Add an option to preserve LED state when suspending/resuming to the LED
gpio driver. Based on a suggestion from Robert Jarzmik.
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Add a simple driver for pwm driver LEDs.  pwm_id and period can be defined
in board file.  It is developed for pxa, however it is probably generic
enough to be used on other platforms with pwm.
Signed-off-by: NLuotao Fu <l.fu@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

You can't have multiple module_init()/module_exit calls so resort to messy
ifdefs potentially pending some code refactoring.
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Add an LED driver using the DAC124S085 DAC from NatSemi

[randy.dunlap@oracle.com: use header files for interfaces]
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

This patch allows drivers to override the default maximum brightness value
of 255.  We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

Add bindings to support LEDs defined as of_platform devices in addition to
the existing bindings for platform devices.

New options in Kconfig allow the platform binding code and/or the
of_platform code to be turned on.  The of_platform code is of course only
available on archs that have OF support.

The existing probe and remove methods are refactored to use new functions
create_gpio_led(), to create and register one led, and delete_gpio_led(),
to unregister and free one led.  The new probe and remove methods for the
of_platform driver can then share most of the common probe and remove code
with the platform driver.

The suspend and resume methods aren't shared, but they are very short.  The
actual led driving code is the same for LEDs created by either binding.

The OF bindings are based on patch by Anton Vorontsov
<avorontsov@ru.mvista.com>.  They have been extended to allow multiple LEDs
per device.
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NRichard Purdie <rpurdie@linux.intel.com>

This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Venki Pallipadi <venkatesh.pallipadi@intel.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Note that events from fixed hardware buttons now show up as a special
notify event, so to preserve user-space backward compatibility, we
convert that back to ACPI_BUTTON_NOTIFY_STATUS.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: NAlex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds support for ACPI device driver .notify() methods.  If
such a method is present, Linux/ACPI installs a handler for device
notifications (but not for system notifications such as Bus Check,
Device Check, etc).  When a device notification occurs, Linux/ACPI
passes it on to the driver's .notify() method.

In most cases, this removes the need for drivers to install their own
handlers for device-specific notifications.

For fixed hardware devices like some power and sleep buttons, there's
no notification value because there's no control method to execute a
Notify opcode.  When a fixed hardware device generates an event, we
handle it the same as a regular device notification, except we send
a ACPI_FIXED_HARDWARE_EVENT value.  This is outside the normal 0x0-0xff
range used by Notify opcodes.

Several drivers install their own handlers for system Bus Check and
Device Check notifications so they can support hot-plug.  This patch
doesn't affect that usage.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The da903x interrupt handler is retruning an int instead of an irqreturn_t.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Reverse the order of the tests for loop exit so we use a valid value
before we time out.  Vanishingly unlikely to happen since we retry for
several times the expected conversion time.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

This driver requests a clock that usually is supplied by the MFD in which
the DS1WM is contained. Currently, it is impossible for a MFD to register
their clocks with the generic clock API due to different implementations
across architectures.
For now, this patch removes the clock handling from DS1WM altogether,
trusting that the MFD enable/disable functions will switch the clock if
needed. The clock rate is obtained from a new parameter in driver_data.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

This patch makes htc-pasic3 register the DS1WM and LED cell drivers
through the MFD core infrastructure instead of allocating the platform
devices manually. It also calculates the bus_shift parameter from the
memory resource size.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

This patch converts the DS1WM driver into an MFD cell. It also
calculates the bus_shift parameter from the memory resource size.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Some I2C controllers have high overheads for setting up I2C operations
which makes the register cache setup on startup excessively slow since
it does a lot of small transactions. Reduce this overhead by doing a
bulk read of the entire register bank and filtering out what we don't
need later.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

Removed duplicated #include <linux/device.h> in
  drivers/mfd/pcf50633-core.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>

The battery driver tends to take quite some time to initialize
(100ms-300ms is quite typical).
This patch initializes the batter driver asynchronously, so that other
things in the kernel can initialize in parallel to this 300 msec.

As part of this, the battery driver had to move to the back
of the ACPI init order (hence the Makefile change).
Without this move, the next ACPI driver would just block
on the ACPI/devicee layer semaphores until the battery driver was
done anyway, not gaining any boot time.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Explicitly note in the documentation that the Acer Aspire One is not
supported.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cleanup the failure cleanup handling for brightness and email led.

[cc: Split out from another patch]
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NLen Brown <len.brown@intel.com>

The Aspire One's ACPI-WMI interface is a placeholder that does nothing,
and the invalid results that we get from it are now causing userspace
problems as acer-wmi always returns that the rfkill is enabled (i.e. the
radio is off, when it isn't). As it's hardware controlled, acer-wmi
isn't needed on the Aspire One either.

Thanks to Andy Whitcroft at Canonical for tracking down Ubuntu's userspace
issues to this.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: NAndy Whitcroft <apw@canonical.com>
Cc: stable@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_video_device_write_state() and friends now return ssize_t,
while the constify patch assumed it was still int.
Signed-off-by: NLen Brown <len.brown@intel.com>

Refactor and redesign the brightness control backend...

In order to fix bugzilla #11750...

Add a new brightness control mode: support direct NVRAM checkpointing
of the backlight level (i.e. store directly to NVRAM without the need
for UCMS calls), and use that together with the EC-based control.
Disallow UCMS+EC, thus avoiding races with the SMM firmware.

Switch the models that define HBRV (EC Brightness Value) in the DSDT
to the new mode.  These are: T40-T43, R50-R52, R50e, R51e, X31-X41.

Change the default for all other IBM ThinkPads to UCMS-only.  The
Lenovo models already default to UCMS-only.
Reported-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Enhance debugging messages for the fan subdriver.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Enhance debugging messages for the hotkey subdriver.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Enhance debugging messages for all rfkill subdrivers in thinkpad-acpi.

Also, log a warning if the deprecated sysfs attributes are in use.
These attributes are going to be removed sometime in 2010.

There is an user-visible side-effect: we now coalesce attempts to
enable/disable bluetooth or WWAN in the procfs interface, instead of
hammering the firmware with multiple requests.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some of the ThinkPad LEDs indicate critical conditions that can cause
data loss or cause hardware damage when ignored (e.g. force-ejecting
a powered up bay; ignoring a failing battery, or empty battery; force-
undocking with the dock buses still active, etc).

On almost all ThinkPads, LED access is write-only, and the firmware
usually does fire-and-forget signaling on them, so you effectively
lose whatever message the firmware was trying to convey to the user
when you override the LED state, without any chance to restore it.

Restrict access to all LEDs that can convey important alarms, or that
could mislead the user into incorrectly operating the hardware.  This
will make the Lenovo engineers less unhappy about the whole issue.

Allow users that really want it to still control all LEDs, it is the
unaware user that we have to worry about.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

The HKEY disable functionality basically cripples the entire event
model of the ThinkPad firmware and of the thinkpad-acpi driver.
Remove this functionality from the driver.  HKEY must be enabled at
all times while thinkpad-acpi is loaded, and disabled otherwise.

For sysfs, according to the sysfs ABI and the thinkpad-acpi sysfs
rules of engagement, we will just remove the attributes.  This will be
done in two stages: disable their function now, after two kernel
releases, remove the attributes.

For procfs, we call WARN().  If nothing triggers it, I will simply
remove the enable/disable commands entirely in the future along with
the sysfs attributes.

I don't expect much, if any fallout from this.  There really isn't any
reason to mess with hotkey_enable or with the enable/disable commands
to /proc/acpi/ibm/hotkey, and this has been true for years...
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add a debug helper that discloses the TGID of the userspace task
attempting to access the driver.  This is highly useful when dealing
with bug reports, since often the user has no idea that some userspace
application is accessing thinkpad-acpi...

Also add a helper to log warnings about sysfs attributes that are
deprecated.

Use the new helpers to issue deprecation warnings for bluetooth_enable
and wwan_enabled, that have been deprecated for a while, now.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add missing log levels in a standalone commit, to avoid dependencies in
future unrelated changes, just because they wanted to use one of the
missing log levels.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fix the vdbg_printk macro definition to be sane when
CONFIG_THINKPAD_ACPI_DEBUG is undefined, and move the mess into a file
section of its own.

This doesn't change anything in the current code, but future code will
need the proper behaviour.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

The driver was renamed two years ago, on 2.6.21.  Drop the old
compatibility alias, we have given everybody quite enough time
to update their configs to the new name.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

It is that time of the year again...
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Instead of just sprintf() into the page-sized buffer provided
by the sysfs/device_attribute API, we use snprintf with PAGE_SIZE
as an additional safeguard.
Signed-off-by: NMartin Lucina <mato@kotelna.sk>
Signed-off-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds MODULE_DEVICE_TABLE() to panasonic-laptop.c in order
to ensure automatic loading of the module on systems with the respective
"MAT*" ACPI devices.
Signed-off-by: NMartin Lucina <mato@kotelna.sk>
Signed-off-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add a WMI driver for Dell laptops. Currently it does nothing but send a
generic input event when a button with a picture of a battery on it is
pressed, but maybe other uses will appear over time.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>