Channel context driver operations can sleep, so add might_sleep()
and document this.
Signed-off-by: NChaitanya T K <chaitanya.mgit@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Allow distinguishing the non-station case from the case of a
station without rates, by using -1 for the non-station case.
This value cannot be reached with a station since that many
legacy rates don't exist.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

As WMM is required for HT/VHT operation, treat bad WMM parameters
more gracefully by falling back to default parameters instead of
not using WMM assocation. This makes it possible to still use HT
or VHT, although potentially with reduced quality of service due
to unintended WMM parameters.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Disabling WMM has a huge impact these days. It implies that
HT and VHT will be disabled which means that the throughput
will be drammatically reduced.
Since the AIFSN is a transmission parameter, we can play a
bit and fix it up to make it compliant with the 802.11
specification which requires it to be at least 2.
Increasing it from 1 to 2 will slightly reduce the
likelyhood to get a transmission opportunity compared to
other clients that would accept to set AIFSN=1, but at
least it will allow HT and VHT which is a huge gain.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function currently determines this value, for use in bss_info.qos,
based on the interface type itself. Make it a parameter instead and
set it with the same logic for now.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The previous patch changed mac80211 to always report an event
after a CQM RSSI reconfiguration. Document that as expected
behaviour in both the cfg80211 and mac80211 API.

Currently, iwlmvm already implements that behaviour; the other
drivers implementing CQM RSSI events may have to be changed.

This behaviour lets userspace know what the current state is
without relying on querying the data which is racy.
Reviewed-by: NSharon, Sara <sara.sharon@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

llid_in_use needs to be limited to stations of the same VIF, otherwise it
will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
sta->mesh set.

Steps to reproduce:

   modprobe mac80211_hwsim channels=2
   iw phy phy0 interface add ibss0 type ibss
   iw phy phy0 interface add mesh0 type mp
   iw phy phy1 interface add ibss1 type ibss
   iw phy phy1 interface add mesh1 type mp
   ip link set ibss0 up
   ip link set mesh0 up
   ip link set ibss1 up
   ip link set mesh1 up
   iw dev ibss0 ibss join foo 2412
   iw dev ibss1 ibss join foo 2412
   # Ensure that ibss0 and ibss1 are actually associated; I often need to
   # leave and join the cell on ibss1 a second time.
   iw dev mesh0 mesh join bar
   iw dev mesh1 mesh join bar # crash
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When 11n peers performs a TDLS connection on a legacy BSS, the HT
operation IE must be specified according to IEEE802.11-2012 section
9.23.3.2. Otherwise HT-protection is compromised and the medium becomes
noisy for both the TDLS and the BSS links.
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Scheduled scan has to be reconfigured only if wowlan wasn't
configured, since otherwise it should continue to run (with
the 'any' trigger) or be aborted.

The current code will end up asking the driver to start a new
scheduled scan without stopping the previous one, and leaking
some memory (from the previous request.)

Fix this by doing the abort/restart under the proper conditions.
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If drv_start() fails during hw_restart, all the running
interfaces are being closed/stopped, which results in
drv_stop() being called, although the driver was never
started successfully.

This might cause drivers to perform operations on uninitialized
memory (as they assume it was initialized on drv_start)

Consider the local->started flag, and call the driver's stop()
op only if drv_start() succeeded before.

Move drv_start() and drv_stop() to driver-ops.c, as they are no
longer simple wrappers.
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The recalc_smps work can run after the station disassociates.
At this stage we already released the channel, but the work
will be cancelled only when the interface stops.
In this scenario we can hit the warning in ieee80211_recalc_smps, so
just remove it.
Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Requesting hw restart during suspend might result
in the restart work being executed after mac80211
and the hw are suspended.

Solve the race by simply scheduling the restart
work on a freezable workqueue.

Note that there can be some cases of reconfiguration
on resume (besides the hardware restart):

* wowlan is not configured -
    All the interfaces removed were removed on suspend,
    and drv_stop() was called. At this point the driver
    shouldn't expect for hw_restart anyway, so we can
    simply cancel it (on resume).

* wowlan is configured, drv_resume() == 1
    There is no definitive expected behavior in this case,
    as each driver might have different expectations (e.g.
    setting some flags on suspend/restart vs. not handling
    spurious recovery).
    For now, simply let the hw_restart work run again after
    resume, and hope the driver will handle it well (or at
    least initiate another hw restart).
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Local request to deauthenticate wasn't handled while associating, thus
the association could continue even when the user space required to
disconnect.

Cc: stable@vger.kernel.org
Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In TDLS channel-switch operations the chandef can sometimes be NULL.
Avoid an oops in the trace code for these cases and just print a
chandef full of zeros.

Cc: stable@vger.kernel.org
Fixes: a7a6bdd0 ("mac80211: introduce TDLS channel switch ops")
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If parse_acl_data succeeds but the subsequent parsing of smps
attributes fails, there will be a memory leak due to early returns.
Fix that by moving the ACL parsing later.

Cc: stable@vger.kernel.org
Fixes: 18998c38 ("cfg80211: allow requesting SMPS mode on ap start")
Signed-off-by: NOla Olsson <ola.olsson@sonymobile.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In case of one shot NOA the interval can be 0, catch that
instead of potentially (depending on the driver) crashing
like this:

divide error: 0000 [#1] SMP
[...]
Call Trace:
<IRQ>
[<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211]
[<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211]
[<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k]
[<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw]
[<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k]
[<ffffffff8107ad65>] tasklet_action+0xe5/0xf0
[...]

Cc: stable@vger.kernel.org [3.16+, due to d463af4a using it]
Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Here's another set of patches for the current cycle:
 * I merged net-next back to avoid a conflict with the
 * cfg80211 scheduled scan API extensions
 * preparations for better scan result timestamping
 * regulatory cleanups
 * mac80211 statistics cleanups
 * a few other small cleanups and fixes
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the global Soc configuration is treated by syscon, and sub ctrl bus is
Soc bus. it has to be treated by syscon.
Signed-off-by: Nyankejian <yankejian@huawei.com>
Signed-off-by: Nlisheng <lisheng011@huawei.com>
Signed-off-by: Nlipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Trivial fixes for cxgb4 driver

This patch series updates driver description for next gen. adapters, updates
firmware info., returns error for setup_rss error case, restores L1
configuration in case of FW rejects new config, updates and aligns ethtool
get stats settings, etc

 This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update ethtool get_drvinfo to display regdump len and also update
firmware string version print to display N/A in case FW isn't present
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the ethtool set_settings() routine we need to remember our old L1
Configuration in case the firmware rejects the request and then restore
that.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For {1, 10, 40} Gb/s. Prohibiting turning off autonegotiation isn't anywhere
in the standard.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Align the ethtool get stats settings with the rest so it looks uniform
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With use of lwtunnel, we can directly call dev_queue_xmit()
rather than calling netdev vport send operation.
Following change make tunnel vport code bit cleaner.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch fixes following sparse warning.
net/openvswitch/flow_netlink.c:583:30: warning: incorrect type in assignment (different base types)
net/openvswitch/flow_netlink.c:583:30:    expected restricted __be16 [usertype] ipv4
net/openvswitch/flow_netlink.c:583:30:    got int

Fixes: 6b26ba3a ("openvswitch: netlink attributes for IPv6 tunneling")
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf_perf_event_output helper

Over the last year there were multiple attempts to let eBPF programs
output data into perf events by He Kuang and Wangnan.
The last one was:
https://lkml.org/lkml/2015/7/20/736
It was almost perfect with exception that all bpf programs would sent
data into one global perf_event.
This patch set takes different approach by letting user space
open independent PERF_COUNT_SW_BPF_OUTPUT events, so that program
output won't collide.

Wangnan is working on corresponding perf patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Performance test and example of bpf_perf_event_output().
kprobe is attached to sys_write() and trivial bpf program streams
pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event.

Usage:
$ sudo ./bld_x64/samples/bpf/trace_output
recv 2968913 events per sec
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This helper is used to send raw data from eBPF program into
special PERF_TYPE_SOFTWARE/PERF_COUNT_SW_BPF_OUTPUT perf_event.
User space needs to perf_event_open() it (either for one or all cpus) and
store FD into perf_event_array (similar to bpf_perf_event_read() helper)
before eBPF program can send data into it.

Today the programs triggered by kprobe collect the data and either store
it into the maps or print it via bpf_trace_printk() where latter is the debug
facility and not suitable to stream the data. This new helper replaces
such bpf_trace_printk() usage and allows programs to have dedicated
channel into user space for post-processing of the raw data collected.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of WARN_ON in perf_event_output() on unpaded raw samples,
pad them automatically.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the ipv4 outbound path of an ipvlan device in l3 mode, the ifindex is
being grabbed from dev_get_iflink. This works for the physical device
case, since as the documentation of that function notes: "Physical
interfaces have the same 'ifindex' and 'iflink' values.".  However, if
the master device is a veth, and the pairs are in separate net
namespaces, the route lookup will fail with -ENODEV due to outer veth
pair being in a separate namespace from the ipvlan master/routing
namespace.

  ns0    |   ns1    |   ns2
 veth0a--|--veth0b--|--ipvl0

In ipvlan_process_v4_outbound(), a packet sent from ipvl0 in the above
configuration will pass fl.flowi4_oif == veth0a to
ip_route_output_flow(), but *net == ns1.

Notice also that ipv6 processing is not using iflink. Since there is a
discrepancy in usage, fixup both v4 and v6 case to use local dev
variable.

Tested this with l3 ipvlan on top of veth, as well as with single
physical interface in the top namespace.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Reviewed-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allowing an application to set whatever limit for
the list of recently RST fastopen sessions [1] is not wise,
as it open ways to deplete kernel memory.

Cap the user provided limit by somaxconn sysctl,
like listen() backlog.

[1] https://tools.ietf.org/html/rfc7413#section-5.1Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This header file only contains the platform data structure definition,
so move it to the include/linux/platform_data/ directory.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the inclusion of linux/mdio-gpio.h in nas4220b, wbd111 and wbd222
boards since mdio-gpio is not used.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns/hnae.c:442:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert added SIT support to GRO with commit
19424e05 ("sit: Add gro callbacks to sit_offload"),
later reverted by Herbert Xu.

The problem came because Tom patch was building GRO
packets without proper meta data : If packets were locally
delivered, we would not care.

But if packets needed to be forwarded, GSO engine was not
able to segment individual segments.

With the following patch, we correctly set skb->encapsulation
and inner network header. We also update gso_type.

Tested:

Server :
netserver
modprobe dummy
ifconfig dummy0 8.0.0.1 netmask 255.255.255.0 up
arp -s 8.0.0.100 4e:32:51:04:47:e5
iptables -I INPUT -s 10.246.7.151 -j TEE --gateway 8.0.0.100
ifconfig sixtofour0
sixtofour0 Link encap:IPv6-in-IPv4
          inet6 addr: 2002:af6:798::1/128 Scope:Global
          inet6 addr: 2002:af6:798::/128 Scope:Global
          UP RUNNING NOARP  MTU:1480  Metric:1
          RX packets:411169 errors:0 dropped:0 overruns:0 frame:0
          TX packets:409414 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:20319631739 (20.3 GB)  TX bytes:29529556 (29.5 MB)

Client :
netperf -H 2002:af6:798::1 -l 1000 &

Checked on server traffic copied on dummy0 and verify segments were
properly rebuilt, with proper IP headers, TCP checksums...

tcpdump on eth0 shows proper GRO aggregation takes place.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing my SIT/GRO patch using netfilter TEE module and a dummy
device, I found some features were missing :

TSO IPv6, UFO, and encapsulated traffic.

ethtool -k dummy0 now gives :
...
tcp-segmentation-offload: on
	tx-tcp-segmentation: on
	tx-tcp-ecn-segmentation: on
	tx-tcp6-segmentation: on
udp-fragmentation-offload: on
...
tx-gre-segmentation: on
tx-ipip-segmentation: on
tx-sit-segmentation: on
tx-udp_tnl-segmentation: on
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>