In case an interface has been brought down before entering S3, and then
brought up out of S3, all the initialization done during
bcmgenet_probe() by bcmgenet_mii_init() calling bcmgenet_mii_config() is
just lost since register contents are restored to their reset values.

Re-apply this configuration anytime we call bcmgenet_open() to make sure
our port multiplexer is properly configured to match the PHY interface.

Since we are now calling bcmgenet_mii_config() everytime bcmgenet_open()
is called, make sure we only print the message during initialization
time not to pollute the console.

Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks")
Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phy_disconnect() is the only way to guarantee that we are not going to
schedule more work on the PHY state machine workqueue for that
particular PHY device.

This fixes an issue where a network interface was suspended prior to a
system suspend/resume cycle and would then be resumed as part of
mdio_bus_resume(), since the GENET interface clocks would have been
disabled, this basically resulted in bus errors to appear since we are
invoking the GENET driver adjust_link() callback.

Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the dependency of the VENDOR entry and fixes
the QCA7000 one.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Status variable is never initialized, can carry an arbitrary value
on the stack and thus may let the function fail.

Fixes: e90dd264 ("ixgbe: Make return values more direct")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When advertised capabilities are changed with mii-tool, such as:
mii-tool -A 10baseT
the existing handler has two errors.

- An actual PHY register value is provided by mii-tool, and this
  must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
  again been performed.  If not, the MAC will not be notified of
  the new link speed and duplex, resulting in a possible config
  mismatch.
Signed-off-by: NBrian Hill <Brian@houston-radar.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is
a module.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: c8e6ad08 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg")
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A very minimal and simple user space application allocating an SCTP
socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing
the socket again will leak the memory containing the authentication
key from user space:

unreferenced object 0xffff8800837047c0 (size 16):
  comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s)
  hex dump (first 16 bytes):
    01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811c88d8>] __kmalloc+0xe8/0x270
    [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp]
    [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp]
    [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp]
    [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20
    [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0
    [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17
    [<ffffffffffffffff>] 0xffffffffffffffff

This is bad because of two things, we can bring down a machine from
user space when auth_enable=1, but also we would leave security sensitive
keying material in memory without clearing it after use. The issue is
that sctp_auth_create_key() already sets the refcount to 1, but after
allocation sctp_auth_set_key() does an additional refcount on it, and
thus leaving it around when we free the socket.

Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An SCTP server doing ASCONF will panic on malformed INIT ping-of-death
in the form of:

  ------------ INIT[PARAM: SET_PRIMARY_IP] ------------>

While the INIT chunk parameter verification dissects through many things
in order to detect malformed input, it misses to actually check parameters
inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary
IP address' parameter in ASCONF, which has as a subparameter an address
parameter.

So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS
or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0
and thus sctp_get_af_specific() returns NULL, too, which we then happily
dereference unconditionally through af->from_addr_param().

The trace for the log:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
PGD 0
Oops: 0000 [#1] SMP
[...]
Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs
RIP: 0010:[<ffffffffa01e9c62>]  [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
[...]
Call Trace:
 <IRQ>
 [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp]
 [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp]
 [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp]
 [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp]
 [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp]
 [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp]
 [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp]
 [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter]
 [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0
 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120
 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
[...]

A minimal way to address this is to check for NULL as we do on all
other such occasions where we know sctp_get_af_specific() could
possibly return with NULL.

Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ppp_ioctl(), bpf_prog_create() is called inside ppp_lock, which
eventually calls vmalloc() and hits BUG_ON() in vmalloc.c.  This patch
works around the problem by moving the allocation outside the lock.

The bug was revealed by the recent change in net/core/filter.c, as it
allocates via vmalloc() instead of kmalloc() now.
Reported-and-tested-by: NStefan Seyfried <stefan.seyfried@googlemail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currenly we only support Large-Send and TX checksum offloads for
encapsulated traffic of type VXLAN. We must make sure to advertize
these offloads up to the stack only when VXLAN tunnel is set.

Failing to do so, would mislead the the networking stack to assume
that the driver can offload the internal TX checksum for GRE packets
and other buggy schemes.
Reported-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike CEE, IEEE has a bespoke app delete call and does not rely on priority
for app deletion

Fixes : 2376c879 ('cxgb4 : Improve handling of DCB negotiation or loss
 thereof')
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When doing GRO processing for UDP tunnels, we never add
SKB_GSO_UDP_TUNNEL to gso_type - only the type of the inner protocol
is added (such as SKB_GSO_TCPV4). The result is that if the packet is
later resegmented we will do GSO but not treat it as a tunnel. This
results in UDP fragmentation of the outer header instead of (i.e.) TCP
segmentation of the inner header as was originally on the wire.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4/cxgb4vf: Misc. fixes for cxgb4vf

For T5 use Packing and Padding Boundaries for SGE DMA transfers, move
fl_starve_thres to adpater structure, since they are different for each
adapter. The cxgb4vf driver's Free List Starvation Threshold needs to be larger
than the SGE's Egress Congestion Threshold or we'll end up in a mutual stall
where the driver waits for Ingress Packets to drive replacing Free List
Pointers and the SGE waits for Free List Pointers before pushing Ingress
Packets to the host.

The patches series is created against 'net' tree.
And includes patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free List Starvation Threshold needs to be larger than the SGE's Egress
Congestion Threshold or we'll end up in a mutual stall where the driver waits
for Ingress Packets to drive replacing Free List Pointers and the SGE waits for
Free List Pointers before pushing Ingress Packets to the host.

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

T5 introduces the ability to have separate Packing and Padding Boundaries
for SGE DMA transfers from the chip to Host Memory. This change set takes
advantage of that to set up a smaller Padding Boundary to conserve PCI Link
and Memory Bandwidth with T5.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move fl_starv_thres into adapter->sge data structure since it
_could_ be different from adapter to adapter.  Also move other per-adapter
SGE values which had been treated as driver globals into adapter->sge.

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 3cc81d85 ("asix: Don't reset PHY on if_up for ASIX 88772")
causes the ethernet on Arndale to no longer function. This appears to
be because the Arndale ethernet requires a full reset before it will
function correctly, however simply reverting the above patch causes
problems with ethtool settings getting reset.

It seems the problem is that the ethernet is not properly reset during
bind, and indeed the code in ax88772_bind that resets the device is a
very small subset of the actual ax88772_reset function. This patch uses
ax88772_reset in place of the existing reset code in ax88772_bind which
removes some code duplication and fixes the ethernet on Arndale.

It is still possible that the original patch causes some issues with
suspend and resume but that seems like a separate issue and I haven't
had a chance to test that yet.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 1b7bde6d ("net: fec: implement rx_copybreak to improve rx performance")
introduced a regression for i.MX28. The swap_buffer() function doing
the endian conversion of the received data on i.MX28 may access memory
beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
does not copy those bytes, so that the last bytes of a packet may be
filled with invalid data after swapping.
This will likely lead to checksum errors on received packets.
E.g. when trying to mount an NFS rootfs:
UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36

Do the byte swapping and copying to the new skb in one go if
necessary.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
pull request: wireless 2014-11-06

Please pull this batch of fixes intended for the 3.18 stream...

For the mac80211 bits, Johannes says:

"This contains another small set of fixes for 3.18, these are all
over the place and most of the bugs are old, one even dates back
to the original mac80211 we merged into the kernel."

For the iwlwifi bits, Emmanuel says:

"I fix here two issues that are related to the firmware
loading flow. A user reported that he couldn't load the
driver because the rfkill line was pulled up while we
were running the calibrations. This was happening while
booting the system: systemd was restoring the "disable
wifi settings" and that raised an RFKILL interrupt during
the calibration. Our driver didn't handle that properly
and this is now fixed."

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Poll for the link events only if firmware doesn't have capability
  to notify the driver for the link events.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we reuse the rx buffer, we need to update the desc. If not hardware sees
stale value.

In the following crash, when mtu is changed, hardware sees old rx buffer value
and crashes on skb_put.

Fix this by using enic_queue_rq_desc helper function which updates the necessary
desc.

[   64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3
[   64.659965] ------------[ cut here ]------------
[   64.661322] kernel BUG at net/core/skbuff.c:100!
[   64.662644] invalid opcode: 0000 [#1] PREEMPT SMP
[   64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod
[   64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W      3.17.0-netnext-10335-g942396b0-dirty #273
[   64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000
[   64.664834] RIP: 0010:[<ffffffff81392cf1>]  [<ffffffff81392cf1>] skb_panic+0x61/0x70
[   64.664834] RSP: 0018:ffff880210603d48  EFLAGS: 00010292
[   64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000
[   64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff
[   64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001
[   64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40
[   64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001
[   64.664834] FS:  0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000
[   64.664834] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0
[   64.664834] Stack:
[   64.664834]  ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000
[   64.664834]  ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d
[   64.664834]  0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332
[   64.664834] Call Trace:
[   64.664834]  <IRQ>
[   64.664834]
[   64.664834]  [<ffffffff81392d54>] skb_put+0x54/0x60
[   64.664834]  [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic]
[   64.664834]  [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic]
[   64.664834]  [<ffffffff813a5499>] net_rx_action+0x139/0x210
[   64.664834]  [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20
[   64.664834]  [<ffffffff8106110e>] __do_softirq+0x14e/0x280
[   64.664834]  [<ffffffff8106152e>] irq_exit+0x8e/0xb0
[   64.664834]  [<ffffffff8100fd21>] do_IRQ+0x61/0x100
[   64.664834]  [<ffffffff814a2bf2>] common_interrupt+0x72/0x72

fixes: a03bb56e ("enic: implement rx_copybreak")
Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case of error in rx path, we free the buf->os_buf but we do not make it NULL.
In next iteration we use the skb which is already freed. This causes the
following crash.

[  886.154772] general protection fault: 0000 [#1] PREEMPT SMP
[  886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common
[  886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W      3.17.0-netnext-05668-g876bc7f #272
[  886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000
[  886.155356] RIP: 0010:[<ffffffff81384030>]  [<ffffffff81384030>] kfree_skb_list+0x10/0x30
[  886.155418] RSP: 0018:ffff880210603d48  EFLAGS: 00010206
[  886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000
[  886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017
[  886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001
[  886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00
[  886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80
[  886.155699] FS:  0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000
[  886.155774] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0
[  886.155865] Stack:
[  886.155882]  0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00
[  886.155942]  ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf
[  886.156001]  ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0
[  886.156061] Call Trace:
[  886.156080]  <IRQ>
[  886.156095]
[  886.156112]  [<ffffffff81383f79>] skb_release_data+0xa9/0xc0
[  886.157656]  [<ffffffff81383faf>] skb_release_all+0x1f/0x30
[  886.159195]  [<ffffffff8138406d>] consume_skb+0x1d/0x40
[  886.160719]  [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40
[  886.162224]  [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic]
[  886.163756]  [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic]
[  886.164730]  [<ffffffff81397e29>] net_rx_action+0x139/0x210
[  886.164730]  [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280
[  886.164730]  [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0
[  886.164730]  [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100
[  886.164730]  [<ffffffff81496832>] common_interrupt+0x72/0x72

fixes: a03bb56e ("enic: implement rx_copybreak")
Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eli Cohen says:

====================
mlx5_core fixes for 3.18

the following two patches fix races to could lead to kernel panic in some cases.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When events arrive at driver load, the event handler gets called even before
the spinlock and list are initialized. Fix this by moving the initialization
before EQs creation.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the EQ is created, it can possibly generate interrupts and the interrupt
handler is referencing eq->dev. It is therefore required to set eq->dev before
calling request_irq() so if an event is generated before request_irq() returns,
we will have a valid eq->dev field.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the ports phys are connected to the switches internal MDIO bus,
we need to connect the phy to the slave netdev, otherwise
auto-negotiation etc, does not work.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRyo Munakata <ryomnktml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when cpsw is build as modulea and simple insert and removal of module
creates a deadlock, due to delete timer. the timer is created and destroyed
in cpsw_ale_start and cpsw_ale_stop which are from device open and close.

root@am437x-evm:~# modprobe -r ti_cpsw
[  158.505333] INFO: trying to register non-static key.
[  158.510623] the code is fine but needs lockdep annotation.
[  158.516448] turning off the locking correctness validator.
[  158.522282] CPU: 0 PID: 1339 Comm: modprobe Not tainted 3.14.23-00445-gd41c88f #44
[  158.530359] [<c0015380>] (unwind_backtrace) from [<c0012088>] (show_stack+0x10/0x14)
[  158.538603] [<c0012088>] (show_stack) from [<c054ad70>] (dump_stack+0x78/0x94)
[  158.546295] [<c054ad70>] (dump_stack) from [<c0088008>] (__lock_acquire+0x176c/0x1b74)
[  158.554711] [<c0088008>] (__lock_acquire) from [<c0088944>] (lock_acquire+0x9c/0x104)
[  158.563043] [<c0088944>] (lock_acquire) from [<c004e520>] (del_timer_sync+0x44/0xd8)
[  158.571289] [<c004e520>] (del_timer_sync) from [<bf2eac1c>] (cpsw_ale_destroy+0x10/0x3c [ti_cpsw])
[  158.580821] [<bf2eac1c>] (cpsw_ale_destroy [ti_cpsw]) from [<bf2eb268>] (cpsw_remove+0x30/0xa0 [ti_cpsw])
[  158.591000] [<bf2eb268>] (cpsw_remove [ti_cpsw]) from [<c035ef44>] (platform_drv_remove+0x18/0x1c)
[  158.600527] [<c035ef44>] (platform_drv_remove) from [<c035d8bc>] (__device_release_driver+0x70/0xc8)
[  158.610236] [<c035d8bc>] (__device_release_driver) from [<c035e0d4>] (driver_detach+0xb4/0xb8)
[  158.619386] [<c035e0d4>] (driver_detach) from [<c035d6e4>] (bus_remove_driver+0x4c/0x90)
[  158.627988] [<c035d6e4>] (bus_remove_driver) from [<c00af2a8>] (SyS_delete_module+0x10c/0x198)
[  158.637144] [<c00af2a8>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48)
[  179.524727] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1487, c=1486, q=6)
[  179.535741] INFO: Stall ended before state dump start
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ATM, txq_reclaim will dequeue and free an skb for each tx desc released
by the hw that has TX_LAST_DESC set. However, in case of TSO, each
hw desc embedding the last part of a segment has TX_LAST_DESC set,
losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance,
which causes data corruption.

Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and
warn when trying to dequeue from an empty txq (which can be symptomatic
of releasing skbs prematurely).

Fixes: 3ae8f4e0 ('net: mv643xx_eth: Implement software TSO')
Reported-by: NSlawomir Gajzner <slawomir.gajzner@gmail.com>
Reported-by: NJulien D'Ascenzio <jdascenzio@yahoo.fr>
Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if_bridge.h uses struct in6_addr ip6, but wasn't including the in6.h
header.  Thomas Backlund originally sent a patch to do this, but this
revealed a redefinition issue: https://lkml.org/lkml/2013/1/13/116

The redefinition issue should have been fixed by the following Linux
commits:
ee262ad8 inet: defines IPPROTO_* needed for module alias generation
cfd280c9 net: sync some IP headers with glibc

and the following glibc commit:
6c82a2f8d7c8e21e39237225c819f182ae438db3 Coordinate IPv6 definitions for Linux and glibc

so actually include the header now.
Reported-by: NColin Guthrie <colin@mageia.org>
Reported-by: NChristiaan Welvaart <cjw@daneel.dyndns.org>
Reported-by: NThomas Backlund <tmb@mageia.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NGregory Fong <gregory.0xf0@gmail.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ueki Kohei reported that when we are using NewReno with connections that
have a very low traffic, we may timeout the connection too early if a
second loss occurs after the first one was successfully acked but no
data was transfered later. Below is his description of it:

When SACK is disabled, and a socket suffers multiple separate TCP
retransmissions, that socket's ETIMEDOUT value is calculated from the
time of the *first* retransmission instead of the *latest*
retransmission.

This happens because the tcp_sock's retrans_stamp is set once then never
cleared.

Take the following connection:

                      Linux                    remote-machine
                        |                           |
         send#1---->(*1)|--------> data#1 --------->|
                  |     |                           |
                 RTO    :                           :
                  |     |                           |
                 ---(*2)|----> data#1(retrans) ---->|
                  | (*3)|<---------- ACK <----------|
                  |     |                           |
                  |     :                           :
                  |     :                           :
                  |     :                           :
                16 minutes (or more)                :
                  |     :                           :
                  |     :                           :
                  |     :                           :
                  |     |                           |
         send#2---->(*4)|--------> data#2 --------->|
                  |     |                           |
                 RTO    :                           :
                  |     |                           |
                 ---(*5)|----> data#2(retrans) ---->|
                  |     |                           |
                  |     |                           |
                RTO*2   :                           :
                  |     |                           |
                  |     |                           |
      ETIMEDOUT<----(*6)|                           |

(*1) One data packet sent.
(*2) Because no ACK packet is received, the packet is retransmitted.
(*3) The ACK packet is received. The transmitted packet is acknowledged.

At this point the first "retransmission event" has passed and been
recovered from. Any future retransmission is a completely new "event".

(*4) After 16 minutes (to correspond with retries2=15), a new data
packet is sent. Note: No data is transmitted between (*3) and (*4).

The socket's timeout SHOULD be calculated from this point in time, but
instead it's calculated from the prior "event" 16 minutes ago.

(*5) Because no ACK packet is received, the packet is retransmitted.
(*6) At the time of the 2nd retransmission, the socket returns
ETIMEDOUT.

Therefore, now we clear retrans_stamp as soon as all data during the
loss window is fully acked.

Reported-by: Ueki Kohei
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Tested-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Giuseppe Cavallaro says:

====================
stmmac: review and fix lock and atomicity

Recently some issues have been reported for the driver for locking mechanism
and atomicity.

In fact, enabling DEBUG support to prove lock and to verify if sleeping while
atomic context some warnings occur at runtime. I have reproduced all on STi
platforms.

Concerning the tx path, I had provided a patch time ago but
I discarded the idea to completely remove locks; in this patch-set we can have
some useful fixes instead of.

This patch-set is to fix the atomicity in the PM stuff where I tried to collect
all the points and advice reported in the past weeks.
As final result, on my side no warnings and no problem when suspend/resume the
driver on STi boxes.

I also added a patch that fixes the locks for the EEE.
As pointed in some thread there was a design problem behind the eee
initialization and I have tried to fix that before.
As final result no issues when proving locks too.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to fix the atomicity when suspend and resume the
driver. The clk api have been changed (as reported by Hao Liang)
and the skb allocation is done out of the hw setup function and
taking care about the GFP flags.
Reported-by: NHao Liang <hliang1025@gmail.com>
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Hao Liang <hliang1025@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch aims to fix the concurrency in eee initialization
inside the stmmac driver and related warnings when enable
DEBUG_ATOMIC_SLEEP.

Prior this patch, the stmmac_eee_init could be called in several places
as shown below:

stmmac_open  stmmac_resume         PHY Layer
    |            |                     |
  stmmac_hw_setup           stmmac_adjust_link
    |                                  |           stmmac ethtool
    |__________________________|______________|
                                       |
                                 stmmac_eee_init

The patch removes the stmmac_eee_init call inside the stmmac_hw_setup
that is unnecessary. It is sufficient to call it in the adjust_link to
always guarantee that EEE is always configured at mac level too.

Fixing the lock protection now it is covered another case (not
considered before). The stmmac_eee_init could be called by the ethtool
so critical sections must be protected inside this function too.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When compile with CONFIG_PROVE_LOCKING the following warnings happen:

[snip]

    HARDIRQ-ON-W at:
                        [<c0480c1c>] _raw_spin_lock+0x3c/0x4c
                        [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c
                        [<c038b2cc>] dev_set_rx_mode+0x1c/0x28
                        [<c038b38c>] __dev_open+0xb4/0xf8
                        [<c038b5a8>] __dev_change_flags+0x94/0x128
                        [<c038b6a8>] dev_change_flags+0x10/0x48
                        [<c062afe0>] ip_auto_config+0x1d4/0x1084
                        [<c000873c>] do_one_initcall+0x108/0x15c
                        [<c060ec50>] kernel_init_freeable+0x1a8/0x248
                        [<c0472cc0>] kernel_init+0x8/0x160
                        [<c000dfc8>] ret_from_fork+0x14/0x2c
     INITIAL USE at:
                       [<c0480c1c>] _raw_spin_lock+0x3c/0x4c
                       [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c
                       [<c038b2cc>] dev_set_rx_mode+0x1c/0x28
                       [<c038b38c>] __dev_open+0xb4/0xf8
                       [<c038b5a8>] __dev_change_flags+0x94/0x128
                       [<c038b6a8>] dev_change_flags+0x10/0x48
                       [<c062afe0>] ip_auto_config+0x1d4/0x1084
                       [<c000873c>] do_one_initcall+0x108/0x15c
                       [<c060ec50>] kernel_init_freeable+0x1a8/0x248
                       [<c0472cc0>] kernel_init+0x8/0x160
                       [<c000dfc8>] ret_from_fork+0x14/0x2c

so the patch just removes the lock protection in the stmmac_set_rx_mode
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Emilio Lopez <emilio@elopez.com.ar>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing spin_unlock when tx frames gets dropped.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

stmmac_tx_avail() may lie if used unprotected. It's using cur_tx
and dirty_tx index. These index may be already in use by tx_clean
when entering xmit routine. So, this should be called locked.

This can cause transmit queue to be stuck, with following message:
NETDEV WATCHDOG: eth0 (stmmaceth): transmit queue 0 timed out
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers: net: ethernet: xilinx: xilinx_emaclite: revert the original commit "1db3ddff"

Microblaze is a fpga soft core, it can be customized easily, which may
cause many various hardware version strings.

So the original fix patch based on hard-coded compatible version strings
is not a good idea (although it is correct for current issue). For it,
there will be a new solving way soon (which based on the device tree).

The original issue is related with qemu, so can only change the hardware
version string in qemu for it, then keep the original driver no touch (
qemu is for virtualization which has much easier life than real world).
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

File descriptors are always closed on exit :-)
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was initially sent by Lorenzo Colitti, but was subsequently
lost in the final diff he submitted.
Signed-off-by: NLoganaden Velvindron <logan@elandsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>