Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

When using DT binding to pass private data, there would be Kernel panic
occuring due to NULL pointer access in wm8962_i2c_probe(). Thus fix it.
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This is more idiomatic and is required for robust operation since we must
ensure that the clocking configuration is valid as rapidly as possible.
Signed-off-by: NMark Brown <broonie@linaro.org>

This is more idiomatic and fixes bugs in the error handling paths.
Signed-off-by: NMark Brown <broonie@linaro.org>

The accessory detect debounce work is not performance sensitive so let
the scheduler run it wherever is most efficient rather than in a per CPU
workqueue by using the system power efficient workqueue.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently after playing any audio file, we get the following error message:

$ aplay clarinet.wav
Playing WAVE 'clarinet.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
$ wm8962 0-001a: Unsupported sysclk ratio 544

This error message appears about 5 seconds after the audio playback has
finished.

Quoting Mark Brown [1]:

"The issue here is triggered by the machine
switching from the FLL to direct MCLK usage where the MCLK isn't
generating a useful ratio.

I suspect we should just kill the configure_bclk() in set_sysclk(), that
one isn't safe as we can't reconfigure a live SYSCLK and it's probably
the one that generates your warnings."

Confirmed that the "Unsupported sysclk ratio" error message comes from
wm8962_set_dai_sysclk(), so get rid of wm8962_configure_bclk() inside this
function.

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2013-July/064241.htmlSigned-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

There is an error in merge commit 384b8345 on conflict resolution which
causes the following NULL pdata pointer bug.

wm8962 0-001a: customer id 0 revision D
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = 80004000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #1
task: bf870000 ti: bf874000 task.ti: bf874000
PC is at wm8962_probe+0x134/0x6c8
LR is at regmap_unlock_mutex+0x10/0x14
pc : [<80452100>]    lr : [<80304cf4>]    psr: a0000113
sp : bf875c98  ip : 00000000  fp : bf875cd4
r10: 00000000  r9 : bfb1830c  r8 : 80779bc4
r7 : 00000000  r6 : 00000001  r5 : bfbac010  r4 : bfb33e00
r3 : 80304ce4  r2 : 00000000  r1 : 00000001  r0 : fffffffb
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 1000404a  DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0xbf874238)
Stack: (0xbf875c98 to 0xbf876000)
...

Fix the error by assigning pdata a correct pointer.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

This part of bias settings are essential for WM8962 to power up. Without it
"wm8962 0-001a: DC servo timed out" might be prompted due to power-up failure
that happens to FLL if being used.

The driver's also bringing the bias down in the suspend path so it needs to be
powered up in the resume path for symmetry.

According to dapm_pre_sequence_async(), DAPM would call pm_runtime_get_sync()
to let driver finish the bias settings in pm_runtime_resume() before the bias
level being set to STANDBY. So no need to worry about disordered settings for
VMID of WM8962.
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Also fix return values for headphone switch updates.
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

After the device has been reset we need to repeat the same
initialisation we do on probe to make sure that the device is in
a known state.
Tested-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Document the device tree binding for the WM8962 codec, and modify the
driver to extract platform data from the device tree, if present.

Based on work of WM8903 by Stephen Warren <swarren@nvidia.com>
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Embed a copy of struct wm8962_pdata in stuct wm8962_priv
so that there's no need to check validity of pdata any more.
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

If the FLL is being shut down we will exit early so there is no need to
check here and in fact we're checking the wrong thing anyway.
Reported-by: NGraeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add device tree support.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regulator_bulk_get() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The core will bring the bias level up for us since we use idle_bias_off,
duplicating this may be harmful.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Required for reliable power up from cold.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Ensure robust startup of the part by going through the reset procedure
prior to resyncing the full register cache, avoiding potential intermittent
faults in some designs.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

In order to support CODEC<->CODEC links remove the assumption that there
is only a single CODEC on a DAI link by removing the use of the CODEC
pointer in the rtd from the CODEC drivers. They are already being passed
their DAI whenever they are passed an rtd and can get the CODEC from
there.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

We can simply use the register cache code to synchronise the current
configuration down to the device when bringing up the DSP.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Save a little RAM.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The default pm_runtime status is enabled which is what we want.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Class W mode with sidetone is not fully supported.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The initial value can be changed depending on system configuration.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Avoids potential locking issues with anything that needs the CODEC lock.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This allows userspace control of final power off, allowing policy decisions
for register configuration retention.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Only enable and disable the FLL when explicitly told to, supporting some
additional use cases and making the driver behaviour more standard.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>