0m0.000s	0m0.000s
 sys     0m3.384s	0m0.564s

 1G file DIO read:
 	2.6.15		2.6.15+patches
 real    0m30.733s	0m30.624s
 user    0m0.000s	0m0.004s
 sys     0m0.748s	0m0.380s

Some previous test we did on buffered IO with using multiple blocks allocation
and delayed allocation shows noticeable improvement on throughput and system
time.

This patch:

Add support of mapping multiple blocks in one call.

This is useful for DIO reads and re-writes (where blocks are already
allocated), also is in line with Christoph's proposal of using getblocks() in
mpage_readpage() or mpage_readpages().
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fix was proposed by Trond Myklebust.  He says: The type "sector_t" is
heavily tied in to the block layer interface as an offset/handle to a block,
and is subject to a supposedly block-specific configuration option:
CONFIG_LBD.  Despite this, it is used in struct kstatfs to save a couple of
bytes on the stack whenever we call the filesystems' ->statfs().

So kstatfs's entries related to blocks are invalid on statfs64 for a network
filesystem which has more than 2^32-1 blocks when CONFIG_LBD is disabled.

- struct kstatfs
  Change the type of following entries from sector_t to u64.
  f_blocks
  f_bfree
  f_bavail
  f_files
  f_ffree
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NTakashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add blkcnt_t as the type of inode.i_blocks.  This enables you to make the size
of blkcnt_t either 4 bytes or 8 bytes on 32 bits architecture with CONFIG_LSF.

- CONFIG_LSF
  Add new configuration parameter.
- blkcnt_t
  On h8300, i386, mips, powerpc, s390 and sh that define sector_t,
  blkcnt_t is defined as u64 if CONFIG_LSF is enabled; otherwise it is
  defined as unsigned long.
  On other architectures, it is defined as unsigned long.
- inode.i_blocks
  Change the type from sector_t to blkcnt_t.
Signed-off-by: NTakashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch series fixes the following problems on 32 bits architecture.

o stat64 returns the lower 32 bits of blocks, although userland st_blocks
  has 64 bits, because i_blocks has only 32 bits.  The ioctl with FIOQSIZE has
  the same problem.

o As Dave Kleikamp said, making >2TB file on JFS results in writing an
  invalid block number to disk inode.  The cause is the same as above too.

o In generic quota code dquot_transfer(), the file usage is calculated from
  i_blocks via inode_get_bytes().  If the file is over 2TB, the change of
  usage is less than expected.  The cause is the same as above too.

o As Trond Myklebust said, statfs64's entries related to blocks are invalid
  on statfs64 for a network filesystem which has more than 2^32-1 blocks with
  CONFIG_LBD disabled.  [PATCH 3/3]

We made patches to fix problems that occur when handling a large filesystem
and a large file.  It was discussed on the mails titled "stat64 for over 2TB
file returned invalid st_blocks".
Signed-off-by: NTakashi Sato <sho@tnes.nec.co.jp>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Create a simple wrapper function for the common case of creating a slab-based
mempool.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes a mempool user, which is basically just a wrapper around
kzalloc(), to use the common mempool_kmalloc/kfree, rather than its own
wrapper function, removing duplicated code.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add another allocator to the common mempool code: a kzalloc/kfree allocator

This will be used by the next patch in the series to replace a mempool-backed
kzalloc allocator.  It is also very likely that there will be more users in
the future.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes several mempool users, all of which are basically just
wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather
than their own wrapper function, removing a bunch of duplicated code.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add another allocator to the common mempool code: a kmalloc/kfree allocator

This will be used by the next patch in the series to replace duplicate
mempool-backed kmalloc allocators in several places in the kernel.  It is also
very likely that there will be more users in the future.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert two mempool users that currently use their own mempool-backed page
allocators to use the generic mempool page allocator.

Also included are 2 trivial whitespace fixes.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This will be used by the next patch in the series to replace duplicate
mempool-backed page allocators in 2 places in the kernel.  It is also likely
that there will be more users in the future.
Signed-off-by: NMatthew Dobson <colpatch@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update driver documentation.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove some whitespaces and codingstyle issues.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove per-driver versioning.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use ethtool_op_get_link instead of vortex_get_link.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Handle netif_carrier_{on,of} also if media is forced to 10baseT/100baseTx.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the polling interval for media changes to 5 seconds if link is down and
60 seconds if link is up.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Check for media changes and netif_carrier by using mii_check_media() if mii is
used.
Signed-off-by: NSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I noticed that after boot with an initrd in 2.6.16 the rootfs had:

--w-r-xr-T    1 root     root      6241141 Jan  1  1970 initrd.image

Which is caused by a small typo:
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>