- 17 2月, 2011 9 次提交
-
-
由 Claudio Takahasi 提交于
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: NClaudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Claudio Takahasi 提交于
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: NClaudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
Separate LE and ACL timeouts. Othervise ACL connections on non LE hw will time out after 45 secs. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
Fix LE connections not being marked as master. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
l2cap over LE links can be disconnected without sending disconnect command first. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
Add support for LE server sockets. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
Add basic LE connection support to L2CAP. LE connection can be created by specifying cid in struct sockaddr_l2 Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
Bluetooth chips may have separate buffers for LE traffic. This patch add support to use LE buffers provided by the chip. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
Bluetooth V4.0 adds support for Low Energy (LE) connections. Specification introduces new set of hci commands to control LE connection. This patch adds logic to create, cancel and disconnect LE connections. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 15 2月, 2011 3 次提交
-
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Actually doesn't make sense have these modules built separately. The L2CAP layer is needed by almost all Bluetooth protocols and profiles. There isn't any real use case without having L2CAP loaded. SCO is only essential for Audio transfers, but it is so small that we can have it loaded always in bluetooth.ko without problems. If you really doesn't want it you can disable SCO in the kernel config. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 2月, 2011 2 次提交
-
-
由 Vasiliy Kulikov 提交于
struct sco_conninfo has one padding byte in the end. Local variable cinfo of type sco_conninfo is copied to userspace with this uninizialized one byte, leading to old stack contents leak. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vasiliy Kulikov 提交于
Struct ca is copied from userspace. It is not checked whether the "device" field is NULL terminated. This potentially leads to BUG() inside of alloc_netdev_mqs() and/or information leak by creating a device with a name made of contents of kernel stack. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 12 2月, 2011 1 次提交
-
-
由 Vasiliy Kulikov 提交于
Structure l2cap_options has one padding byte between max_tx and txwin_size fields. This byte in "opts" is copied to userspace uninitialized. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 10 2月, 2011 4 次提交
-
-
由 Ben Greear 提交于
My previous patch to optimize scanning on operating channel accidentally removed the code that would ensure power was set to maximum for scanning. This patch re-adds that functionality. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Greear 提交于
Narrow channel types can function within larger channel types. So, use existing channel type for work items when possible. This decreases hardware channel changes significantly when using non NO_HT channel types on the operating channel. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Greear 提交于
Previous code set the channel type to NO_HT, but it appears that NO_HT packets can be sent on any channel type, so we do not need to change the channel type as long as the channel is correct. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Greear 提交于
Some were indirectly set to NO_HT (zero), but I think it's better to explicitly set it in case the enum ever changes. In cfg.c, it seems the channel-type was just ignored (and thus always set to NO_HT). Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 2月, 2011 21 次提交
-
-
由 Gustavo F. Padovan 提交于
Change hcid to bluetoothd. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Also moves some L2CAP sending functions declaration to l2cap.h Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Declare __l2cap_wait_ack() and l2cap_sock_clear_timer() in l2cap.h Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It causes the move of the declaration of 3 functions to l2cap.h: l2cap_get_ident(), l2cap_send_cmd(), l2cap_build_conf_req() Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
First step to move all l2cap_sock_ops function to l2cap_sock.c Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
This patch tries to do the minimal to move l2cap_sock_create() and its dependencies to l2cap_sock.c. It create a API to initialize and cleanup the L2CAP sockets from l2cap_core.c through l2cap_init_sockets() and l2cap_cleanup_sockets(). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
In a preparation to the the L2CAP code split in many files. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Crash can happen when tasklet handling connect/disconnect requests preempts socket accept. Can be reproduced with "l2test -r" on one side and several "l2test -c -b 1000 -i hci0 -P 10 <bdaddr>" on the other side. disable taskets in socket accept and change lock_sock and release_sock to bh_lock_sock and bh_unlock_sock since we have to use spinlocks and there is no need to mark sock as owned by user. ... [ 3555.897247] Unable to handle kernel NULL pointer dereference at virtual address 000000bc [ 3555.915039] pgd = cab9c000 [ 3555.917785] [000000bc] *pgd=8bf3d031, *pte=00000000, *ppte=00000000 [ 3555.928314] Internal error: Oops: 17 [#1] PREEMPT [ 3555.999786] CPU: 0 Not tainted (2.6.32.21-13874-g67918ef #65) ... [ 3556.005981] PC is at bt_accept_unlink+0x20/0x58 [bluetooth] [ 3556.011627] LR is at bt_accept_dequeue+0x3c/0xe8 [bluetooth] ... [ 3556.161285] [<bf0007fc>] (bt_accept_unlink+0x20/0x58 [bluetooth]) from [<bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth]) [ 3556.172729] [<bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth]) from [<bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap]) [ 3556.184082] [<bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap]) from [<c026a0a8>] (sys_accept4+0x120/0x1e0) [ 3556.193969] [<c026a0a8>] (sys_accept4+0x120/0x1e0) from [<c002c9a0>] (ret_fast_syscall+0x0/0x2c) [ 3556.202819] Code: e5813000 e5901164 e580c160 e580c15c (e1d13bbc) ... Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Fix checkpatch warnings concerning assignments in if conditions. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds a new set_io_capability management command which is used to set the IO capability for Secure Simple Pairing (SSP) as well as the Security Manager Protocol (SMP). The value is per hci_dev and each hci_conn object inherits it upon creation. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds the necessary commands and events needed to communicate PIN code related actions between the kernel and userspace. This includes a pin_code_request event as well as pin_code_reply and pin_code_negative_reply commands. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-