- 24 4月, 2008 6 次提交
-
-
由 Harshula Jayasuriya 提交于
In function svcauth_gss_accept() (net/sunrpc/auth_gss/svcauth_gss.c) the code that handles GSS integrity and decryption failures should be returning GARBAGE_ARGS as specified in RFC 2203, sections 5.3.3.4.2 and 5.3.3.4.3. Reviewed-by: NGreg Banks <gnb@sgi.com> Signed-off-by: NHarshula Jayasuriya <harshula@sgi.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
svc_recv() calls alloc_page(), and if it fails it does a 500ms uninterruptible sleep and then reattempts. There doesn't seem to be any real reason for this to be uninterruptible, so change it to an interruptible sleep. Also check for kthread_stop() and signalled() after setting the task state to avoid races that might lead to sleeping after kthread_stop() wakes up the task. I've done some very basic smoke testing with this, but obviously it's hard to test the actual changes since this all depends on an alloc_page() call failing. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
This field is set once and never used; probably some artifact of an earlier implementation idea. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Aurélien Charbon 提交于
This adds IPv6 support to the interfaces that are used to express nfsd exports. All addressed are stored internally as IPv6; backwards compatibility is maintained using mapped addresses. Thanks to Bruce Fields, Brian Haley, Neil Brown and Hideaki Joshifuji for comments Signed-off-by: NAurelien Charbon <aurelien.charbon@bull.net> Cc: Neil Brown <neilb@suse.de> Cc: Brian Haley <brian.haley@hp.com> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
When using kthreads that call into svc_recv, we want to make sure that they do not block there for a long time when we're trying to take down the kthread. This patch changes svc_recv() to check kthread_should_stop() at the same places that it checks to see if it's signalled(). Also check just before svc_recv() tries to schedule(). By making sure that we check it just after setting the task state we can avoid having to use any locking or signalling to ensure it doesn't block for a long time. There's still a chance of a 500ms sleep if alloc_page() fails, but that should be a rare occurrence and isn't a terribly long time in the context of a kthread being taken down. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
Needed since the plan is to not have a svc_create_thread helper and to have current users of that function just call kthread_run directly. Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 23 4月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
After the removal of the Solaris binary emulation the exports of move_addr_to_{kernel,user} are no longer used. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2008 8 次提交
-
-
由 Herbert Xu 提交于
As it stands it's impossible to use any authentication algorithms with an ID above 31 portably. It just happens to work on x86 but fails miserably on ppc64. The reason is that we're using a bit mask to check the algorithm ID but the mask is only 32 bits wide. After looking at how this is used in the field, I have concluded that in the long term we should phase out state matching by IDs because this is made superfluous by the reqid feature. For current applications, the best solution IMHO is to allow all algorithms when the bit masks are all ~0. The following patch does exactly that. This bug was identified by IBM when testing on the ppc64 platform using the NULL authentication algorithm which has an ID of 251. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
As you can see, there's no zero_it arg (in fact code always uses __GFP_ZERO). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
-
由 David S. Miller 提交于
As per Documentation/feature-removal-schedule.txt Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Hannemann 提交于
Make use of tcp before macro. Signed-off-by: NArnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The netns start-stop engine can happily live with any of init or exit callbacks set to NULL. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
What do_gettimeofday() does is to call getnstimeofday() and to convert the result from timespec{} to timeval{}. We do not always need timeval{} and we can convert timespec{} when we really need (to print). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The ip6_route_net_init() performs some unneeded actions. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The del_timer() function doesn't guarantee, that the timer callback is not active by the time it exits. Thus, the fib6_net_exit() may kfree() all the data, that is required by the fib6_run_gc(). The race window is tiny, but slab poisoning can trigger this bug. Using del_timer_sync() will cure this. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2008 6 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
What do_gettimeofday() does is to call getnstimeofday() and to convert the result from timespec{} to timeval{}. After that, these callers convert the result again to msec. Use getnstimeofday() and convert the units at once. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global icmp_sk_init() static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global struct ip6_prohibit_entry_template static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satoru SATOH 提交于
This is a trivial fix to correct function name in a comment in net/ipv4/tcp.c. Signed-off-by: NSatoru SATOH <satoru.satoh@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
Expose dev_id to userspace, because it helps to disambiguate between interfaces where the MAC address is unique. This should allow us to simplify the handling of persistent naming for S390 network devices in udev -- because it can depend on a simple attribute of the device like the other match criteria, rather than having a special case for SUBSYSTEMS=="ccwgroup". Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bernard Pidoux 提交于
[ INFO: possible recursive locking detected ] 2.6.25 #3 --------------------------------------------- ax25ipd/3811 is trying to acquire lock: (rose_node_list_lock){-+..}, at: [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 [rose] but task is already holding lock: (rose_node_list_lock){-+..}, at: [<f8d31fed>] rose_route_frame+0x4d/0x620 [rose] other info that might help us debug this: 6 locks held by ax25ipd/3811: #0: (&tty->atomic_write_lock){--..}, at: [<c0259a1c>] tty_write_lock+0x1c/0x50 #1: (rcu_read_lock){..--}, at: [<c02aea36>] net_rx_action+0x96/0x230 #2: (rcu_read_lock){..--}, at: [<c02ac5c0>] netif_receive_skb+0x100/0x2f0 #3: (rose_node_list_lock){-+..}, at: [<f8d31fed>] rose_route_frame+0x4d/0x620 [rose] #4: (rose_neigh_list_lock){-+..}, at: [<f8d31ff7>] rose_route_frame+0x57/0x620 [rose] #5: (rose_route_list_lock){-+..}, at: [<f8d32001>] rose_route_frame+0x61/0x620 [rose] stack backtrace: Pid: 3811, comm: ax25ipd Not tainted 2.6.25 #3 [<c0147e27>] print_deadlock_bug+0xc7/0xd0 [<c0147eca>] check_deadlock+0x9a/0xb0 [<c0149cd2>] validate_chain+0x1e2/0x310 [<c0149b95>] ? validate_chain+0xa5/0x310 [<c010a7d8>] ? native_sched_clock+0x88/0xc0 [<c0149fa1>] __lock_acquire+0x1a1/0x750 [<c014a5d1>] lock_acquire+0x81/0xa0 [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose] [<c03201a3>] _spin_lock_bh+0x33/0x60 [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose] [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 [rose] [<f8d32404>] rose_route_frame+0x464/0x620 [rose] [<c031ffdd>] ? _read_unlock+0x1d/0x20 [<f8d31fa0>] ? rose_route_frame+0x0/0x620 [rose] [<f8d1c396>] ax25_rx_iframe+0x66/0x3b0 [ax25] [<f8d1f42f>] ? ax25_start_t3timer+0x1f/0x40 [ax25] [<f8d1e65b>] ax25_std_frame_in+0x7fb/0x890 [ax25] [<c0320005>] ? _spin_unlock_bh+0x25/0x30 [<f8d1bdf6>] ax25_kiss_rcv+0x2c6/0x800 [ax25] [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c014a8a7>] ? __lock_release+0x47/0x70 [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c031ffdd>] ? _read_unlock+0x1d/0x20 [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c02a4d3a>] ? sock_queue_rcv_skb+0x13a/0x1d0 [<c02a4c45>] ? sock_queue_rcv_skb+0x45/0x1d0 [<f8d1bb30>] ? ax25_kiss_rcv+0x0/0x800 [ax25] [<c02ac715>] netif_receive_skb+0x255/0x2f0 [<c02ac5c0>] ? netif_receive_skb+0x100/0x2f0 [<c02af05c>] process_backlog+0x7c/0xf0 [<c02aeb0c>] net_rx_action+0x16c/0x230 [<c02aea36>] ? net_rx_action+0x96/0x230 [<c012bd53>] __do_softirq+0x93/0x120 [<f8d2a68a>] ? mkiss_receive_buf+0x33a/0x3f0 [mkiss] [<c012be37>] do_softirq+0x57/0x60 [<c012c265>] local_bh_enable_ip+0xa5/0xe0 [<c0320005>] _spin_unlock_bh+0x25/0x30 [<f8d2a68a>] mkiss_receive_buf+0x33a/0x3f0 [mkiss] [<c025ea37>] pty_write+0x47/0x60 [<c025c620>] write_chan+0x1b0/0x220 [<c0259a1c>] ? tty_write_lock+0x1c/0x50 [<c011fec0>] ? default_wake_function+0x0/0x10 [<c0259bea>] tty_write+0x12a/0x1c0 [<c025c470>] ? write_chan+0x0/0x220 [<c018bbc6>] vfs_write+0x96/0x130 [<c0259ac0>] ? tty_write+0x0/0x1c0 [<c018c24d>] sys_write+0x3d/0x70 [<c0104d1e>] sysenter_past_esp+0x5f/0xa5 ======================= BUG: soft lockup - CPU#0 stuck for 61s! [ax25ipd:3811] Pid: 3811, comm: ax25ipd Not tainted (2.6.25 #3) EIP: 0060:[<c010a9db>] EFLAGS: 00000246 CPU: 0 EIP is at native_read_tsc+0xb/0x20 EAX: b404aa2c EBX: b404a9c9 ECX: 017f1000 EDX: 0000076b ESI: 00000001 EDI: 00000000 EBP: ecc83afc ESP: ecc83afc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7f5f000 CR3: 2cd8e000 CR4: 000006f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c0204937>] delay_tsc+0x17/0x30 [<c02048e9>] __delay+0x9/0x10 [<c02127f6>] __spin_lock_debug+0x76/0xf0 [<c0212618>] ? spin_bug+0x18/0x100 [<c0147923>] ? __lock_contended+0xa3/0x110 [<c0212998>] _raw_spin_lock+0x68/0x90 [<c03201bf>] _spin_lock_bh+0x4f/0x60 [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose] [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 [rose] [<f8d32404>] rose_route_frame+0x464/0x620 [rose] [<c031ffdd>] ? _read_unlock+0x1d/0x20 [<f8d31fa0>] ? rose_route_frame+0x0/0x620 [rose] [<f8d1c396>] ax25_rx_iframe+0x66/0x3b0 [ax25] [<f8d1f42f>] ? ax25_start_t3timer+0x1f/0x40 [ax25] [<f8d1e65b>] ax25_std_frame_in+0x7fb/0x890 [ax25] [<c0320005>] ? _spin_unlock_bh+0x25/0x30 [<f8d1bdf6>] ax25_kiss_rcv+0x2c6/0x800 [ax25] [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c014a8a7>] ? __lock_release+0x47/0x70 [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c031ffdd>] ? _read_unlock+0x1d/0x20 [<c02a4769>] ? sock_def_readable+0x59/0x80 [<c02a4d3a>] ? sock_queue_rcv_skb+0x13a/0x1d0 [<c02a4c45>] ? sock_queue_rcv_skb+0x45/0x1d0 [<f8d1bb30>] ? ax25_kiss_rcv+0x0/0x800 [ax25] [<c02ac715>] netif_receive_skb+0x255/0x2f0 [<c02ac5c0>] ? netif_receive_skb+0x100/0x2f0 [<c02af05c>] process_backlog+0x7c/0xf0 [<c02aeb0c>] net_rx_action+0x16c/0x230 [<c02aea36>] ? net_rx_action+0x96/0x230 [<c012bd53>] __do_softirq+0x93/0x120 [<f8d2a68a>] ? mkiss_receive_buf+0x33a/0x3f0 [mkiss] [<c012be37>] do_softirq+0x57/0x60 [<c012c265>] local_bh_enable_ip+0xa5/0xe0 [<c0320005>] _spin_unlock_bh+0x25/0x30 [<f8d2a68a>] mkiss_receive_buf+0x33a/0x3f0 [mkiss] [<c025ea37>] pty_write+0x47/0x60 [<c025c620>] write_chan+0x1b0/0x220 [<c0259a1c>] ? tty_write_lock+0x1c/0x50 [<c011fec0>] ? default_wake_function+0x0/0x10 [<c0259bea>] tty_write+0x12a/0x1c0 [<c025c470>] ? write_chan+0x0/0x220 [<c018bbc6>] vfs_write+0x96/0x130 [<c0259ac0>] ? tty_write+0x0/0x1c0 [<c018c24d>] sys_write+0x3d/0x70 [<c0104d1e>] sysenter_past_esp+0x5f/0xa5 ======================= Since rose_route_frame() does not use rose_node_list we can safely remove rose_node_list_lock spin lock here and let it be free for rose_get_neigh(). Signed-off-by: NBernard Pidoux <f6bvp@amsat.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2008 4 次提交
-
-
由 Bernard Pidoux 提交于
================================================ [ BUG: lock held when returning to user space! ] ------------------------------------------------ xfbbd/3683 is leaving the kernel with locks still held! 1 lock held by xfbbd/3683: #0: (sk_lock-AF_ROSE){--..}, at: [<c8cd1eb3>] rose_connect+0x73/0x420 [rose] INFO: task xfbbd:3683 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. xfbbd D 00000246 0 3683 3669 c6965ee0 00000092 c02c5c40 00000246 c0f6b5f0 c0f6b5c0 c0f6b5f0 c0f6b5c0 c0f6b614 c6965f18 c024b74b ffffffff c06ba070 00000000 00000000 00000001 c6ab07c0 c012d450 c0f6b634 c0f6b634 c7b5bf10 c0d6004c c7b5bf10 c6965f40 Call Trace: [<c024b74b>] lock_sock_nested+0x6b/0xd0 [<c012d450>] ? autoremove_wake_function+0x0/0x40 [<c02488f1>] sock_fasync+0x41/0x150 [<c0249e69>] sock_close+0x19/0x40 [<c0175d54>] __fput+0xb4/0x170 [<c0176018>] fput+0x18/0x20 [<c017300e>] filp_close+0x3e/0x70 [<c01744e9>] sys_close+0x69/0xb0 [<c0103bda>] sysenter_past_esp+0x5f/0xa5 ======================= INFO: lockdep is turned off. Signed-off-by: NBernard Pidoux <f6bvp@amsat.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Reported by Ingo Molnar. The SIP helper is also useful without NAT. This patch adds an ifdef around the RTP call optimization for NATed clients. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
We need to select LIBCRC32C. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Travis 提交于
* Use new node_to_cpumask_ptr. This creates a pointer to the cpumask for a given node. This definition is in mm patch: asm-generic-add-node_to_cpumask_ptr-macro.patch * Use new set_cpus_allowed_ptr function. Depends on: [mm-patch]: asm-generic-add-node_to_cpumask_ptr-macro.patch [sched-devel]: sched: add new set_cpus_allowed_ptr function [x86/latest]: x86: add cpus_scnprintf function Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Greg Banks <gnb@melbourne.sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 4月, 2008 4 次提交
-
-
由 Dave Hansen 提交于
This takes care of all of the direct callers of vfs_mknod(). Since a few of these cases also handle normal file creation as well, this also covers some calls to vfs_create(). So that we don't have to make three mnt_want/drop_write() calls inside of the switch statement, we move some of its logic outside of the switch and into a helper function suggested by Christoph. This also encapsulates a fix for mknod(S_IFREG) that Miklos found. [AV: merged mkdir handling, added missing nfsd pieces] Acked-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Matthew Wilcox 提交于
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Ahmed S. Darwish 提交于
Don't use SELinux exported selinux_get_task_sid symbol. Use the generic LSM equivalent instead. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NPaul Moore <paul.moore@hp.com>
-
由 Alexey Dobriyan 提交于
This patch effectively reverts commit d0498d9a aka "[NET]: Do not allocate unneeded memory for dev->priv alignment." It was found to be buggy because of final unconditional += NETDEV_ALIGN_CONST removal. For example, for sizeof(struct net_device) being 2048 bytes, "alloc_size" was also 2048 bytes, but allocator with debugging options turned on started giving out !32-byte aligned memory resulting in redzones overwrites. Patch does small optimization in ->priv'less case: bumping size to next 32-byte boundary was always done to ensure ->priv will also be aligned. But, no ->priv, no need to do that. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2008 6 次提交
-
-
由 David S. Miller 提交于
Fixes bugzilla #8895 If a super-tree leaf has 'rt' assigned to it and we get an error from fib6_add_rt2node(), we'll leave a reference to 'rt' in pn->leaf and then do an unconditional dst_free(). We should prune such references. Based upon a report by Vincent Perrier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
dev_get_by_index() may return NULL if nothing is found. In net/netlabel/netlabel_unlabeled.c::netlbl_unlabel_staticlist_gen() the function is called, but the return value is never checked. If it returns NULL then we'll deref a NULL pointer on the very next line. I checked the callers, and I don't think this can actually happen today, but code changes over time and in the future it might happen and it does no harm to be defensive and check for the failure, so that if/when it happens we'll fail gracefully instead of crashing. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
datalen is unsigned so it can never be less than zero, but that's ok because the attribute passed to nla_len() has been validated and therefore a negative return value is impossible. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This deblats ~200 bytes when ipv6 and dccp are 'y'. Besides, this will ease compilation issues for patches I'm working on to make inet hash tables more scalable wrt net namespaces. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
As I can see from the code, two places (tcp_v6_syn_recv_sock and dccp_v6_request_recv_sock) that call this one already run with BHs disabled, so it's safe to call __inet_inherit_port there. Besides (in case I missed smth with code review) the calltrace tcp_v6_syn_recv_sock `- tcp_v4_syn_recv_sock `- __inet_inherit_port and the similar for DCCP are valid, but assumes BHs to be disabled. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gui Jianfeng 提交于
According to RFC4960 7.2.2, When all of the data transmitted by the sender has been acknowledged by the recerver, partial_bytes_acked is initialized to 0. This patch conforms to rfc requirement. Without this fix, cwnd might be error incremented. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2008 5 次提交
-
-
由 Roland Dreier 提交于
Add a new IB_WR_SEND_WITH_INV send opcode that can be used to mark a "send with invalidate" work request as defined in the iWARP verbs and the InfiniBand base memory management extensions. Also put "imm_data" and a new "invalidate_rkey" member in a new "ex" union in struct ib_send_wr. The invalidate_rkey member can be used to pass in an R_Key/STag to be invalidated. Add this new union to struct ib_uverbs_send_wr. Add code to copy the invalidate_rkey field in ib_uverbs_post_send(). Fix up low-level drivers to deal with the change to struct ib_send_wr, and just remove the imm_data initialization from net/sunrpc/xprtrdma/, since that code never does any send with immediate operations. Also, move the existing IB_DEVICE_SEND_W_INV flag to a new bit, since the iWARP drivers currently in the tree set the bit. The amso1100 driver at least will silently fail to honor the IB_SEND_INVALIDATE bit if passed in as part of userspace send requests (since it does not implement kernel bypass work request queueing). Remove the flag from all existing drivers that set it until we know which ones are OK. The values chosen for the new flag is not consecutive to avoid clashing with flags defined in the XRC patches, which are not merged yet but which are already in use and are likely to be merged soon. This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Allan Stephens 提交于
This patch is a largely cosmetic cleanup of the TIPC reference table code. - The object reference field in each table entry is now single 32-bit integer instead of a union of two 32-bit integers. - Variable naming has been made more consistent. - Error message output has been made more consistent. - Useless #includes have been eliminated. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch modifies TIPC's reference table code to delay initializing table entries until they are actually needed by applications. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch converts the TIPC reference table locking routines into non-inlined routines, since they are mainly called from non-performance critical areas of TIPC and the added code footprint incurred through inlining can no longer be justified. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch reworks the scanning code (ieee80211_rx_bss_info) to take more parameters from beacons and keep a BSS info structure alive when only beacons for it are received. This fixes a problem with iwlwifi drivers (where we don't understand the root cause of the problem yet) and another driver for some broken hardware (which cannot send probe requests unless associated, so can't always actively scan.) Signed-off-by: NBill Moss <bmoss@clemson.edu> [jmberg: reformatted comments, make probe_resp a bool] Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-