Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 14 6月, 2012 4 次提交
  3. 12 6月, 2012 1 次提交
  5. 06 6月, 2012 4 次提交
    • A
      Merge branch 'for-upstream' of git://github.com/agraf/linux-2.6 into next · 25e531a9
      由 Avi Kivity 提交于 
      Alex says:

"Changes this time include:

  - Generalize KVM_GUEST support to overall ePAPR code
  - Fix reset for Book3S HV
  - Fix machine check deferral when CONFIG_KVM_GUEST=y
  - Add support for BookE register DECAR"

* 'for-upstream' of git://github.com/agraf/linux-2.6:
  KVM: PPC: Not optimizing MSR_CE and MSR_ME with paravirt.
  KVM: PPC: booke: Added DECAR support
  KVM: PPC: Book3S HV: Make the guest hash table size configurable
  KVM: PPC: Factor out guest epapr initialization
Signed-off-by: NAvi Kivity <avi@redhat.com>
      25e531a9
    • M
      KVM: disable uninitialized var warning · 79f702a6
      由 Michael S. Tsirkin 提交于 
      I see this in 3.5-rc1:

arch/x86/kvm/mmu.c: In function ‘kvm_test_age_rmapp’:
arch/x86/kvm/mmu.c:1271: warning: ‘iter.desc’ may be used uninitialized in this function

The line in question was introduced by commit
1e3f42f0

 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
                              unsigned long data)
 {
-       u64 *spte;
+       u64 *sptep;
+       struct rmap_iterator iter;   <- line 1271
        int young = 0;

        /*

The reason I think is that the compiler assumes that
the rmap value could be 0, so

static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator
*iter)
{
        if (!rmap)
                return NULL;

        if (!(rmap & 1)) {
                iter->desc = NULL;
                return (u64 *)rmap;
        }

        iter->desc = (struct pte_list_desc *)(rmap & ~1ul);
        iter->pos = 0;
        return iter->desc->sptes[iter->pos];
}

will not initialize iter.desc, but the compiler isn't
smart enough to see that

        for (sptep = rmap_get_first(*rmapp, &iter); sptep;
             sptep = rmap_get_next(&iter)) {

will immediately exit in this case.
I checked by adding
        if (!*rmapp)
                goto out;
on top which is clearly equivalent but disables the warning.

This patch uses uninitialized_var to disable the warning without
increasing code size.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      79f702a6
    • C
      KVM: Cleanup the kvm_print functions and introduce pr_XX wrappers · a737f256
      由 Christoffer Dall 提交于 
      Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.

Functions introduced or modified are:
 - kvm_err(fmt, ...)
 - kvm_info(fmt, ...)
 - kvm_debug(fmt, ...)
 - kvm_pr_unimpl(fmt, ...)
 - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      a737f256
    • C
      KVM: s390: Change maintainer · 4ae57b6c
      由 Christian Borntraeger 提交于 
      Since Carsten is now working on a different project, Cornelia will
work as the 2nd s390/kvm maintainer.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Carsten Otte <cotte@de.ibm.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      4ae57b6c
  7. 05 6月, 2012 17 次提交
  9. 04 6月, 2012 5 次提交
  11. 03 6月, 2012 9 次提交
    • L
      Linux 3.5-rc1 · f8f5701b
      由 Linus Torvalds 提交于
      f8f5701b
    • L
      Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm · 912afc36
      由 Linus Torvalds 提交于 
      Pull device-mapper updates from Alasdair G Kergon:
 "Improve multipath's retrying mechanism in some defined circumstances
  and provide a simple reserve/release mechanism for userspace tools to
  access thin provisioning metadata while the pool is in use."

* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm thin: provide userspace access to pool metadata
  dm thin: use slab mempools
  dm mpath: allow ioctls to trigger pg init
  dm mpath: delay retry of bypassed pg
  dm mpath: reduce size of struct multipath
      912afc36
    • J
      dm thin: provide userspace access to pool metadata · cc8394d8
      由 Joe Thornber 提交于 
      This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      cc8394d8
    • M
      dm thin: use slab mempools · a24c2569
      由 Mike Snitzer 提交于 
      Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      a24c2569
    • M
      dm mpath: allow ioctls to trigger pg init · 35991652
      由 Mikulas Patocka 提交于 
      After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device.  Until this has happened, ioctls return -EAGAIN.

With this patch, new paths are made available in response to an ioctl
too.  The processing of the ioctl gets delayed until this has happened.

Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.

Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure.  Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands).  For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too.  It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      35991652
    • M
      dm mpath: delay retry of bypassed pg · f220fd4e
      由 Mike Christie 提交于 
      If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.

If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      f220fd4e
    • M
      dm mpath: reduce size of struct multipath · 1fbdd2b3
      由 Mike Snitzer 提交于 
      Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes.  Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes).  This allows future flags to be added
without each consuming an unsigned int.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      1fbdd2b3
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fc3acf2
      由 Linus Torvalds 提交于 
      Pull networking updates from David Miller:

 1) Make syn floods consume significantly less resources by

    a) Not pre-COW'ing routing metrics for SYN/ACKs
    b) Mirroring the device queue mapping of the SYN for the SYN/ACK
       reply.

    Both from Eric Dumazet.

 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.

 3) Validate the length requested when building a paged SKB for a
    socket, so we don't overrun the page vector accidently.  From Jason
    Wang.

 4) When netlabel is disabled, we abort all IP option processing when we
    see a CIPSO option.  This isn't the right thing to do, we should
    simply skip over it and continue processing the remaining options
    (if any).  Fix from Paul Moore.

 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
    Apfelbaum.

 6) 8139cp enables the receiver before the ring address is properly
    programmed, which potentially lets the device crap over random
    memory.  Fix from Jason Wang.

 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
    address reference in jumbo RX frame processing from Bruce Allan and
    Sebastian Andrzej Siewior, respectively.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fec_mpc52xx: fix timestamp filtering
  mcs7830: Implement link state detection
  e1000e: fix Rapid Start Technology support for i217
  e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
  r8169: call netif_napi_del at errpaths and at driver unload
  tcp: reflect SYN queue_mapping into SYNACK packets
  tcp: do not create inetpeer on SYNACK message
  8139cp/8139too: terminate the eeprom access with the right opmode
  8139cp: set ring address before enabling receiver
  cipso: handle CIPSO options correctly when NetLabel is disabled
  net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
  bql: Avoid possible inconsistent calculation.
  bql: Avoid unneeded limit decrement.
  bql: Fix POSDIFF() to integer overflow aware.
  net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
  net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
  net/mlx4_core: Fixes for VF / Guest startup flow
  net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
  net/mlx4_core: Fix number of EQs used in ICM initialisation
  net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
      4fc3acf2
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 63004afa
      由 Linus Torvalds 提交于 
      Pull straggler x86 fixes from Peter Anvin:
 "Three groups of patches:

  - EFI boot stub documentation and the ability to print error messages;
  - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
    should never have been ported, and the port is broken and
    potentially dangerous.)
  - ftrace stack corruption fixes.  I'm not super-happy about the
    technical implementation, but it is probably the least invasive in
    the short term.  In the future I would like a single method for
    nesting the debug stack, however."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
  x86, efi: Add EFI boot stub documentation
  x86, efi; Add EFI boot stub console support
  x86, efi: Only close open files in error path
  ftrace/x86: Do not change stacks in DEBUG when calling lockdep
  x86: Allow nesting of the debug stack IDT setting
  x86: Reset the debug_stack update counter
  ftrace: Use breakpoint method to update ftrace caller
  ftrace: Synchronize variable setting with breakpoints
      63004afa