- spread out the namespace on a per driver basis

 - clean up the functions

 - get rid of macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Remove the *_APIC_ID_MASK subarch definitions and move them straight
to the genapic driver initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of wrapper macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of macro wrappers

 - small cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the mps_oem_check() namespace on a per APIC driver basis
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

 - allow NULL ->mps_oem_check() entries

 - clean up the code flow
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Refactor the ->phys_pkg_id() methods:

 - namespace separation

 - macro wrapper removal

 - open-coded calls to the methods in the generic code
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- unify the call signature of 64-bit to that of 32-bit

 - clean up the types all around

 - clean up namespace contamination
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- eliminate the needless es7000_enable_apic_mode() complication which
  was not apparent prior the namespace cleanups

- clean up the control flow in es7000_enable_apic_mode()

- other cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only ES7000 has a real ->enable_apic_mode() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace to per driver methods

 - extend it to 64-bit as well so that we can use
   apic->check_phys_apicid_present() unconditionally
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Also move the NUMAQ method from the header file into the
 apic driver .c file.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.

All other genapic templates can have a NULL ->multi_timer_check()
callback.

Also, extend the generic code to treat a NULL pointer accordingly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - move the default vector-allocation-domain to mach-generic

 - fix whitespace damage
Signed-off-by: NIngo Molnar <mingo@elte.hu>

These flags are completely unused. (the in-kernel IRQ balancer has
been removed from the upstream kernel.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up these methods - to make it clearer which function is
used in which case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This field name was unreasonably long - shorten it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in
a rather nasty way by re-defining it to zero. That is infinitely
fragile and makes it very hard to see what to code really does in
a given context. The very same constant has different meanings and
values - depending on which subarch is enabled.

Untangle this mess by never undefining the constant, but instead
propagating the right values into the genapic driver templates.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the ->ESR_DISABLE shouting variant was used to enable the esr_disable
macro wrappers. Those ugly macros are removed now so we can rename
->ESR_DISABLE to ->disable_esr
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Most subarchitectures want to disable the APIC ESR (Error Status Register),
because they generally have hardware hacks that wrap standard CPUs into
a bigger system and hence the APIC bus is quite non-standard and weirdnesses
(lockups) have been seen with ESR reporting.

Remove the esr_disable macros and put the desired flag into each
subarchitecture's genapic template directly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

use apic->target_cpus() directly instead of the TARGET_CPUS wrapper.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Clean up all the target_cpus() namespace overlap that exists
between bigsmp, es7000, mach-default, numaq and summit - by
separating the different functions into different names.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove leftover definition.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_es7000
driver template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_bigsmp
driver template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_numaq template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_summit template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_default template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.

The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.

Furthermore, it also obscures subarchitecture details.

So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...

The standard naming for such attributes is 'irq' - so rename the following
fields and macros:

 int_delivery_mode => irq_delivery_mode
 INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
 int_dest_mode     => irq_dest_mode
 INT_DEST_MODE     => IRQ_DEST_MODE
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.

Untangle this namespace spaghetti by giving each of the instances
a separate name.

Also remove wrapper macro obfuscation.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: refactor code

x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.

Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.

Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>