Opcode C8.

Only ENTER with lexical nesting depth 0 is implemented, since others are
very rare.  We'll fail emulation if nonzero lexical depth is used so data
is not corrupted.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This allows us to reuse the code without populating ctxt->src and
overriding ctxt->op_bytes.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit 2adb5ad9 removed ByteOp from MOVZX/MOVSX, replacing them by
SrcMem8, but neglected to fix the dependency in the emulation code
on ByteOp.  This caused the instruction not to have any effect in
some circumstances.

Fix by replacing the check for ByteOp with the equivalent src.op_bytes == 1.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Opcode 9F.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Opcodes 0F 01 /0 and 0F 01 /1
Signed-off-by: NAvi Kivity <avi@redhat.com>

We correctly default to SS when BP is used as a base in 16-bit address mode,
but we don't do that for 32-bit mode.

Fix by adjusting the default to SS when either ESP or EBP is used as the base
register.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Opcode c9; used by some variants of Windows during boot, in big real mode.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The operand size for these instructions is 8 bytes in long mode, even without
a REX prefix.  Set it explicitly.

Triggered while booting Linux with emulate_invalid_guest_state=1.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Null SS is valid in long mode; allow loading it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Opcode 0F A2.

Used by Linux during the mode change trampoline while in a state that is
not virtualizable on vmx without unrestricted_guest, so we need to emulate
it is emulate_invalid_guest_state=1.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of getting an exact leaf, follow the spec and fall back to the last
main leaf instead.  This lets us easily emulate the cpuid instruction in the
emulator.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The instruction emulation for bsrw is broken in KVM because
the code always uses bsr with 32 or 64 bit operand size for
emulation. Fix that by using emulate_2op_SrcV_nobyte() macro
to use guest operand size for emulation.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Although ModRM byte is fetched for group decoding, it is soon pushed
back to make decode_modrm() fetch it later again.

Now that ModRM flag can be found in the top level opcode tables, fetch
ModRM byte before group decoding to make the code simpler.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed for the following patch which simplifies ModRM fetching code.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

'bool' wants 8-bit registers.
Reported-by: NTakuya Yoshikawa <takuya.yoshikawa@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed by some framebuffer drivers.  See

https://bugzilla.kernel.org/show_bug.cgi?id=42779Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

General support for the MMX instruction set.  Special care is taken
to trap pending x87 exceptions so that they are properly reflected
to the guest.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Used to write to framebuffers (by at least Icaros).
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

An Ubuntu 9.10 Karmic Koala guest is unable to boot or install due to
missing movdqa emulation:

kvm_exit: reason EXCEPTION_NMI rip 0x7fef3e025a7b info 7fef3e799000 80000b0e
kvm_page_fault: address 7fef3e799000 error_code f
kvm_emulate_insn: 0:7fef3e025a7b: 66 0f 7f 07 (prot64)

movdqa %xmm0,(%rdi)

[avi: mark it explicitly aligned]
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

x86 defines three classes of vector instructions: explicitly
aligned (#GP(0) if unaligned, explicitly unaligned, and default
(which depends on the encoding: AVX is unaligned, SSE is aligned).

Add support for marking an instruction as explicitly aligned or
unaligned, and mark MOVDQU as unaligned.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Task switches can switch between Protected Mode and VM86. The current
mode must be updated during the task switch emulation so that the new
segment selectors are interpreted correctly.

In order to let privilege checks succeed, rflags needs to be updated in
the vcpu struct as this causes a CPL update.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Setting the segment DPL to 0 for at least the VM86 code segment makes
the VM entry fail on VMX.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, all task switches check privileges against the DPL of the
TSS. This is only correct for jmp/call to a TSS. If a task gate is used,
the DPL of this take gate is used for the check instead. Exceptions,
external interrupts and iret shouldn't perform any check.

[avi: kill kvm-kmod remnants]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the guest thinks it's an AMD, it will not have prepared the SYSENTER MSRs,
and if the guest executes SYSENTER in compatibility mode, it will fails.

Detect this condition and #UD instead, like the spec says.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we treat MOVSX/MOVZX with a byte source as a byte instruction,
and change the destination operand size with a hack.  Change it to be
a word instruction, so the destination receives its natural size, and
change the source to be SrcMem8.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Useful for MOVSX/MOVZX.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

On hosts without this patch, 32bit guests will crash (and 64bit guests
may behave in a wrong way) for example by simply executing following
nasm-demo-application:

    [bits 32]
    global _start
    SECTION .text
    _start: syscall

(I tested it with winxp and linux - both always crashed)

    Disassembly of section .text:

    00000000 <_start>:
       0:   0f 05                   syscall

The reason seems a missing "invalid opcode"-trap (int6) for the
syscall opcode "0f05", which is not available on Intel CPUs
within non-longmodes, as also on some AMD CPUs within legacy-mode.
(depending on CPU vendor, MSR_EFER and cpuid)

Because previous mentioned OSs may not engage corresponding
syscall target-registers (STAR, LSTAR, CSTAR), they remain
NULL and (non trapping) syscalls are leading to multiple
faults and finally crashs.

Depending on the architecture (AMD or Intel) pretended by
guests, various checks according to vendor's documentation
are implemented to overcome the current issue and behave
like the CPUs physical counterparts.

[mtosatti: cleanup/beautify code]
Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

RDPMC is only privileged if CR4.PCE=0.  check_rdpmc() already implements this,
so all we need to do is drop the Priv flag.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Group 9: 0F C7

Rename em_grp9() to em_cmpxchg8b() and register it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Group 4: FE
Group 5: FF
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Group 1A: 8F

Register em_pop() directly and remove em_grp1a().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This was probably copy&pasted from the cr0 case, but it's unneeded here.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

INSB       : 6C
INSW/INSD  : 6D
OUTSB      : 6E
OUTSW/OUTSD: 6F

The I/O port address is read from the DX register when we decode the
operand because we see the SrcDX/DstDX flag is set.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

BSF: 0F BC
BSR: 0F BD
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

CMPXCHG: 0F B0, 0F B1
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

WRMSR: 0F 30
RDMSR: 0F 32
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

MOV: 0F 22 (move to control registers)
MOV: 0F 23 (move to debug registers)
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

CALL: E8
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

BT : 0F A3
BTS: 0F AB
BTR: 0F B3
BTC: 0F BB

Group 8: 0F BA
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>