This patch (as1195) eliminates a potential problem identified by
Oliver Neukum.  When a driver queues an asynchronous Set-Config
request using usb_driver_set_configuration(), the request should be
cancelled if userspace changes the configuration first.  The patch
introduces a linked list of pending async Set-Config requests, and
uses it to invalidate the requests for a particular device whenever
that device's configuration is set.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1193b) enables wakeup during initialization for all PCI
host controllers, and it removes some code (and comments!) that are no
longer needed now that the PCI core automatically initializes wakeup
settings for all new devices.

The idea is that the bus should initialize wakeup, and the bus glue
or controller driver should enable it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1192) rearranges the USB PCI host controller suspend and
resume and resume routines:

	Use pci_wake_from_d3() for enabling and disabling wakeup,
	instead of pci_enable_wake().

	Carry out the actual state change while interrupts are
	disabled.

	Change the order of the preparations to agree with the
	general recommendation for PCI devices, instead of
	messing around with the wakeup settings while the device
	is in D3.

		In .suspend:
			Call the underlying driver to disable IRQ
				generation;
			pci_wake_from_d3(device_may_wakeup());
			pci_disable_device();

		In .suspend_late:
			pci_save_state();
			pci_set_power_state(D3hot);
			(for PPC_PMAC) Disable ASIC clocks

		In .resume_early:
			(for PPC_PMAC) Enable ASIC clocks
			pci_set_power_state(D0);
			pci_restore_state();

		In .resume:
			pci_enable_device();
			pci_set_master();
			pci_wake_from_d3(0);
			Call the underlying driver to reenable IRQ
				generation

	Add the necessary .suspend_late and .resume_early method
	pointers to the PCI host controller drivers.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This extension allows unpoisoning an anchor allowing drivers that
resubmit URBs to reuse an anchor for methods like resume()
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It is enough to protect accesses to reject field of urb
by marking it as atomic_t,also it is the only reason of
existence of usb_reject_lock,so remove the lock to make
code more clean.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1185) makes usbcore take advantage of the bus
notifications sent out by the driver core.  Now we can create all our
device and interface attribute files before the device or interface
uevent is broadcast.

A side effect is that we no longer create the endpoint "pseudo"
devices at the same time as a device or interface is registered -- it
seems like a bad idea to try registering an endpoint before the
registration of its parent is complete.  So the routines for creating
and removing endpoint devices have been split out and renamed, and
they are called explicitly when needed.  A new bitflag is used for
keeping track of whether or not the interface's endpoint devices have
been created, since (just as with the interface attributes) they vary
with the altsetting and hence can be changed at random times.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB: make printk messages more searchable

Make USB printk messages long and straightforward.  One of these
decorated USB error messages cost me non-trivial efforts to locate.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1177) modifies the USB core suspend and resume
routines.  The resume functions now will take a pm_message_t argument,
so they will know what sort of resume is occurring.  The new argument
is also passed to the port suspend/resume and bus suspend/resume
routines (although they don't use it for anything but debugging).

In addition, special pm_message_t values are used for user-initiated,
device-initiated (i.e., remote wakeup), and automatic suspend/resume.
By testing these values, drivers can tell whether or not a particular
suspend was an autosuspend.  Unfortunately, they can't do the same for
resumes -- not until the pm_message_t argument is also passed to the
drivers' resume methods.  That will require a bigger change.

IMO, the whole Power Management framework should have been set up this
way in the first place.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1178) uses the new round_jiffies_up_relative() routine
for setting the autosuspend delayed_work timer.  It's appropriate
since we don't care too much about the exact length of the delay, but
we don't want it to be too short (rounded down).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Impact: cleanup

Found this when I changed args to __module_param_call.  We now have
core_param for exactly this, but Greg assures me "nousb" is used as a
module parameter, so we need the #ifdef MODULE.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1166) changes usb_new_device().  Now new devices will be
announced in the log _prior_ to being registered; this way the "new
device" lines will appear before all the output from driver probing,
which seems much more logical.

Also, the patch adds a call to usb_stop_pm() to the failure pathway,
so that the parent's count of unsuspended children will remain correct
if registration fails.  In order for this to work properly, the code
to increment that count has to be moved forward, before the first
point where a failure can occur.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usbmon can only be built as a module if usbcore is a module too. Trivial
changes to the relevant Kconfig and Makefile (and a few trivial changes
elsewhere) allow usbmon to be built as a module even if usbcore is
builtin.

This is verified to work in all 9 permutations (3 correctly prohibited
by Kconfig, 6 build a suitable result).
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch introduces a new call to be able to do a USB reset from an
atomic contect. This is quite helpful in USB callbacks to handle
errors (when the only thing that can be done is to do a device
reset).

It is done queuing a work struct that will do the actual reset. The
struct is "attached" to an interface so pending requests from an
interface are removed when said interface is unbound from the driver.

The call flow then becomes:

usb_queue_reset_device()
  __usb_queue_reset_device() [workqueue]
    usb_reset_device()

usb_probe_interface()
  usb_cancel_queue_reset()      [error path]

usb_unbind_interface()
  usb_cancel_queue_reset()

usb_driver_release_interface()
  usb_cancel_queue_reset()

Note usb_cancel_queue_reset() needs smarts to try not to unqueue when
it is actually being executed. This happens when we run the reset from
the workqueue: usb_reset_device() is called and on interface unbind
time, usb_cancel_queue_reset() would be called. That would deadlock on
cancel_work_sync(). To avoid that, we set (before running
usb_reset_device()) usb_intf->reset_running and clear it inmediately
after returning.

Patch is against 2.6.28-rc2 and depends on
http://marc.info/?l=linux-usb&m=122581634925308&w=2 (as submitted by
Alan Stern).
Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1160b) adds support routines for asynchronous autosuspend
and autoresume, with accompanying documentation updates.  There
already are several potential users of this interface, and others are
likely to arise as autosuspend support becomes more widespread.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1161) changes the interface to
usb_lock_device_for_reset().  The existing interface is apparently not
very clear, judging from the fact that several of its callers don't
use it correctly.  The new interface always returns 0 for success and
it always requires the caller to unlock the device afterward.

The new routine will not return immediately if it is called while the
driver's probe method is running.  Instead it will wait until the
probe is over and the device has been unlocked.  This shouldn't cause
any problems; I don't know of any cases where drivers call
usb_lock_device_for_reset() during probe.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just over a year ago (!) I had this brief exchange with Alan Stern:

>> It seems that the signal that can be used with USBDEVFS_DISCSIGNAL and 
>> in usbdevfs_urb.signr is limited to the real-time signals SIGRTMIN to 
>> SIGRTMAX. What's the rationale for this restriction? I believe that a 
>> process can kill() itself with any signal number, can't it? I was 
>> planning to use SIGIO for usbdevfs_urb.signr and SIGTERM (uncaught) for 
>> USBDEVFS_DISCSIGNAL. I don't think I'll have a problem with using 
>> SIGRTMIN+n instead, but I'm curious to know if there's some subtle 
>> problem with the non-real-time signals that I should be aware of.
>
> I don't know of any reason for this restriction.

Since no-one else could think of a reason either, I offer the following 
patch which allows any signal to be used with USBDEVFS_DISCSIGNAL and 
usbdevfs_urb.signr.
Signed-off-by: NPhil Endecott <usbpatch@chezphil.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1156) straightens out some code in usbcore.  The
usb_create_intf_ep_files() and usb_remove_intf_ep_files() routines
don't need to be separate inlines; they should be moved bodily into
the places where they get used.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's no need to take the address of the function params or local variables
when the direct value byteswapping routines are available.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This will let us use this header in other header files.
Will be needed for the FHCI USB Host driver.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PM: Simplify the new suspend/hibernation framework for devices

Following the discussion at the Kernel Summit, simplify the new
device PM framework by merging 'struct pm_ops' and
'struct pm_ext_ops' and removing pointers to 'struct pm_ext_ops'
from 'struct platform_driver' and 'struct pci_driver'.

After this change, the suspend/hibernation callbacks will only
reside in 'struct device_driver' as well as at the bus type/
device class/device type level.  Accordingly, PCI and platform
device drivers are now expected to put their suspend/hibernation
callbacks into the 'struct device_driver' embedded in
'struct pci_driver' or 'struct platform_driver', respectively.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

... and don't bother in callers.  Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.

i_mode is not worth the effort; it has no common default value.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When a driver unbinds from an interface, usbcore always sends a
Set-Interface request to reinstall altsetting 0.  Unforunately, quite
a few devices have buggy firmware that crashes when it receives this
request.

To avoid such problems, this patch (as1180) arranges to send the
Set-Interface request only when the interface is not already in
altsetting 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Wrap current->cred and a few other accessors to hide their actual
implementation.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-usb@vger.kernel.org
Signed-off-by: NJames Morris <jmorris@namei.org>

The usb_free_urb comment says that the transfer buffer will not be
freed, but this is not the case when URB_FREE_BUFFER is set.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1155) fixes a bug in usbcore.  When interfaces are
deleted, either because the device was disconnected or because of a
configuration change, the extra attribute files and child endpoint
devices may get left behind.  This is because the core removes them
before calling device_del().  But during device_del(), after the
driver is unbound the core will reinstall altsetting 0 and recreate
those extra attributes and children.

The patch prevents this by adding a flag to record when the interface
is in the midst of being unregistered.  When the flag is set, the
attribute files and child devices will not be created.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org> [2.6.27, 2.6.26, 2.6.25]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1153) fixes a potential problem in hub initialization.
Starting in 2.6.28, initialization was split into several tasks to
help speed up booting.  This opens the possibility that the hub may be
autosuspended before all the initialization tasks can complete.

Normally that wouldn't matter, but with incomplete initialization
there is a risk that the hub would never autoresume -- especially if
devices were plugged into the hub beforehand.  The solution is a
simple one-line change to suppress autosuspend until the
initialization is finished.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1151) protects usbcore against drivers that try to
unlink an URB after the URB's device or bus have been removed.  The
core does not currently check for this, and certain drivers can cause
a crash if they are running while an HCD is unloaded.

Certainly it would be best to fix the guilty drivers.  But a little
defensive programming doesn't hurt, especially since it appears that
quite a few drivers need to be fixed.

The patch prevents the problem by grabbing a reference to the device
while an unlink is in progress and using a new spinlock to synchronize
unlinks with device removal.  (There's no need to acquire a reference
to the bus as well, since the device structure itself keeps a
reference to the bus.)  In addition, the kerneldoc is updated to
indicate that URBs should not be unlinked after the disconnect method
returns.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1152) may help prevent some problems associated with the
new policy of unbinding drivers that don't support suspend/resume or
pre_reset/post_reset.  If for any reason the resume or reset fails, and
the device is logically disconnected, there's no point in trying to
rebind the driver.  So the patch checks for success before carrying
out the unbind/rebind.

There was a report from one user that this fixed a problem he was
experiencing, but the details never became fully clear.  In any case,
adding these tests can't hurt.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds initial_descriptor_timeout module parameter for usbcore.ko
to allow modify initial 64-byte USB_REQ_GET_DESCRIPTOR timeout for
non-standard devices.

For example, the SATA8000 device from DATAST0R Technology Corp
requires about 10 seconds to send reply (probably it waits until
inserted disk is ready for operation).

Also, this patch adds missing usbcore parameters to
Documentation/kernel-parameters.txt.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Create a new sysfs file per interface named supports_autosuspend.  This
file returns true if an interface driver's .supports_autosuspend flag is
set.  It also returns true if the interface is unclaimed (since the USB
core will autosuspend a device if an interface is not claimed).

This new sysfs file will be useful for user space scripts to test whether
a USB device correctly auto-suspends.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1148) adds a new "snoop" message to usbfs when a device
file is opened, identifying the process responsible.  This comes in
extremely handy when trying to determine which program is doing some
unwanted USB access.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1139) adds a warning to the system log whenever ehci-hcd
is loaded after ohci-hcd or uhci-hcd.  Nowadays most distributions are
pretty good about not doing this; maybe the warning will help convince
anyone still doing it wrong.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>  [2.6.27]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This extends the anchor API as btusb needs for autosuspend.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1137) changes the hub_activate() routine, replacing the
power-power-up and debounce delays with delayed_work calls.  The idea
is that on systems where the USB stack is compiled into the kernel
rather than built as modules, these delays will no longer block the
boot thread.  At least 100 ms is saved for each root hub, which can
add up to a significant savings in total boot time.

Arjan van de Ven was very pleased to see that this shaved 700 ms off
his computer's boot time.  Since his total boot time is on the order
of two seconds, the improvement is considerable.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reset upon resumption will wipe the input buffer and is therefore
a reason to not suspend if remote wakeup is requested because
the driver needs that data.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this extends the poisoning concept to anchors. This way poisoning
will work with fire and forget drivers.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>