This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens.

The touchscreen sends data in 8-byte packets.
BYTE 0 - unknown meaning, seen only one value: 0x54
BYTE 1 - unknown meaning, 3 lowest bits indicate touch state
        values seen: 0x81, 0x82 or 0x83
        bit 0 = set if the screen is touched and was not touched before (touch
        bit 1 = set if the screen is touched and was touched (dragging)
        bit 2 = set if the touch was ended (release)
BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF
BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF
BYTE 6 - unknown meaning, seen only one value: 0xFF
BYTE 7 - unknown meaning, seen only one value: 0x00
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.

Also, do not access input_dev->private directly, use helpers.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Make the driver report Y/RY up as positive value and down as negative. Also
make DPAD mapping the same as classic xpad.
Reported-by: NBrian Magnuson <bdmagnuson@gmail.com>
Tested-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

xpad_play_effect() does not need to be global.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAndi Drebes <lists-receive@programmierforen.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Adds support for simulating a mouse using GPIO lines. The driver
needs an appropriate platform device to be created by architecture
code.

The driver has been tested on AT32AP7000 microprocessor using the
ATSTK1000 development board.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Implement getkeycode and setkeycode methods for the device so
EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Switch to using input-polldev skeleton instead of implementing
polling loop by itself.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add support to wistron_btns for leds that come with the multimedia keys.
Mail and wifi leds are supported, on laptops which have them.

Depending on the laptop, wifi subsystem may control just the led, or both
the led and the wifi card. Wifi led interface is activated only for the
former type of laptops, as the latter type is already managed. Leds are
controled by the interface in /sys/class/leds.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden
for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of
latency should be still fine for the user. In order to keep fluent the feeling
when the user is pressing several keys in a raw (such as changing the volume),
the frequency is increased for a short duration after a key is pressed.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Update credits and version number to 2.3
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Function keys (also called macro keys) code corrected. Using a
lastMacro variable to keep track of key currently pressed. This
ensures proper resetting when dragging the pen in the drawing
area or to another key. Also suppress sending pressure reports
when over the macro key area.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now echo "some value" > /sys/......./somefile is also acceptable.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now the old tool is remembered, and reset when a new tool is
selected via the sysfs files.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

To get an on - off reporting for proximity, absolute misc reports are
used. The mixture of absolute and relative reports is awkward
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Added warnings to the points where the tablet probe may fail
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Have to use set_bit since some bit values are over 32, and bitwise or
won't work on these. To be safe for the future too, use set_bit for all
input dev capabilities
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Corrections to relative mode, was looking at wrong byte
Signed-off-by: NMark Vytlacil <mrv@wi.rr.com>
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Mouse button defines tested the wrong bits, now fixed
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Calculation of proximity bit and of data valid bits were reversed for
stylus reports.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Small fix that corrects the documentation on the report byte
format produced by the mouse
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When setting up input device use an array to list all the buttons
instead of setting every bit separately.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is no reason to do that, just tell the compiler that
we are dealing with signed values in buffer, that's it.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use maps to convert for strings to internal constants and vice versa
in aiptek's sysfs attribute methods instead of open-coding it. This
results in smaller code that is also easier to maintain.

[Rene: fix a typo - stylys instead of stylus]
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It makes no sense to check for NULL in attribute methods -
we do usb_set_intfdata before creating attributes and once
attributes have been removed we are guaranteed to not be
called.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use attribute group to simplify error handling and reduce code.

[Rene: add missing NULL to properly terminate aiptek_attributes]
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

They are already exported by input core; there is no need to do it twice.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Do not try to export via sysfs associated event device - it does not
work when evdev is a module that is loaded after aiptek; also it pokes
too deply into input core internals.

Userspace should rely on udev to set up permanent device name for
the tablet.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Cortron PS/2 Trackballs (700-0001A) report the 4th button using the 4th
bit of the first packet (yes, it breaks the standard PS/2 protocol).
This patch adds an extra protocol to generate BTN_SIDE based on the 4th
bit. There's no way to detect those trackballs using any kind of special
sequence, thus the protocol must be activated explicitely by writing
into 'protocol' sysfs attribute:

	echo -n "cortps" > /sys/devices/platform/i8042/serio1/protocol
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Implementation is using force feedback support for memoryless devices.
Signed-off-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Xbox 360 gamepad is slightly different then the previous model so it has
its own version of process_packet method. Detection of this new device
relies on USB_DEVICE_INTERFACE_PROTOCOL macro. This device got vendor
specific subclass so it can't be matched with USB_INTERFACE_INFO and
we need only one interface protocol from four availaible. It means
USB_DEVICE can't be used either.

Added xpad360_btn structure with additional buttons for x360 gamepad.
Added xtype into xpad_device structure to distinguish between different
types of xbox devices.
Signed-off-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The USB_DEVICE_INTERFACE_PROTOCOL will allow to match one interface
protocol of vendor specific device. This macro is used in patch adding
support for xbox360 to xpad.c
Signed-off-by: NJan Kratochvil <honza@jikos.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (31 commits)
  firewire: fw-sbp2: fix DMA mapping of management ORBs
  firewire: fw-sbp2: fix DMA mapping of command ORBs
  firewire: fw-sbp2: fix DMA mapping of S/G tables
  firewire: fw-sbp2: add a boundary check
  firewire: fw-sbp2: correctly align page tables
  firewire: fw-sbp2: memset wants string.h
  firewire: fw-sbp2: use correct speed in sbp2_agent_reset
  firewire: fw-sbp2: correctly dereference by container_of
  firewire: Document userspace ioctl interface.
  firewire: fw-sbp2: implement nonexclusive login
  firewire: fw-sbp2: let SCSI shutdown commands through before logout
  firewire: fw-sbp2: implement max sectors limit for some old bridges
  firewire: simplify a struct type
  firewire: support S100B...S400B and link slower than PHY
  firewire: optimize gap count with 1394b leaf nodes
  firewire: remove unused macro
  firewire: missing newline in printk
  firewire: fw-sbp2: remove unused struct member
  ieee1394: remove old isochronous ABI
  ieee1394: sbp2: change some module parameters from int to bool
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: handle cases of volume knobs generating relative values
  HID: Logitech keyboard 0xc311 needs reset leds quirk
  HID: support for logitech cordless desktop LX500 special mapping
  HID: fix autocentering of PID devices
  HID: separate quirks for report descriptor fixup
  HID: Add NOGET quirk for all NCR devices
  HID: support for Petalynx Maxter remote control
  HID: fix mismatch between hid-input HUT find/search mapping and the HUT
  HID: support for Gameron dual psx adaptor
  USB HID: avoid flush_scheduled_work()
  HID: Use menuconfig objects
  HID: force hid-input for Microsoft SideWinder GameVoice device
  HID: input mapping for Chicony KU-0418 tactical pad
  HID: make debugging output runtime-configurable

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (75 commits)
  Ethernet driver for EISA only SNI RM200/RM400 machines
  Extract chip specific code out of lasi_82596.c
  ehea: Whitespace cleanup
  pasemi_mac: Fix TX interrupt threshold
  spidernet: Replace literal with const
  r8169: perform RX config change after mac filtering
  r8169: mac address change support
  r8169: display some extra debug information during startup
  r8169: add endianess annotations to [RT]xDesc
  r8169: align the IP header when there is no DMA constraint
  r8169: add bit description for the TxPoll register
  r8169: cleanup
  r8169: remove the media option
  r8169: small 8101 comment
  r8169: confusion between hardware and IP header alignment
  r8169: merge with version 8.001.00 of Realtek's r8168 driver
  r8169: merge with version 6.001.00 of Realtek's r8169 driver
  r8169: prettify mac_version
  r8169: populate the hw_start handler for the 8110
  r8169: populate the hw_start handler for the 8168
  ...

The CPU must not touch the buffer after it was DMA-mapped.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>

The CPU must not touch the buffer after it was DMA-mapped.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NKristian Høgsberg <krh@redhat.com>