- 25 9月, 2006 40 次提交
-
-
由 Juha Yrjola 提交于
BUG() if the clock use count is already zero. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Hiroshi DOYU 提交于
In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1 and GPIO_IRQSTATUS2, even if the relevant bit is disabled in GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1 is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this will prevent the system from going to idle state. This patch also clears IRQSTATUS2 to avoid the above situation. Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Fix typo for 24xx GPIO resume Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
GPT1 will be set into non-posted mode, and the wakeup register is set for all timers. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
Some boards might use the oscillator clock for powering external peripherals. Add support for making sure osc_ck stays active even when trying to go to sleep. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Timo Teras 提交于
Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: NTimo Teras <timo.teras@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 David Brownell 提交于
Remove Remove superfluous/recursive locking for GPIO Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Fix spinlock recursion for dyntick. Modified version based on Imre Deak's earlier patch. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Komal Shah 提交于
ARM11 can't access the IVA interrupt controller from IVA slave port. From Richard Woodruff: "The 0x40000000 is an IVA-ARM7 local bus address. The IVA-INTC is NOT accessible through the IVA-L3-Slave Port. The current TRM does say this directly and indirectly in a few spots and in figures." Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This is needed to reset GPIO after free_irq(). Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
After adjusting clock parameters, OMAP2 CPUs need a memory barrier to make sure the changes go into effect immediately. Otherwise bad things will happen if we try to access the peripheral whose clock is just being enabled. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Samuel Ortiz 提交于
A forgotten parenthesis in clock.c caused the PLL stabilization loop to not be executed correctly. Signed-off-by: NSamuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Timo Teras 提交于
This patch makes the OMAP2 dmtimers module using the interface clocks only while the registers are accessed (except GPT1 which has iclk enabled all the time). Signed-off-by: NTimo Teras <timo.teras@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Also export some omap24xx specific DMA functions. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Imre Deak 提交于
Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: NImre Deak <imre.deak@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jonathan McDowell 提交于
This patch adds some further #defines regarding GPIOs and latch bits for the Amstrad Delta; the drivers that use them will be submitted at a later date but there's no reason not to have the information already there and available for use. Signed-off-by: NJonathan McDowell <noodles@earth.li> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jonathan McDowell 提交于
The recent MPUIO range change fix breaks compilation if CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not MAX_GPIO_LINES I believe. This one liner fixes it. Signed-off-by: NJonathan McDowell <noodles@earth.li> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Mark Howell 提交于
This patch adds pin mux info for the SPI master/slave interface on OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my 1611/H2 with current git kernel. Signed-off-by: NMark Howell <mhowell@northlink.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Imre Deak 提交于
We have to make sure that the LCD DMA external destination bit is cleared by default, otherwise OMAP won't sleep. Signed-off-by: NImre Deak <imre.deak@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Imre Deak 提交于
- MPUIO doesn't exist on OMAP2 - no error was returned for too big MPUIO numbers Signed-off-by: NImre Deak <imre.deak@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
McBSP does not need sys_ck or sys_clkout. If the devices connected to McBSP need sys_clkout, they need to request it. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kyungmin Park 提交于
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kevin Hilman 提交于
ARM: OMAP: Fix SRAM static mapping for EMU devices. Fix SRAM static mapping for EMU devices. Signed-off-by: NKevin Hilman <khilman@deeprooted.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Samuel Ortiz 提交于
Signed-off-by: NSamuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Imre Deak 提交于
Reprogramming takes places before putting the CPU into idle mode if the dynamic tick option is enabled. The timer is then set to expire at the next pending timer event. Because some time has already passed since the last reported jiffy we have to wait less than the time specified in jiffies. Also make sure we don't set a load value of 0 whose outcome is unspecified according to the TRM. Signed-off-by: NImre Deak <imre.deak@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
If we call clk_get() from arch_reset we get ugly messages before reboot. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
To whoever had written that code: a) priority of >> is higher than that of & b) priority of typecast is higher than that of any binary operator c) learn the fscking C Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
ql3xxx_probe() does ioremap and stores result in ->mem_map_registers. On failure exit it does iounmap() of the same thing. OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is (a) never assigned and (b) never used other than in that iounmap() call. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
the driver is still shite, though... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthew Wilcox 提交于
Some user tools parse /proc/scsi/scsi, so we can't yet change the names. Change the existing ones back to their old names, and add an admonition to not make the same mistake that I did. Andrew Morton reports that this was breaking YDL 4.1 userspace. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.infradead.org/~dwmw2/khdrs-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/~dwmw2/khdrs-2.6: Don't remove $(INSTALL_HDR_PATH)/install before headers_install.
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
marked as such... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
no ioread*(), for one thing Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-