Commit f0a3eaff (ARM64: KVM: fix big endian issue in
access_vm_reg for 32bit guest) changed the way we handle CP15
VM accesses, so that all 64bit accesses are done via vcpu_sys_reg.

This looks like a good idea as it solves indianness issues in an
elegant way, except for one small detail: the register index is
doesn't refer to the same array! We end up corrupting some random
data structure instead.

Fix this by reverting to the original code, except for the introduction
of a vcpu_cp15_64_high macro that deals with the endianness thing.

Tested on Juno with 32bit SMP guests.

Cc: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Just like GICv2 was fixed in 63afbe7a
(kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform),
mandate the GICV region to be both aligned on a page boundary and
its size to be a multiple of page size.

This prevents a guest from being able to poke at regions where we
have no idea what is sitting there.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Commit 72c58395 (arm64: gicv3: Allow GICv3 compilation with
older binutils) changed the way we express the GICv3 system registers,
but couldn't change the occurences used by KVM as the code wasn't
merged yet.

Just fix the accessors.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Enable trapping of the debug registers, preventing the guests to
mess with the host state (and allowing guests to use the debug
infrastructure as well).
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Implement switching of the debug registers. While the number
of registers is massive, CPUs usually don't implement them all
(A57 has 6 breakpoints and 4 watchpoints, which gives us a total
of 22 registers "only").

Also, we only save/restore them when MDSCR_EL1 has debug enabled,
or when we've flagged the debug registers as dirty. It means that
most of the time, we only save/restore MDSCR_EL1.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add handlers for all the AArch32 debug registers that are accessible
from EL0 or EL1. The code follow the same strategy as the AArch64
counterpart with regards to tracking the dirty state of the debug
registers.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We now have multiple tables for the various system registers
we trap. Make sure we check the order of all of them, as it is
critical that we get the order right (been there, done that...).
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

An interesting "feature" of the CP14 encoding is that there is
an overlap between 32 and 64bit registers, meaning they cannot
live in the same table as we did for CP15.

Create separate tables for 64bit CP14 and CP15 registers, and
let the top level handler use the right one.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we're about to trap a bunch of CP14 registers, let's rework
the CP15 handling so it can be generalized and work with multiple
tables.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add handlers for all the AArch64 debug registers that are accessible
from EL0 or EL1. The trapping code keeps track of the state of the
debug registers, allowing for the switch code to implement a lazy
switching strategy.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In order to be able to use the DBG_MDSCR_* macros from the KVM code,
move the relevant definitions to the obvious include file.

Also move the debug_el enum to a portion of the file that is guarded
by #ifndef __ASSEMBLY__ in order to use that file from assembly code.
Acked-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

pm_fake doesn't quite describe what the handler does (ignoring writes
and returning 0 for reads).

As we're about to use it (a lot) in a different context, rename it
with a (admitedly cryptic) name that make sense for all users.
Reviewed-by: NAnup Patel <anup.patel@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Fix issue with 32bit guests running on top of BE KVM host.
Indexes of high and low words of 64bit cp15 register are
swapped in case of big endian code, since 64bit cp15 state is
restored or saved with double word write or read instruction.

Define helper macro to access low words of 64bit cp15 register.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Since size of all sys registers is always 8 bytes. Current
code is actually endian agnostic. Just clean it up a bit.
Removed comment about little endian. Change type of pointer
from 'void *' to 'u64 *' to enforce stronger type checking.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Fix vgic_bitmap_get_reg function to return 'right' word address of
'unsigned long' bitmap value in case of BE 64bit image.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

esr_el2 field of struct kvm_vcpu_fault_info has u32 type.
It should be stored as word. Current code works in LE case
because existing puts least significant word of x1 into
esr_el2, and it puts most significant work of x1 into next
field, which accidentally is OK because it is updated again
by next instruction. But existing code breaks in BE case.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In case of guest CPU running in LE mode and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Previous patches addresses ARMV7 big-endian virtualiztion,
kvm related issues, so enable ARM_VIRT_EXT for big-endian
now.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Fix code that handles KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls to work in BE
image. Before this fix get/set_one_reg functions worked correctly only in
LE case - reg_from_user was taking 'void *' kernel address that actually could
be target/source memory of either 4 bytes size or 8 bytes size, and code copied
from/to user memory that could hold either 4 bytes register, 8 byte register
or pair of 4 bytes registers.

In order to work in endian agnostic way reg_from_user to reg_to_user functions
should copy register value only to kernel variable with size that matches
register size. In few place where size mismatch existed fix issue on macro
caller side.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In case of status register E bit is not set (LE mode) and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

According to recent clarifications of mmio.data array meaning -
the mmio.data array should hold bytes as they would appear in
memory. Vgic is little endian device. And in case of BE image
kernel side that emulates vgic, holds data in BE form. So we
need to byteswap cpu<->le32 vgic registers when we read/write them
from mmio.data[].

Change has no effect in LE case because cpu already runs in le32.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The __kvm_vcpu_run function returns a 64-bit result in two registers,
which has to be adjusted for BE case.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In some cases the mcrr and mrrc instructions in combination with the ldrd
and strd instructions need to deal with 64bit value in memory. The ldrd
and strd instructions already handle endianness within word (register)
boundaries but to get effect of the whole 64bit value represented correctly,
rr_lo_hi macro is introduced and is used to swap registers positions when
the mcrr and mrrc instructions are used. That has the effect of swapping
two words.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The vgic h/w registers are little endian; when BE asm code
reads/writes from/to them, it needs to do byteswap after/before.
Byteswap code uses ARM_BE8 wrapper to add swap only if
CONFIG_CPU_BIG_ENDIAN is configured.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

HSCTLR.EE is defined as bit[25] referring to arm manual
DDI0606C.b(p1590).
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NLi Liu <john.liuli@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the last missing bits that enable GICv2 emulation on top of
GICv3 hardware.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce the GICv3 world switch code used to save/restore the
GICv3 context.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce the support code for emulating a GICv2 on top of GICv3
hardware.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

GICv3 requires the IMO and FMO bits to be tightly coupled with some
of the interrupt controller's register switch.

In order to have similar code paths, move the manipulation of these
bits to the GICv2 switch code.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the GICv2 world switch code into its own file, and add the
necessary indirection to the arm64 switch code.

Also introduce a new type field to the vgic_params structure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We already have __hyp_text_{start,end} to express the boundaries
of the HYP text section, and __kvm_hyp_code_{start,end} are getting
in the way of a more modular world switch code.

Just turn __kvm_hyp_code_{start,end} into #defines mapping the
linker-emited symbols.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

So far, irqchip_in_kernel() was implemented by testing the value of
vctrl_base, which worked fine with GICv2.

With GICv3, this field is useless, as we're using system registers
instead of a emmory mapped interface. To solve this, add a boolean
flag indicating if the we're using a vgic or not.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Brutally hack the innocent vgic code, and move the GICv2 specific code
to its own file, using vgic_ops and vgic_params as a way to pass
information between the two blocks.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move all the data specific to a given GIC implementation into its own
little structure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the code dealing with enabling the VGIC on to vgic_ops.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Instead of directly messing with with the GICH_VMCR bits for the CPU
interface save/restore code, add accessors that encode/decode the
entire set of registers exposed by VMCR.

Not the most efficient thing, but given that this code is only used
by the save/restore code, performance is far from being critical.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the code dealing with LR underflow handling to its own functions,
and make them accessible through vgic_ops.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Instead of directly dealing with the GICH_MISR bits, move the code to
its own function and use a couple of public flags to represent the
actual state.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the GICH_EISR access to its own function.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the GICH_ELRSR access to its own functions, and add them to
the vgic_ops structure.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>