Instead of doing slot table pointer gymnastics every time we want to
know which slot we're using.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the session pointer into the slot table, then have struct nfs4_slot
point to that slot table.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Store the renewal time inside the session slot instead.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All that memory is going to be initialised to non-zero by
nfs4_add_and_init_slots anyway.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We must always bump the clientid sequence number after a successful
call to CREATE_SESSION on the server. The result of
nfs4_verify_channel_attrs() is irrelevant to that requirement.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we're mounting a new filesystem, ensure that the session has negotiated
large enough request and reply sizes to match the wsize and rsize mount
arguments.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't store the target request and response sizes in the same
variables used to store the server's replies to those targets.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We can't send a SEQUENCE op unless the session is OK, so it is pointless
to handle the CHECK_LEASE state before we've dealt with SESSION_RESET
and BIND_CONN_TO_SESSION.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If I mount an NFS v4.1 server to a single client multiple times and then
run xfstests over each mountpoint I usually get the client into a state
where recovery deadlocks.  The server informs the client of a
cb_path_down sequence error, the client then does a
bind_connection_to_session and checks the status of the lease.

I found that bind_connection_to_session sets the NFS4_SESSION_DRAINING
flag on the client, but this flag is never unset before
nfs4_check_lease() reaches nfs4_proc_sequence().  This causes the client
to deadlock, halting all NFS activity to the server.  nfs4_proc_sequence()
is only called by the state manager, so I can change it to run in privileged
mode to bypass the NFS4_SESSION_DRAINING check and avoid the deadlock.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we set the return value for nfs_page_async_flush()
to zero! (Reported-by: Dros Adamson)
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

An EAGAIN return value would be unexpected, but there is no reason to
BUG...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Convert the ones that are not trivial to check into WARN_ON_ONCE().
Remove checks for things such as NFS2_MAXPATHLEN, which are trivially
done by the caller.

Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being
done there is just wrong...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the nfs_client fails to initialise correctly, then it will
return an error condition.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue
context.  This avoids a deadlock where rpc_shutdown_client loops forever
in a workqueue kworker context, trying to kill all RPC tasks associated with
the client, while one or more of these tasks have already been assigned to the
same kworker (and will never run rpc_exit_task).

This approach is needed because RPC tasks that have already been assigned
to a kworker by queue_work cannot be canceled, as explained in the comment
for workqueue.c:insert_wq_barrier.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
[Trond: add module_get/put.]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since commit c7f404b4 ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
device name reported back to userland.

nfs_path() always generates a trailing slash when the given dentry is
the root of an NFS mount, but userland may expect the original device
name to be returned verbatim (as it used to be).  Make this
canonicalisation optional and change the callers accordingly.

[jrnieder@gmail.com: use flag instead of bool argument]
Reported-and-tested-by: NChris Hiestand <chiestand@salk.edu>
Reference: http://bugs.debian.org/669314Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In very busy v3 environment, rpc.mountd can respond to the NULL
procedure but not the MNT procedure in a timely manner causing
the MNT procedure to time out. The problem is the mount system
call returns EIO which causes the mount to fail, instead of
ETIMEDOUT, which would cause the mount to be retried.

This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to
the rpc_call_sync() call in nfs_mount() which causes
ETIMEDOUT to be returned on timed out connections.
Signed-off-by: NSteve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

The new layout pointer in pnfs_find_alloc_layout() may be NULL because of
out of memory. we must do some check work, otherwise pnfs_free_layout_hdr()
will go wrong because it can not deal with a NULL pointer.
Signed-off-by: NYanchuan Nian <ycnian@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The DNS resolver's use of the sunrpc cache involves a 'ttl' number
(relative) rather that a timeout (absolute).  This confused me when
I wrote
  commit c5b29f88
     "sunrpc: use seconds since boot in expiry cache"

and I managed to break it.  The effect is that any TTL is interpreted
as 0, and nothing useful gets into the cache.

This patch removes the use of get_expiry() - which really expects an
expiry time - and uses get_uint() instead, treating the int correctly
as a ttl.

This fixes a regression that has been present since 2.6.37, causing
certain NFS accesses in certain environments to incorrectly fail.
Reported-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NChuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the state recovery machinery is triggered by the call to
nfs4_async_handle_error() then we can deadlock.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

If we do not release the sequence id in cases where we fail to get a
session slot, then we can deadlock if we hit a recovery scenario.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Currently, we will schedule session recovery and then return to the
caller of nfs4_handle_exception.  This works for most cases, but causes
a hang on the following test case:

	Client				Server
	------				------
	Open file over NFS v4.1
	Write to file
					Expire client
	Try to lock file

The server will return NFS4ERR_BADSESSION, prompting the client to
schedule recovery.  However, the client will continue placing lock
attempts and the open recovery never seems to be scheduled.  The
simplest solution is to wait for session recovery to run before retrying
the lock.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

returning PTR_ERR(cb_info->task) just after we have set it to
NULL looks like a typo...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix a warning about "no previous prototype for ‘nfs4_get_rootfh’"
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't circumvent the array size checks.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the call to pnfs_return_layout() to the read and write rpc_release()
callbacks, so that it gets called from nfsiod, which is a more appropriate
context.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is nothing to prevent another thread from dereferencing ds->ds_clp
during or after the call to nfs4_ds_disconnect(), and Oopsing due to the
resulting NULL pointer.

Instead, we should just rely on filelayout_mark_devid_invalid() to keep
us out of trouble by avoiding that deviceid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>	#arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is not needed at all and it is messing with return values...
Reported-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For buffer read, use offst-to-isize.

For direct read, use dreq->bytes_left.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.

For direct write, both block layout and object layout use dreq->bytes_left.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>