Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

The core page allocator ensures that page flags are zeroed when freeing
pages via free_pages_check.  A number of architectures (ARM, PPC, MIPS)
rely on this property to treat new pages as dirty with respect to the data
cache and perform the appropriate flushing before mapping the pages into
userspace.

This can lead to cache synchronisation problems when using hugepages,
since the allocator keeps its own pool of pages above the usual page
allocator and does not reset the page flags when freeing a page into the
pool.

This patch adds a new architecture hook, arch_clear_hugepage_flags, so
that architectures which rely on the page flags being in a particular
state for fresh allocations can adjust the flags accordingly when a page
is freed into the pool.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory patch for the introduction of NT_SIGINFO elf note.

Make the location of compat_siginfo_t uniform across eight architectures
which have it.  Now it can be pulled in by including asm/compat.h or
linux/compat.h.

Most of the copies are verbatim.  compat_uid[32]_t had to be replaced by
__compat_uid[32]_t.  compat_uptr_t had to be moved up before
compat_siginfo_t in asm/compat.h on a several architectures (tile already
had it moved up).  compat_sigval_t had to be relocated from linux/compat.h
to asm/compat.h.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Historically, the top three bytes of personality have been used for
things such as ADDR_NO_RANDOMIZE, which made sense only for specific
architectures.

We now however have a flag there that is general no matter the
architecture (UNAME26); generally we have to be careful to preserve the
personality flags across exec().

This patch fixes tile architecture not to forcefully overwrite
personality flags during exec().

In addition to that, we fix two other things along the way:

- exec_domain switching is fixed -- set_personality() should always
  be used instead of directly assigning to current->personality.
- as pointed out by Arnd Bergmann, PER_LINUX_32BIT is not used anywhere
  by tile, so let's just drop that in favor of PER_LINUX
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

asm-generic/unistd.h and a number of asm/unistd.h files have been given
reinclusion guards that allow the guard to be overridden if __SYSCALL is
defined.  Unfortunately, these files define __SYSCALL and don't undefine it
when they've finished with it, thus rendering the guard ineffective.

The reason for this override is to allow the file to be #included multiple
times with different settings on __SYSCALL for purposes like generating syscall
tables.

The following guards are problematic:

arch/arm64/include/asm/unistd.h:#if !defined(__ASM_UNISTD_H) || defined(__SYSCALL)
arch/arm64/include/asm/unistd32.h:#if !defined(__ASM_UNISTD32_H) || defined(__SYSCALL)
arch/c6x/include/asm/unistd.h:#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL)
arch/hexagon/include/asm/unistd.h:#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL)
arch/openrisc/include/asm/unistd.h:#if !defined(__ASM_OPENRISC_UNISTD_H) || defined(__SYSCALL)
arch/score/include/asm/unistd.h:#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
arch/tile/include/asm/unistd.h:#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
arch/unicore32/include/asm/unistd.h:#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
include/asm-generic/unistd.h:#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)

On the assumption that the guards' ineffectiveness has passed unnoticed, just
remove these guards entirely.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

Ease the deployment of clkdev by providing a default asm/clkdev.h for
use if the arch does not have an include/asm/clkdev.h.

Due to limitations in Kbuild we manually add clkdev.h to all
architectures that don't have one rather than having the header appear
by default.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Set up empty UAPI Kbuild files to be populated by the header splitter.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Convert #include "..." to #include <path/...> in kernel system headers.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

An ABI numbering change was made in the hypervisor for Tilera's 4.1
MDE release (just shipped).  It's incompatible with the previous 4.0
release ABI numbering, so we track the new numbering going forward.
We plan to avoid modifying ABI numbering for these interfaces again.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

commit (sched: recover SD_WAKE_AFFINE in select_task_rq_fair and code
clean up) removed SD_PREFER_LOCAL, but left a SD_PREFER_LOCAL usage in
arch/tile code. That breaks the arch/tile build.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/502AF3E6.3050709@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NCong Wang <amwang@redhat.com>

Reviewed-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This change adds support for accessing the USB shim from within the
kernel.  Note that this change by itself does not allow the kernel
to act as a host or as a device; it merely exposes the built-in on-chip
hardware to the kernel.

The <arch/usb_host.h> and <arch/usb_host_def.h> headers are empty at
the moment because the kernel does not require any types or definitions
specific to the tilegx USB shim; the generic USB core code is all we need.
The headers are left in as stubs so that we don't need to modify the
hypervisor header (drv_usb_host_intf.h) from upstream.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This change uses the TRIO IOMMU to map the PCI DMA space and physical
memory at different addresses.  We also now use the dma_mapping_ops
to provide support for non-PCI DMA, PCIe DMA (64-bit) and legacy PCI
DMA (32-bit).  We use the kernel's software I/O TLB framework
(i.e. bounce buffers) for the legacy 32-bit PCI device support since
there are a limited number of TLB entries in the IOMMU and it is
non-trivial to handle indexing, searching, matching, etc.  For 32-bit
devices the performance impact of bounce buffers should not be a concern.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The tilegx PCI root complex support (currently only in linux-next)
is limited to pages that are homed on cached in the default manner,
i.e. "hash-for-home".  This change supports delivery of I/O data to
pages that are cached in other ways (locally on a particular core,
uncached, user-managed incoherent, etc.).

A large part of the change is supporting flushing pages from cache
on particular homes so that we can transition the data that we are
delivering to or from the device appropriately.  The new homecache_finv*
routines handle this.

Some changes to page_table_range_init() were also required to make
the fixmap code work correctly on tilegx; it hadn't been used there
before.

We also remove some stub mark_caches_evicted_*() routines that
were just no-ops anyway.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Nothing includes memprof.h. Nothing uses the macros it defines. It seems
it is just a remnant of the proposed memprof functionality, which got
dropped before the Tilera architecture got added to the tree. This
header can safely be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This change implements PCIe root complex support for tilegx using
the kernel support layer for accessing the TRIO hardware shim.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> [changes in 07487f3]
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Provide kernel support for the tilegx "Transaction I/O" (TRIO) on-chip
hardware.  This hardware implements the PCIe interface for tilegx;
the driver changes to use TRIO for PCIe are in a subsequent commit.

The change is layered on top of the tilegx GXIO IORPC subsystem.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This makes it available to the tilegx network driver.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The TILE-Gx chip includes a packet-processing network engine called
mPIPE ("Multicore Programmable Intelligent Packet Engine").  This
change adds support for using the mPIPE engine from within the
kernel.  The engine has more functionality than is exposed here,
but to keep the kernel code and binary simpler, this is a subset
of the full API designed to enable standard Linux networking only.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The dma_queue support is used by both the mPipe (networking)
and Trio (PCI) hardware shims on tilegx.  This common code is
selected when either of those drivers is built.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Add support for MMIO read/write on tilegx to support GXIO IORPC access.
Similar to the asm-generic version, but we include memory fences on
the writes to be conservative.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The GXIO I/O RPC subsystem handles exporting I/O hardware resources to
Linux and to applications running under Linux.

For instance, memory which is made available for I/O DMA must be mapped
by an I/O TLB; that means that such memory must be locked down by Linux,
so that it is not swapped or otherwise reused, as long as those I/O
TLB entries are active. Similarly, configuring direct hardware access
introduces new validation requirements. If a user application registers
memory, Linux must ensure that the supplied virtual addresses are valid,
and turn them into client physical addresses. Similarly, when Linux then
supplies those client physical addresses to the Tilera hypervisor, it
must in turn validate those before turning them into the real physical
addresses which are required by the hardware.

To the extent that these sorts of activities were required on previous
TILE architecture processors, they were implemented in a device-specific
fashion. This meant that every I/O device had its own Tilera hypervisor
driver, its own Linux driver, and in some cases its own user-level
library support. There was a large amount of more-or-less functionally
identical code in different places, particularly in the different Linux
drivers. For TILE-Gx, this support has been generalized into a common
framework, known as the I/O RPC framework or just IORPC.

The two "gxio" directories (one for headers, one for sources) start
with just a few files in each with this infrastructure commit, but
after adding support for the on-board I/O shims for networking, PCI,
USB, crypto, compression, I2CS, etc., there end up being about 20 files
in each directory.

More information on the IORPC framework is in the <hv/iorpc.h> header,
included in this commit.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

mn10300 has a header (in its include/asm directory) that is a thin
wrapper around asm-generic/ipc.h. This wrapper is useless, since that
header doesn't exist. It is also unused (no file includes asm/ipc.h).

hexagon and tile generate similar headers at build time (using a
generic-y entry in include/asm/Kbuild). These generated headers are
useless and unused too.

Remove this header and these generic-y entries.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: David Howells <dhowells@redhat.com> [MN10300]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The definition of 32-bit values in the 64-bit tilegx architecture is that
they should be sign-extended regardless of whether they are considered
signed or unsigned by the compiler.  Accordingly, we need to use an
"ld4s" rather than "ld4u" to load and sign-extend for get_user().

This fixes glibc bug 14238 (see http://sourceware.org/bugzilla),
introduced during the 3.5 merge window.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This routine isn't used unless CONFIG_HOMECACHE is enabled, which
isn't even available as a public configuration option yet.
Since it no longer links correctly in 3.4, just remove it for now.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

helpers parallel to set_restore_sigmask(), used in the next commits
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This is because __builtin_clz(0) returns 64 for the "undefined" case
of 0, since the builtin just does a right-shift 32 and "clz" instruction.
So, use the alpha approach of casting to u32 and using __builtin_clzll().

Cc: stable@vger.kernel.org
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This just adds a few more attributes to the information Linux
can query from the hypervisor for the /sys/hypervisor/board/ directory,
providing part, serial#, revision#, and description for cpu modules
(as opposed to the board itself, or any mezzanine boards).
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The hardwall drain code was not properly implemented for tilegx,
just tilepro, so you couldn't reliably restart an application that
made use of the udn.

In addition, the code was only applicable to the udn (user dynamic
network).  On tilegx there is a second user network that is available
(the "idn"), and there is support for having I/O shims deliver
user-level interrupts to applications ("ipi") which functions in a
very similar way to the inter-core permissions used for udn/idn.
So this change also generalizes the code from supporting just the udn
to supports udn/idn/ipi on tilegx.

By default we now use /dev/hardwall/{udn,idn,ipi} with separate
minor numbers for the three devices.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This change adds support for a new "super" bit in the PTE, using the new
arch_make_huge_pte() method.  The Tilera hypervisor sees the bit set at a
given level of the page table and gangs together 4, 16, or 64 consecutive
pages from that level of the hierarchy to create a larger TLB entry.

One extra "super" page size can be specified at each of the three levels
of the page table hierarchy on tilegx, using the "hugepagesz" argument
on the boot command line.  A new hypervisor API is added to allow Linux
to tell the hypervisor how many PTEs to gang together at each level of
the page table.

To allow pre-allocating huge pages larger than the buddy allocator can
handle, this change modifies the Tilera bootmem support to put all of
memory on tilegx platforms into bootmem.

As part of this change I eliminate the vestigial CONFIG_HIGHPTE support,
which never worked anyway, and eliminate the hv_page_size() API in favor
of the standard vma_kernel_pagesize() API.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

We already had a syscall that did some dcache flushing, but it was
not used in practice.  Make it MIPS compatible instead so it can
do both the DCACHE and ICACHE actions.  We have code that wants to
be able to use the ICACHE flush mode from userspace so this change
enables that.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This change introduces new flags for the hv_install_context()
API that passes a page table pointer to the hypervisor.  Clients
can explicitly request 4K, 16K, or 64K small pages when they
install a new context.  In practice, the page size is fixed at
kernel compile time and the same size is always requested every
time a new page table is installed.

The <hv/hypervisor.h> header changes so that it provides more abstract
macros for managing "page" things like PFNs and page tables.  For
example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old
HV_PAGE_SIZE_SMALL.  The various PFN routines have been eliminated and
only PA- or PTFN-based ones remain (since PTFNs are always expressed
in fixed 2KB "page" size).  The page-table management macros are
renamed with a leading underscore and take page-size arguments with
the presumption that clients will use those macros in some single
place to provide the "real" macros they will use themselves.

I happened to notice the old hv_set_caching() API was totally broken
(it assumed 4KB pages) so I changed it so it would nominally work
correctly with other page sizes.

Tag modules with the page size so you can't load a module built with
a conflicting page size.  (And add a test for SMP while we're at it.)
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Use direct load/store for the get_user/put_user.

Previously, we would call out to a helper routine that would do the
appropriate thing and then return, handling the possible exception
internally.  Now we inline the load or store, along with a "we succeeded"
indication in a register; if the load or store faults, we write a
"we failed" indication into the same register and then return to the
following instruction.  This is more efficient and gives us more compact
code, as well as being more in line with what other architectures do.

The special futex assembly source file for TILE-Gx also disappears in
this change; we just use the same inlining idiom there as well, putting
the appropriate atomic operations directly into futex_atomic_op_inuser()
(and thus into the FUTEX_WAIT function).

The underlying atomic copy_from_user, copy_to_user functions were
renamed using the (cryptic) x86 convention as copy_from_user_ll and
copy_to_user_ll.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The toolchain supports big-endian mode now, so add support for building
the kernel to run big-endian as well.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The change adds some infrastructure for managing tile pmd's more generally,
using pte_pmd() and pmd_pte() methods to translate pmd values to and
from ptes, since on TILEPro a pmd is really just a nested structure
holding a pgd (aka pte).  Several existing pmd methods are moved into
this framework, and a whole raft of additional pmd accessors are defined
that are used by the transparent hugepage framework.

The tile PTE now has a "client2" bit.  The bit is used to indicate a
transparent huge page is in the process of being split into subpages.

This change also fixes a generic bug where the return value of the
generic pmdp_splitting_flush() was incorrect.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>