Add CAAM clock support to the i.MX6 clocking infrastructure.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The clocks and clock-names properties describe input clocks that may be
required for enablement of CAAM.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Avoid moving the head of the scatterlist entry by using temporary
pointers to walk the scatterlist.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This change fixes:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 456 at lib/dma-debug.c:1103 check_unmap+0x438/0x958()
caam_jr 2101000.jr0: DMA-API: device driver frees DMA memory with different size [device address=0x000000003a241080] [map ]
Modules linked in: tcrypt(+)
CPU: 0 PID: 456 Comm: insmod Not tainted 4.1.0-248766-gf823586-dirty #82
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<80015e0c>] (unwind_backtrace) from [<80012764>] (show_stack+0x10/0x14)
[<80012764>] (show_stack) from [<806df8e8>] (dump_stack+0x84/0xc4)
[<806df8e8>] (dump_stack) from [<800266fc>] (warn_slowpath_common+0x84/0xb4)
[<800266fc>] (warn_slowpath_common) from [<8002675c>] (warn_slowpath_fmt+0x30/0x40)
[<8002675c>] (warn_slowpath_fmt) from [<802c7db8>] (check_unmap+0x438/0x958)
[<802c7db8>] (check_unmap) from [<802c835c>] (debug_dma_unmap_page+0x84/0x8c)
[<802c835c>] (debug_dma_unmap_page) from [<804d3b94>] (ahash_update_ctx+0xb08/0xec4)
[<804d3b94>] (ahash_update_ctx) from [<7f002984>] (test_ahash_pnum.isra.9.constprop.19+0x2b8/0x514 [tcrypt])
[<7f002984>] (test_ahash_pnum.isra.9.constprop.19 [tcrypt]) from [<7f005998>] (do_test+0x2db8/0x37cc [tcrypt])
[<7f005998>] (do_test [tcrypt]) from [<7f00b050>] (tcrypt_mod_init+0x50/0x9c [tcrypt])
[<7f00b050>] (tcrypt_mod_init [tcrypt]) from [<80009730>] (do_one_initcall+0x8c/0x1d4)
[<80009730>] (do_one_initcall) from [<806dda4c>] (do_init_module+0x5c/0x1a8)
[<806dda4c>] (do_init_module) from [<80085308>] (load_module+0x17e0/0x1da0)
[<80085308>] (load_module) from [<80085998>] (SyS_init_module+0xd0/0x120)
[<80085998>] (SyS_init_module) from [<8000f4c0>] (ret_fast_syscall+0x0/0x3c)
---[ end trace 60807cfb6521c79f ]---
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since fields must be ORed in to operate correctly using any order of
operations, changed allocations of the combination of extended
descriptor structs + hardware scatterlists to use kzalloc() instead
of kmalloc(), so as to ensure that residue data would not be ORed in
with the correct data.
Signed-off-by: NSteve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ARM-based systems may disable clocking to the CAAM device on the
Freescale i.MX platform for power management purposes.  This patch
enables the required clocks when the CAAM module is initialized and
disables the required clocks when the CAAM module is shut down.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add set/clear 32-bit primitives for compatibility with ARM devices since
the primitives were previously only defined for the Power architecture.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Freescale i.MX6 ARM platforms do not support hardware cache coherency.
This patch adds cache coherency support to the CAAM driver.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to pull in the authencesn fix.

The ESP code has been updated to generate a completely linear
AD SG list.  This unfortunately broke authencesn which expects
the AD to be divided into at least three parts.

This patch fixes it to cope with the new format.  Later we will
fix it properly to accept arbitrary input and not rely on the
input being linear as part of the AEAD conversion.

Fixes: 7021b2e1 ("esp4: Switch to new AEAD interface")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses
null for copying.
Reported-by: NReported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that all implementations of authenc have been converted we can
reenable the tests.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts talitos to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts qat to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Tested-by: NTadeusz Struk <tadeusz.struk@intel.com>

This patch converts picoxcell to the new AEAD interface.  IV
generation has been removed since it's equivalent to a software
implementation.

As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory.  If an SG
list comes in that exceeds the limit, we will simply use the
fallback.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts ixp4xx to the new AEAD interface.  IV generation
has been removed since it's a purely software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the authenc implementations in caam to the
new AEAD interface.  The biggest change is that seqiv no longer
generates a random IV.  Instead the IPsec sequence number is used
as the IV.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts authenc to the new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch disables the authenc tests while the conversion to the
new IV calling convention takes place.  It also replaces the authenc
test vectors with ones that will work with the new IV convention.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to pull in the qat registration bug fix.

Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:

  crypto: talitos - enhanced talitos_desc struct for SEC1

The build error was:

  drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
  drivers/crypto/talitos.h:56: warning: missing braces around initializer
  drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
  drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
  drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
  drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
  drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
  make[2]: *** [drivers/crypto/talitos.o] Error 1
  make[1]: *** [drivers/crypto] Error 2
  make: *** [drivers] Error 2

This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AEAD API changes are now reflected in the crypto API doc book.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Trival change, fix spelling mistake 'aquire' -> 'acquire' in
dev_err message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The encap shared descriptor was changed to use the new IV convention.
In the process some commands were shifted, making the output length
zero, caam effectively writing garbage in dst.

While here, update the decap descriptor to execute the "write" commands
before the "read"s (as it previously was).
This makes sure the input fifo is drained before becoming full.

Fixes: 46218750 ("crypto: caam - Use new IV convention")
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change my IBM email to my personal IEEE email.

I'm leaving IBM, so my email there won't work anymore.  This changes
the owner to my personal email, so I can still get cc'ed on patches,
until someone at IBM sends a patch to take it over.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

One of the debug messages in the NX 842 PowerNV driver is missing
the required be32_to_cpu() wrapper when accessing the __be32 field
csb->count.  Add the wrapper so the message will show the correct count.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Return success instead of error if compression succeeds but the output is
larger than the input.

It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect.  Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There's no need to iterate through the list for instances in the
accel_table since the number of devices is already known in this file.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since the API for jent_panic() does not include format string parameters,
adjust the call to panic() to use a literal string to avoid any future
callers from leaking format strings into the panic message.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NAhsan Atta <ahsan.atta@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The subject macro mistakenly compares the passed-in ring size in bytes
with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB)
rather than comparing with the intended value of 4096.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The element pci_dev_id in the struct adf_hw_device_data is redundant since
the PCI device id can be retrieved from the struct pci_dev.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The kthread_run() function can return two different error values
but the hwrng core only checks for -ENOMEM. If the other error
value -EINTR is returned it is assigned to hwrng_fill and later
used on a kthread_stop() call which naturally crashes.

Cc: stable@vger.kernel.org
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers.  Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.

The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name.  This removes unneeded complexity.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The last commit merged nx-842.c's code into nx-842-crypto.c.  It
did not rename nx-842-crypto.c to nx-842.c, in order to let the
patch more clearly show what was merged.  This just renames
nx-842-crypto.c to nx-842.c, with no changes to its code.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge the nx-842.c code into nx-842-crypto.c.

This allows later patches to remove the 'platform' driver, and instead
allow each platform driver to directly register with the crypto
compression api.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace the duplicated finishing code (set destination buffer length and
set return code to 0) in the case of decompressing a buffer with no header
with a goto to the success case of decompressing a buffer with a header.

This is a trivial change that allows both success cases to use common code,
and includes the pr_debug() msg in both cases as well.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Don't register the pSeries driver when parsing the device tree returns
ENODEV.

The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned.  However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>