- 28 1月, 2008 10 次提交
-
-
由 Ben Dooks 提交于
In the S3C2412 fclk is derived from msysclk, not straight from the MPLL output. Set clk_f.parent appropriately. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
The msysclk clock was checking for the wrong PLL for the parent in s3c2412_setparent_msysclk(), trying the UPLL instead of the MPLL output. Also ensure the mpll and fclks are at the same rate at init time. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
The current S3C24XX DMA code does not allow for an peripheral that has one channel for RX and another for TX. This patch adds a per-cpu dma operation to select the transmit or receive channel, and adds support to the S3C2412 for the seperate DMA channels for TX and RX. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep configuration of the GPIO blocks. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Add armclk to the S3C2412 to indicate the current clock connected to the ARM core. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Check if the sleep command returns due to a pending interrupt in the standby unit. If this happens, try and ack the IRQ before re-trying the resume. It is currently unclear whether the resume can be backed out of at this stage as this could cause a problem with level based interrupts. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Ensure that if the RTC IRQ is not selected for wake in the base configuration, then the PWRCFG has the same value set in it. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
S3C2412_GPESLPCON does not exist in the register mappings, so remove it. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
The IIS and SDI register hw_addr definitions are incorrect in the DMA map for the S3C2412. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
The S3C2412 GPIO is similar enough to the S3C2410 that it can use it as a base for GPIO functionality. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 1月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 10月, 2007 1 次提交
-
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 13 10月, 2007 2 次提交
-
-
由 Ben Dooks 提交于
Fix the IRQ numbers of the CF and SDI interface on the S3C2412 and S3C2413. Add support to handle these IRQs properly and ensure that the SDI controller platform device is correctly renumbered. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Krzysztof Helt 提交于
This patch removes section mismatches related to DMA functions. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Acked-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 7月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
Move register and other definitions out of the include/asm-arm/arch-s3c2410 into the the arch directories of include/asm-arm/plat-s3c24xx and include/asm-arm/plat-s3c. This move is in preperation of the merging of s3c2400 and s3c6400. The following git mv commands are needed before this patch can be applied: git mv include/asm-arm/arch-s3c2410/regs-ac97.h include/asm-arm/plat-s3c/regs-ac97.h git mv include/asm-arm/arch-s3c2410/regs-adc.h include/asm-arm/plat-s3c/regs-adc.h git mv include/asm-arm/arch-s3c2410/regs-iis.h include/asm-arm/plat-s3c24xx/regs-iis.h git mv include/asm-arm/arch-s3c2410/regs-spi.h include/asm-arm/plat-s3c24xx/regs-spi.h git mv include/asm-arm/arch-s3c2410/regs-udc.h include/asm-arm/plat-s3c24xx/regs-udc.h git mv include/asm-arm/arch-s3c2410/udc.h include/asm-arm/plat-s3c24xx/udc.h Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 7月, 2007 3 次提交
-
-
由 Ben Dooks 提交于
Remove the static maps for the LCD and USB devices. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
This patch moves items of the s3c24xx support into a new plat-s3c directory for items that use the s3c24xx support but are not directly s3c24xx compatible, such as the s3c2400 and s3c6400. git mv commands: git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 5月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
The S3C2412 has an reset-errata where the clock may cause a glitch switching back to EXTCLK. We force a switch to EXTCLK before writing the reset register to force use of the CLKCON sync logic to properly switch. Fix problem reported by Matthieu Castet. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 5月, 2007 1 次提交
-
-
由 Sandeep Sanjay Patil 提交于
Change the SPI Channel 1 register offset in s3c_spi1_resource[], and s3c2412_dma_mappings[]. Offset has to be 0x100 in s3c2412/13's case. Also, total SPI memory resource size changed to 0x24 for s3c2412/13. Signed-off-by: NSandeep Patil <psandeep.s@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 4月, 2007 3 次提交
-
-
由 Ben Dooks 提交于
Add Kconfig entry for SMDK2412 to go with the SMDK2413 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove the use of struct s3c24xx_board as this is just as easily done by using the platform device registration functions to make the initialisation sequence easier. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Lots of places in arch/arm were needlessly including linux/ptrace.h, resumably because we used to pass a struct pt_regs to interrupt handlers. Now that we don't, all these ptrace.h includes are redundant. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 2月, 2007 2 次提交
-
-
由 Ben Dooks 提交于
This patch gets the DMA system for the S3C24XX ready for the S3C2443, which requires 6 dma channels at a different stride, and different base IRQ. The DMA system is now initialised from the same drivers which apply the DMA mappings, as well as removing the DMA sysdev intialisation out of the main init code (which is now being called from a sysdev probe, so cannot add a new sysdev) Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Update the Kconfig of arch/arm/mach-s3c2443 to add the CONFIG_CPU_S3C2443 to the list of config variabls which mean CONFIG_CPU_S3C2412_ONLY cannot be set Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
Machines in the S3C24XX architectures should not be including <asm/hardware/iomd.h> as this is not needed. Also remove commented out includes Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
USB gadget pull-up control and device addition for the SMDK2413/SMDK2412 board. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
Our current support for the SMDK2413 is the same as the SMDK2412 (which is very similar), so add SMDK2412 to the list of machines that mach-smdk2413.c supports Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-