Found while analysing a perf.data file collected on an ARM
machine where an explicitely specified vmlinux was being
disregarded.
Reported-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263904574-30732-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because it may be possible that there was no buildid section,
where we would set this to 1.

Found while analysing a perf.data file collected on an ARM
machine where an explicitely specified vmlinux was being
disregarded.
Reported-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263904574-30732-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix these warning:

acme@parisc:~/git/linux-2.6-tip$ make -C tools/perf/ install
make: Entering directory
`/home/acme/git/linux-2.6-tip/tools/perf' Makefile:833: warning:
overriding commands for target `perf-archive' Makefile:822:
warning: ignoring old commands for target `perf-archive'
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263846102-24841-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This also makes it appear on the 'perf --help' output, i.e.
util/generate-cmdlist.sh now takes it into account.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263837559-24168-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Latest kprobetrace can remove probe points selectively, thus
the documentation should be updated too.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100119023512.31880.35535.stgit@localhost6.localdomain6>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Shell interprets $val as shell variable, thus we need quote if
we use the echo command.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100119023505.31880.17367.stgit@localhost6.localdomain6>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'perf/scheduling' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core

When a task gets scheduled in. We don't touch the cpu bound events
so the priority order becomes:

	cpu pinned, cpu flexible, task pinned, task flexible.

So schedule out cpu flexibles when a new task context gets in
and correctly order the groups to schedule in:

	task pinned, cpu flexible, task flexible.

Cpu pinned groups don't need to be touched at this time.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

We don't need to schedule in/out pinned events on task tick,
now that pinned and flexible groups can be scheduled separately.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

Tune the scheduling helpers so that we can choose to schedule either
pinned and/or flexible groups from a context.

And while at it, refactor a bit the naming of these helpers to make
these more consistent and flexible.

There is no (intended) change in scheduling behaviour in this
patch.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

__perf_event_sched_out doesn't need to be globally available, make
it static.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

Update kprobe tracing self test for new syntax (it supports
deleting individual probes, and drops $argN support)
and behavior change (new probes are disabled in default).

This selftest includes the following checks:

 - Adding function-entry probe and return probe with arguments.
 - Enabling these probes.
 - Deleting it individually.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100114051211.7814.29436.stgit@localhost6.localdomain6>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I got this build error when building tip tree:

| cc1: warnings being treated as errors
| builtin-probe.c:123: error: 'opt_show_lines' defined but not used

This error is caused by:

| #ifndef NO_LIBDWARF
|	OPT_CALLBACK('L', "line", NULL,
|		     "FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]",
|		     "Show source code lines.", opt_show_lines),
| #endif

My environment defines NO_LIBDWARF, so gcc treated
opt_show_lines() as garbage. So I moved opt_show_lines() into
#ifndef NO_LIBDWARF ... #endif block.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1263645076-9993-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

getline() is considered as undeclared in util/util.c because
it includes string.h, that in turn includes stdio.h, without
having defined _GNU_SOURCE.

But util.c also includes util.h that handles the _GNU_SOURCE and
all the needed inclusions already. Let's include only util.h
and sys/mman.h which is the only one header not handled by
util.h

This fixes the following build error:

 util/util.c: In function 'slow_copyfile':
 util/util.c:49: erreur: implicit declaration of function
 'getline' util/util.c:49: erreur: nested extern declaration of 'getline'
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263648075-3858-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before scheduling an event group, we first check if a group can go
on. We first check if the group is made of software only events
first, in which case it is enough to know if the group can be
scheduled in.

For that purpose, we iterate through the whole group, which is
wasteful as we could do this check when we add/delete an event to
a group.

So we create a group_flags field in perf event that can host
characteristics from a group of events, starting with a first
PERF_GROUP_SOFTWARE flag that reduces the check on the fast path.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

This is more proper that doing it through a list_for_each_entry()
that breaks after the first entry.

v2: Don't rotate pinned groups as its not needed to time share
them.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

Bring a new list_rotate_left() helper that rotates a list to
the left. This is useful for codes that need to round roubin
elements which queue priority increases from tail to head.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

Split-up struct perf_event_context::group_list into pinned_groups
and flexible_groups (non-pinned).

This first appears to be useless as it duplicates various loops around
the group list handlings.

But it scales better in the fast-path in perf_sched_in(). We don't
anymore iterate twice through the entire list to separate pinned and
non-pinned scheduling. Instead we interate through two distinct lists.

The another desired effect is that it makes easier to define distinct
scheduling rules on both.

Changes in v2:
- Respectively rename pinned_grp_list and
  volatile_grp_list into pinned_groups and flexible_groups as per
  Ingo suggestion.
- Various cleanups
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>

As it is in PARISC64:

parisc:~# uname -a
Linux parisc 2.6.33-rc4-tip+ #1 SMP Thu Jan 14 13:33:34 BRST
2010 parisc64 GNU/Linux parisc:~# grep -w _text /proc/kallsyms
0000000040100000 A _text
parisc:~# grep 0000000040100000 /proc/kallsyms
0000000040100000 T stext
0000000040100000 T _stext
0000000040100000 A _text
parisc:~#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263586107-1756-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The event interception we need to do in 'perf record' to create
a list of all DSOs in PERF_RECORD_MMAP events wasn't seeing all
events, make sure that happens by checking size agains
event_t->header.size.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263586107-1756-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It uses 'perf buildid-list --with-hits' to create a tarball with
what is needed to have in the destination machine ~/.debug
hierarchy to properly decode the perf.data file specified.

Here is an example where a perf.data file collected on a x86-64
machine running Fedora 12 is used and then the data is packaged,
transferred and decoded on a PARISC64 machine running Debian
Testing, 32-bit userspace:

[root@doppio linux-2.6-tip]# uname -a
Linux doppio.ghostprotocols.net 2.6.33-rc4-tip+ #3 SMP Wed Jan 13 11:58:15 BRST 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@doppio linux-2.6-tip]# perf archive
[root@doppio linux-2.6-tip]# ls -la perf.data*
-rw------- 1 root root  737696 2010-01-14 23:36 perf.data
-rw-r--r-- 1 root root 8840025 2010-01-15 12:27 perf.data.tar.bz2
[root@doppio linux-2.6-tip]# scp perf.data.* parisc64:.
Password:
perf.data.tar.bz2                                      100% 8633KB   1.4MB/s   00:06
[root@doppio linux-2.6-tip]# ssh parisc64
Password:
Linux parisc 2.6.19-g2bbf29ac-dirty #1 Sun Dec 3 17:24:04 BRST 2006 parisc64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Thu Jan 14 11:23:24 2010 from d
parisc:~# uname -a
Linux parisc 2.6.19-g2bbf29ac-dirty #1 Sun Dec 3 17:24:04 BRST 2006 parisc64 GNU/Linux
parisc:~# mkdir .debug
parisc:~# tar xvf perf.data.tar.bz2 -C ~/.debug
tar: Record size = 8 blocks
.build-id/74/f9930ee94475b6b3238caf3725a50d59cb994b
[kernel.kallsyms]/74f9930ee94475b6b3238caf3725a50d59cb994b
.build-id/9f/fdcac0a7935922d1f04b6cc9029dfef0f066ef
lib/modules/2.6.33-rc4-tip+/kernel/arch/x86/crypto/aes-x86_64.ko/9ffdcac0a7935922d1f04b6cc9029dfef0f066ef
.build-id/3a/af89c32ebfc438ff546c93597d41788e3e65f3
lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko/3aaf89c32ebfc438ff546c93597d41788e3e65f3
.build-id/19/f46033f73e1ec612937189bb118c5daba5a0c8
lib/modules/2.6.33-rc4-tip+/kernel/net/mac80211/mac80211.ko/19f46033f73e1ec612937189bb118c5daba5a0c8
.build-id/17/72f014a7a7272859655acb0c64a20ab20b75ee
lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko/1772f014a7a7272859655acb0c64a20ab20b75ee
.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1
lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1
.build-id/5c/68f7afeb33309c78037e374b0deee84dd441f6
lib64/libpthread-2.10.2.so/5c68f7afeb33309c78037e374b0deee84dd441f6
.build-id/e9/c9ad5c138ef882e4507d2605645b597da43873
bin/dbus-daemon/e9c9ad5c138ef882e4507d2605645b597da43873
.build-id/bc/da7d09eb6c9ee380dae0ed3d591d4311decc31
lib64/libdbus-1.so.3.4.0/bcda7d09eb6c9ee380dae0ed3d591d4311decc31
.build-id/7c/c449a77f48b85d6088114000e970ced613bed8
usr/lib64/libcrypto.so.0.9.8k/7cc449a77f48b85d6088114000e970ced613bed8
.build-id/fd/d1ccd1ff7917ab020653147ab3bacf0a85b5b9
lib64/libglib-2.0.so.0.2000.5/fdd1ccd1ff7917ab020653147ab3bacf0a85b5b9
.build-id/e4/417ebb8762e5f2eee93c8011a71115ff5edad8
lib64/libgobject-2.0.so.0.2000.5/e4417ebb8762e5f2eee93c8011a71115ff5edad8
.build-id/93/1e49461f6df99104f0febcc52f6fed5e2efce6
usr/sbin/sshd/931e49461f6df99104f0febcc52f6fed5e2efce6
.build-id/da/b5f724c088f89fbd8304da553ed6cb30bbec96
usr/lib64/libgdk-x11-2.0.so.0.1600.6/dab5f724c088f89fbd8304da553ed6cb30bbec96
.build-id/f2/037a091ef36b591187a858d75e203690ea9409
usr/sbin/openvpn/f2037a091ef36b591187a858d75e203690ea9409
.build-id/a8/e4f743b40fb1fd8b85e2f9b88d93b661472b8f
bin/find/a8e4f743b40fb1fd8b85e2f9b88d93b661472b8f
.build-id/81/120aada06e68b1e85882925a0fc6d7345ef59a
home/acme/bin/perf/81120aada06e68b1e85882925a0fc6d7345ef59a
parisc:~# perf report 2> /dev/null | head -25
     9.07%             find  find                               [.] 0x0000000000fb0e
     3.29%             perf  libc-2.10.2.so                     [.] __GI_strcmp
     3.19%             find  [kernel.kallsyms]                  [k] _raw_spin_unlock_irqrestore
     2.70%             find  libc-2.10.2.so                     [.] __GI_memmove
     2.62%             perf  [kernel.kallsyms]                  [k] vsnprintf
     2.03%             find  libc-2.10.2.so                     [.] _int_malloc
     2.02%             perf  [kernel.kallsyms]                  [k] format_decode
     1.70%             find  [kernel.kallsyms]                  [k] n_tty_write
     1.70%             find  [kernel.kallsyms]                  [k] half_md4_transform
     1.67%             find  libc-2.10.2.so                     [.] _IO_vfprintf_internal
     1.66%             perf  [kernel.kallsyms]                  [k] audit_free_aux
     1.62%          swapper  [kernel.kallsyms]                  [k] mwait_idle_with_hints
     1.58%             find  [kernel.kallsyms]                  [k] __kmalloc
     1.35%             find  [kernel.kallsyms]                  [k] sched_clock_local
     1.35%             find  [kernel.kallsyms]                  [k] ext4_check_dir_entry
     1.35%             find  [kernel.kallsyms]                  [k] ext4_htree_store_dirent
     1.35%             find  [kernel.kallsyms]                  [k] sys_write
     1.35%             find  [e1000e]                           [k] e1000_clean
     1.35%             find  [kernel.kallsyms]                  [k] _atomic_dec_and_lock
     1.34%             find  [kernel.kallsyms]                  [k] __d_lookup
parisc:~#

Probably the next step is to have 'perf report' notice that there is a
perf.data.tar.bz2 file in the same directory and look if it was already
added to ~/.debug/.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263568672-30323-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since we use ->long_name in dsos__find now.

Now 'perf buildid_list' is not duplicating those and managing to
show the proper build-ids for the DSOs with hits:

[root@doppio linux-2.6-tip]# perf buildid-list -H
74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]
9ffdcac0a7935922d1f04b6cc9029dfef0f066ef /lib/modules/2.6.33-rc4-tip+/kernel/arch/x86/crypto/aes-x86_64.ko
3aaf89c32ebfc438ff546c93597d41788e3e65f3 /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
19f46033f73e1ec612937189bb118c5daba5a0c8 /lib/modules/2.6.33-rc4-tip+/kernel/net/mac80211/mac80211.ko
1772f014a7a7272859655acb0c64a20ab20b75ee /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko
eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 /lib64/libc-2.10.2.so
5c68f7afeb33309c78037e374b0deee84dd441f6 /lib64/libpthread-2.10.2.so
e9c9ad5c138ef882e4507d2605645b597da43873 /bin/dbus-daemon
bcda7d09eb6c9ee380dae0ed3d591d4311decc31 /lib64/libdbus-1.so.3.4.0
7cc449a77f48b85d6088114000e970ced613bed8 /usr/lib64/libcrypto.so.0.9.8k
fdd1ccd1ff7917ab020653147ab3bacf0a85b5b9 /lib64/libglib-2.0.so.0.2000.5
e4417ebb8762e5f2eee93c8011a71115ff5edad8 /lib64/libgobject-2.0.so.0.2000.5
931e49461f6df99104f0febcc52f6fed5e2efce6 /usr/sbin/sshd
dab5f724c088f89fbd8304da553ed6cb30bbec96 /usr/lib64/libgdk-x11-2.0.so.0.1600.6
f2037a091ef36b591187a858d75e203690ea9409 /usr/sbin/openvpn
a8e4f743b40fb1fd8b85e2f9b88d93b661472b8f /bin/find
81120aada06e68b1e85882925a0fc6d7345ef59a /home/acme/bin/perf
[root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263568672-30323-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Using this option 'perf buildid-list' will process all samples,
marking the DSOs that had some hits to list just them.

This in turn will be used by a new porcelain, 'perf archive',
that will be just a shell script to create a tarball from the
'perf buildid-list --with-hits' output and the files cached by
'perf record' in ~/.debug.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because some tools will only want to know with maps had hits,
not needing the full symbol resolution done by
thread__find_addr_location.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the past 'perf record' had to process only userspace MMAP
events, the ones generated in the kernel, but after we reused
the MMAP events to encode the module mapings we ended up adding
them first to the list of userspace DSOs (dsos__user) and to the
kernel one (dsos__kernel).

Fix this by encoding the header.misc field and then using it,
like other parts to decide the right DSOs list to insert/find.

The gotcha here is that since the kernel puts zero in .misc,
which isn't PERF_RECORD_MISC_KERNEL (1 << 1), to differentiate,
we put 1 in .misc.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If not we end up duplicating the module DSOs because first we
insert them using the short name found in /proc/modules, then,
when processing synthesized MMAP events we add them again.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that when we don't have a vmlinux handy we can store the
kallsyms for later use by 'perf report'.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now a perf.data file collected on a x86_64 fedora 12 machine
gets properly parsed on a Debian testing PARISC64 machine with
32-bit userland:

  acme@parisc:~/git/linux-2.6-tip$ perf report 2> /dev/null | head -15
  # Samples: 293085637
  #
  # Overhead          Command                      Shared Object  Symbol
  # ........  ...............  .................................  ......
  #
      35.11%             find  [kernel.kallsyms]                  [k] 0xffffffff81002b5a
      18.25%             perf  [kernel.kallsyms]                  [k] 0xffffffff8102235f
       9.07%             find  find                               [.] 0x0000000000fb0e
       5.80%          swapper  [kernel.kallsyms]                  [k] 0xffffffff8102235f
       3.29%             perf  libc-2.10.2.so                     [.] __GI_strcmp
       2.70%             find  libc-2.10.2.so                     [.] __GI_memmove
       2.33%             init  [kernel.kallsyms]                  [k] 0xffffffff810091b9
       2.03%             find  libc-2.10.2.so                     [.] _int_malloc
       1.67%             find  libc-2.10.2.so                     [.] _IO_vfprintf_internal
       1.65%             sshd  libcrypto.so.0.9.8k                [.] 0x00000000105440
  acme@parisc:~/git/linux-2.6-tip$
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Using the more portable and equivalent sysconf call.
Reported-by: NAristeu Rozanski <aris@redhat.com>
Reported-by: NUlrich Drepper <drepper@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ulrich Drepper <drepper@redhat.com>
LKML-Reference: <1263501006-14185-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There are still some problems related to loading vmlinux files,
but those are unrelated to the feature implemented in this
patch, so will get fixed in the next patches, but here are some
results:

1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit
userland

2. transfer it to a Debian Testing machine, PARISC64, 32-bit
userland

  acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5
  74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]
  55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko
  41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko
  90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko
  984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko

  acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5
  22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0
  353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0
  d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0
  a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf
  d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0
  acme@parisc:~/git/linux-2.6-tip$

  acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm
  The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms...

  ^^^^ The problem related to vmlinux handling, it shouldn't be trying this
  ^^^^ rather alien /proc/kallsyms at all...

  /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols
  /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols
  /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols
  /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols
  Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols
  Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols

  <SNIP more complaints about not finding the right build-ids,
        those will have to wait for 'perf archive' or plain
        copying what was collected by 'perf record' on the x86_64,
        source machine, see further below for an example of this >

  # Samples: 293085637
  #
  # Overhead          Command
  # ........  ...............
  #
      61.70%             find
      23.50%             perf
       5.86%          swapper
       3.12%             sshd
       2.39%             init
       0.87%             bash
       0.86%            sleep
       0.59%      dbus-daemon
       0.25%             hald
       0.24%   NetworkManager
       0.19%  hald-addon-rfki
       0.15%          openvpn
       0.07%             phy0
       0.07%         events/0
       0.05%          iwl3945
       0.05%         events/1
       0.03%      kondemand/0
  acme@parisc:~/git/linux-2.6-tip$

Which matches what we get when running the same command for the
same perf.data file on the F12, x86_64, source machine:

  [root@doppio linux-2.6-tip]# perf report --sort comm
  # Samples: 293085637
  #
  # Overhead          Command
  # ........  ...............
  #
      61.70%             find
      23.50%             perf
       5.86%          swapper
       3.12%             sshd
       2.39%             init
       0.87%             bash
       0.86%            sleep
       0.59%      dbus-daemon
       0.25%             hald
       0.24%   NetworkManager
       0.19%  hald-addon-rfki
       0.15%          openvpn
       0.07%             phy0
       0.07%         events/0
       0.05%          iwl3945
       0.05%         events/1
       0.03%      kondemand/0
  [root@doppio linux-2.6-tip]#

The other modes work as well, modulo the problem with vmlinux:

  acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15
  # Samples: 293085637
  #
  # Overhead          Command                      Shared Object
  # ........  ...............  .................................
  #
      35.11%             find                   ffffffff81002b5a
      18.25%             perf                   ffffffff8102235f
      16.17%             find  libc-2.10.2.so
       9.07%             find  find
       5.80%          swapper                   ffffffff8102235f
       3.95%             perf  libc-2.10.2.so
       2.33%             init                   ffffffff810091b9
       1.65%             sshd  libcrypto.so.0.9.8k
       1.35%             find  [e1000e]
       0.68%            sleep  libc-2.10.2.so
  acme@parisc:~/git/linux-2.6-tip$

And the lack of the right buildids:

  acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15
  # Samples: 293085637
  #
  # Overhead          Command                      Shared Object  Symbol
  # ........  ...............  .................................  ......
  #
      35.11%             find                   ffffffff81002b5a  [k] 0xffffffff81002b5a
      18.25%             perf                   ffffffff8102235f  [k] 0xffffffff8102235f
      16.17%             find  libc-2.10.2.so                     [.] 0x00000000045782
       9.07%             find  find                               [.] 0x0000000000fb0e
       5.80%          swapper                   ffffffff8102235f  [k] 0xffffffff8102235f
       3.95%             perf  libc-2.10.2.so                     [.] 0x0000000007f398
       2.33%             init                   ffffffff810091b9  [k] 0xffffffff810091b9
       1.65%             sshd  libcrypto.so.0.9.8k                [.] 0x00000000105440
       1.35%             find  [e1000e]                           [k] 0x00000000010948
       0.68%            sleep  libc-2.10.2.so                     [.] 0x0000000011ad5b
  acme@parisc:~/git/linux-2.6-tip$

But if we:

  acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug
  ls: cannot access /home/acme/.debug: No such file or directory
  acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/
  acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/
  acme@doppio's password:
  eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1	             100% 1783KB 714.7KB/s   00:02
  acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb
  acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1
  acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null
  # dso: libc-2.10.2.so
  # Samples: 64281170
  #
  # Overhead          Command  Symbol
  # ........  ...............  ......
  #
      14.98%             perf  [.] __GI_strcmp
      12.30%             find  [.] __GI_memmove
       9.25%             find  [.] _int_malloc
       7.60%             find  [.] _IO_vfprintf_internal
       6.10%             find  [.] _IO_new_file_xsputn
       6.02%             find  [.] __GI_close
       3.08%             find  [.] _IO_file_overflow_internal
       3.08%             find  [.] malloc_consolidate
       3.08%             find  [.] _int_free
       3.08%             find  [.] __strchrnul
       3.08%             find  [.] __getdents64
       3.08%             find  [.] __write_nocancel
       3.08%            sleep  [.] __GI__dl_addr
       3.08%             sshd  [.] __libc_select
       3.08%             find  [.] _IO_new_file_write
       3.07%             find  [.] _IO_new_do_write
       3.06%             find  [.] __GI___errno_location
       3.05%             find  [.] __GI___libc_malloc
       3.04%             perf  [.] __GI_memcpy
       1.71%             find  [.] __fprintf_chk
       1.29%             bash  [.] __gconv_transform_utf8_internal
       0.79%      dbus-daemon  [.] __GI_strlen
  #
  # (For a higher level overview, try: perf report --sort comm,dso)
  #
  acme@parisc:~/git/linux-2.6-tip$

Which matches what we get on the source, F12, x86_64 machine:

  [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so
  # dso: libc-2.10.2.so
  # Samples: 64281170
  #
  # Overhead          Command  Symbol
  # ........  ...............  ......
  #
      14.98%             perf  [.] __GI_strcmp
      12.30%             find  [.] __GI_memmove
       9.25%             find  [.] _int_malloc
       7.60%             find  [.] _IO_vfprintf_internal
       6.10%             find  [.] _IO_new_file_xsputn
       6.02%             find  [.] __GI_close
       3.08%             find  [.] _IO_file_overflow_internal
       3.08%             find  [.] malloc_consolidate
       3.08%             find  [.] _int_free
       3.08%             find  [.] __strchrnul
       3.08%             find  [.] __getdents64
       3.08%             find  [.] __write_nocancel
       3.08%            sleep  [.] __GI__dl_addr
       3.08%             sshd  [.] __libc_select
       3.08%             find  [.] _IO_new_file_write
       3.07%             find  [.] _IO_new_do_write
       3.06%             find  [.] __GI___errno_location
       3.05%             find  [.] __GI___libc_malloc
       3.04%             perf  [.] __GI_memcpy
       1.71%             find  [.] __fprintf_chk
       1.29%             bash  [.] __gconv_transform_utf8_internal
       0.79%      dbus-daemon  [.] __GI_strlen
  #
  # (For a higher level overview, try: perf report --sort comm,dso)
  #
  [root@doppio linux-2.6-tip]#

So I think this is really, really nice in that it demonstrates
the portability of perf.data files and the use of build-ids
accross such aliens worlds :-)

There are some things to fix tho, like the bitmap on the header,
but things are looking good.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since they can come from another architecture with bigger
pointers, i.e. processing a 64-bit perf.data on a 32-bit arch.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sym_filter is what was (if ever) passed with -s option. What was
typed by user, and what we were looking for, is in buf.
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1263396139-4798-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1263396139-4798-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We were always looking at the running machine /proc/modules,
even when processing a perf.data file, which only makes sense
when we're doing 'perf record' and 'perf report' on the same
machine, and in close sucession, or if we don't use modules at
all, right Peter? ;-)

Now, at 'perf record' time we read /proc/modules, find the long
path for modules, and put them as PERF_MMAP events, just like we
did to encode the reloc reference symbol for vmlinux. Talking
about that now it is encoded in .pgoff, so that we can use
.{start,len} to store the address boundaries for the kernel so
that when we reconstruct the kmaps tree we can do lookups right
away, without having to fixup the end of the kernel maps like we
did in the past (and now only in perf record).

One more step in the 'perf archive' direction when we'll finally
be able to collect data in one machine and analyse in another.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263396139-4798-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove branch for is_perf_command.
Signed-off-by: NWenji Huang <wenji.huang@oracle.com>
Cc: fweisbec@gmail.com
Cc: jkacur@redhat.com
Cc: acme@redhat.com
LKML-Reference: <1263373298-13282-1-git-send-email-wenji.huang@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf_event_task_sched_in() expects interrupts to be disabled,
but on architectures with __ARCH_WANT_INTERRUPTS_ON_CTXSW
defined, this isn't true. If this is defined, disable irqs
around the call in finish_task_switch().
Signed-off-by: NJamie Iles <jamie.iles@picochip.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
LKML-Reference: <1262964453-27370-1-git-send-email-jamie.iles@picochip.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262901583-8074-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can restore them to the right DSO list (either
dsos__kernel or dsos__user).

We do that just like the kernel does for the other events,
encoding PERF_RECORD_MISC_{KERNEL,USER} in perf_event_header.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262901583-8074-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

As it is already processed by:

	perf_session__new
		perf_session__open
			perf_session__read

This was harmless, because we use dsos__findnew, that would
already find it, but is unnecessary work and removing it makes
builtin-buildid-list.c even shorter.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262901583-8074-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <1262882447-23776-2-git-send-email-a.beregalov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>