bitmap and its derivatives such as cpumask and nodemask currently only
provide formatting functions which put the output string into the
provided buffer; however, how long this buffer should be isn't defined
anywhere and given that some of these bitmaps can be too large to be
formatted into an on-stack buffer it users sometimes are unnecessarily
forced to come up with creative solutions and compromises for the
buffer just to printk these bitmaps.

There have been a couple different attempts at making this easier.

1. Way back, PeterZ tried printk '%pb' extension with the precision
   for bit width - '%.*pb'.  This was intuitive and made sense but
   unfortunately triggered a compile warning about using precision
   for a pointer.

   http://lkml.kernel.org/g/1336577562.2527.58.camel@twins

2. I implemented bitmap_pr_cont[_list]() and its wrappers for cpumask
   and nodemask.  This works but PeterZ pointed out that pr_cont's
   tendency to produce broken lines when multiple CPUs are printing is
   bothering considering the usages.

   http://lkml.kernel.org/g/1418226774-30215-3-git-send-email-tj@kernel.org

So, this patch is another attempt at teaching printk and friends how
to print bitmaps.  It's almost identical to what PeterZ tried with
precision but it uses the field width for the number of bits instead
of precision.  The format used is '%*pb[l]', with the optional
trailing 'l' specifying list format instead of hex masks.

This is a valid format string and doesn't trigger compiler warnings;
however, it does make it impossible to specify output field width when
printing bitmaps.  I think this is an acceptable trade-off given how
much easier it makes printing bitmaps and that we don't have any
in-kernel user which is using the field width specification.  If any
future user wants to use field width with a bitmap, it'd have to
format the bitmap into a string buffer and then print that buffer with
width spec, which isn't different from how it should be done now.

This patch implements bitmap[_list]_string() which are called from the
vsprintf pointer() formatting function.  The implementation is mostly
identical to bitmap_scn[list]printf() except that the output is
performed in the vsprintf way.  These functions handle formatting into
too small buffers and sprintf() family of functions report the correct
overrun output length.

bitmap_scn[list]printf() are now thin wrappers around scnprintf().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bitmap implements two variants of scnprintf functions to format a bitmap
into a string and cpumask and nodemask wrap them to provide equivalent
interfaces.  The scnprintf family of functions require a string buffer as
an output target which complicates code paths which just want to print out
the mask through printk for informational or debug purposes as they have
to worry about how large the buffer should be and whether it's too large
to allocate on stack.

Neither cpumask or nodemask provides a guildeline on how large the target
buffer should be forcing users come up with their own solutions - some
allocate an arbitrarily sized buffer which is small enough to allocate on
stack but may be too short in corner cases, other come up with a custom
upper limit calculation considering the output format, some allocate the
buffer dynamically while one resorted to using lock to synchronize access
to a static buffer.

This is an artificial problem which is being solved repeatedly for no
benefit.  In a lot of cases, the output area already exists and can be
targeted directly making the intermediate buffer unnecessary.  This
patchset teaches printf family of functions how to format bitmaps and
replace the dedicated formatting functions with it.

Pointer formatting is extended to cover bitmap formatting.  It uses the
field width for the number of bits instead of precision.  The format used
is '%*pb[l]', with the optional trailing 'l' specifying list format
instead of hex masks.  For more details, please see 0002.

This patch (of 31):

Currently, the formatting and parsing functions in cpumask.h use
nr_cpumask_bits like other cpumask functions; however, nr_cpumask_bits
is either NR_CPUS or nr_cpu_ids depending on CONFIG_CPUMASK_OFFSTACK.
This leads to inconsistent behaviors.

With CONFIG_NR_CPUS=512 and !CONFIG_CPUMASK_OFFSTACK

  # cat /sys/devices/virtual/net/lo/queues/rx-0/rps_cpus
  00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
  # cat /proc/self/status | grep Cpus_allowed:
  Cpus_allowed:   f

With CONFIG_NR_CPUS=1024 and CONFIG_CPUMASK_OFFSTACK (fedora default)

  # cat /sys/devices/virtual/net/lo/queues/rx-0/rps_cpus
  0
  # cat /proc/self/status | grep Cpus_allowed:
  Cpus_allowed:   f

Note that /proc/self/status is always using nr_cpu_ids regardless of
config.  This is because seq cpumask formattings functions always use
nr_cpu_ids.

Given that the same output fields may switch between the two forms,
converging on nr_cpu_ids always isn't too likely to surprise userland.
This patch updates the formatting and parsing functions in cpumask.h
to always use nr_cpu_ids.  There's no point in dealing with CPUs which
aren't even possible on the machine.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_gen_pool_create() calls devres_alloc() and dereferences its result
without checking whether devres_alloc() succeeded.  Check for error and
bail out if it happened.

Coverity-id 1016493.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of potentially passing over the string twice in case c is not
found, just keep track of the last occurrence.  According to
bloat-o-meter, this also cuts the generated code by a third (54 vs 36
bytes).  Oh, and we get rid of those 7-space indented lines.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VFS frequently performs duplication of strings located in read-only memory
section.  Replacing kstrdup by kstrdup_const allows to avoid such
operations.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

slab frequently performs duplication of strings located in read-only
memory section.  Replacing kstrdup by kstrdup_const allows to avoid such
operations.

[akpm@linux-foundation.org: make the handling of kmem_cache.name const-correct]
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clock subsystem frequently performs duplication of strings located in
read-only memory section.  Replacing kstrdup by kstrdup_const allows to
avoid such operations.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a new kernfs node is created, KERNFS_STATIC_NAME is used to avoid
making a separate copy of its name.  It's currently only used for sysfs
attributes whose filenames are required to stay accessible and unchanged.
There are rare exceptions where these names are allocated and formatted
dynamically but for the vast majority of cases they're consts in the
rodata section.

Now that kernfs is converted to use kstrdup_const() and kfree_const(),
there's little point in keeping KERNFS_STATIC_NAME around.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sysfs frequently performs duplication of strings located in read-only
memory section.  Replacing kstrdup by kstrdup_const allows to avoid such
operations.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kstrdup() is often used to duplicate strings where neither source neither
destination will be ever modified.  In such case we can just reuse the
source instead of duplicating it.  The problem is that we must be sure
that the source is non-modifiable and its life-time is long enough.

I suspect the good candidates for such strings are strings located in
kernel .rodata section, they cannot be modifed because the section is
read-only and their life-time is equal to kernel life-time.

This small patchset proposes alternative version of kstrdup -
kstrdup_const, which returns source string if it is located in .rodata
otherwise it fallbacks to kstrdup.  To verify if the source is in
.rodata function checks if the address is between sentinels
__start_rodata, __end_rodata.  I guess it should work with all
architectures.

The main patch is accompanied by four patches constifying kstrdup for
cases where situtation described above happens frequently.

I have tested the patchset on mobile platform (exynos4210-trats) and it
saves 3272 string allocations.  Since minimal allocation is 32 or 64
bytes depending on Kconfig options the patchset saves respectively about
100KB or 200KB of memory.

Stats from tested platform show that the main offender is sysfs:

By caller:
  2260 __kernfs_new_node
    631 clk_register+0xc8/0x1b8
    318 clk_register+0x34/0x1b8
      51 kmem_cache_create
      12 alloc_vfsmnt

By string (with count >= 5):
    883 power
    876 subsystem
    135 parameters
    132 device
     61 iommu_group
    ...

This patch (of 5):

Add an alternative version of kstrdup which returns pointer to constant
char array.  The function checks if input string is in persistent and
read-only memory section, if yes it returns the input string, otherwise it
fallbacks to kstrdup.

kstrdup_const is accompanied by kfree_const performing conditional memory
deallocation of the string.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8f243af4 ("sections: fix const sections for crc32 table")
removed the compile-time generated crc32 tables from the RO sections,
because it conflicts with the definition of __cacheline_aligned which
puts all such aligned data into .data..cacheline_aligned section
optimized for wasting less space, and can cause alignment issues when
used in combination with const with some gcc versions like 4.7.0 due to
a gcc bug [1].

Given that most gcc versions should have the fix by now, we can just use
____cacheline_aligned, which only aligns the data but doesn't move it
into specific sections as opposed to __cacheline_aligned.  In case of
gcc versions having the mentioned bug, the alignment attribute will have
no effect, but the data will still be made RO.

After patch tables are in RO:

  $ nm -v lib/crc32.o | grep -1 -E "crc32c?table"
  0000000000000000 t arch_local_irq_enable
  0000000000000000 r crc32ctable_le
  0000000000000000 t crc32_exit
  --
  0000000000000960 t test_buf
  0000000000002000 r crc32table_be
  0000000000004000 r crc32table_le
  000000001d1056e5 A __crc_crc32_be

  [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52181Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The first of these conditionals is completely redundant: If k == lim-1, we
must have off==0, so the second conditional will also trigger and then it
wouldn't matter if upper had some high bits set.  But the second
conditional is in fact also redundant, since it only serves to clear out
some high-order "don't care" bits of dst, about which no guarantee is
made.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can shift the bits from lower and upper into place before assembling
dst[k + off]; moving the shift of lower into the branch where we already
know that rem is non-zero allows us to remove a conditional.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc can generate slightly better code for stuff like "nbits %
BITS_PER_LONG" when it knows nbits is not negative.  Since negative size
bitmaps or shift amounts don't make sense, change these parameters of
bitmap_shift_right to unsigned.

If off >= lim (which requires shift >= nbits), k is initialized with a
large positive value, but since I've let k continue to be signed, the loop
will never run and dst will be zeroed as expected.  Inside the loop, k is
guaranteed to be non-negative, so the fact that it is promoted to unsigned
in the various expressions it appears in is harmless.

Also use "shift" and "nbits" consistently for the parameter names.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If left is 0, we can just let mask be ~0UL, so that anding with it is a
no-op.  Conveniently, BITMAP_LAST_WORD_MASK provides precisely what we
need, and we can eliminate left.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the condition k==lim-1 is true, we must have off == 0 (otherwise, k
could never become that big).  But in that case we have upper == 0 and
hence dst[k] == (src[k] & mask) >> rem.  Since mask consists of a
consecutive range of bits starting from the LSB, anding dst[k] with mask
is a no-op.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can shift the bits from lower and upper into place before assembling
dst[k]; moving the shift of upper into the branch where we already know
that rem is non-zero allows us to remove a conditional.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've previously changed the nbits parameter of most bitmap_* functions to
unsigned; now it is bitmap_shift_{left,right}'s turn.  This alone saves
some .text, but while at it I found that there were a few other things one
could do.  The end result of these seven patches is

  $ scripts/bloat-o-meter /tmp/bitmap.o.{old,new}
  add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-328 (-328)
  function                                     old     new   delta
  __bitmap_shift_right                         384     226    -158
  __bitmap_shift_left                          306     136    -170

and less importantly also a smaller stack footprint

  $ stack-o-meter.pl master bitmap
  file                 function                       old  new  delta
  lib/bitmap.o         __bitmap_shift_right             24    8  -16
  lib/bitmap.o         __bitmap_shift_left              24    0  -24

For each pair of 0 <= shift <= nbits <= 256 I've tested the end result
with a few randomly filled src buffers (including garbage beyond nbits),
in each case verifying that the shift {left,right}-most bits of dst are
zero and the remaining nbits-shift bits correspond to src, so I'm fairly
confident I didn't screw up.  That hasn't stopped me from being wrong
before, though.

This patch (of 7):

gcc can generate slightly better code for stuff like "nbits %
BITS_PER_LONG" when it knows nbits is not negative.  Since negative size
bitmaps or shift amounts don't make sense, change these parameters of
bitmap_shift_right to unsigned.

The expressions involving "lim - 1" are still ok, since if lim is 0 the
loop is never executed.

Also use "shift" and "nbits" consistently for the parameter names.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On little-endian, there's no reason to have an extra, presumably less
efficient, way of copying a bitmap.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the prototype of bitmap_copy_le the same as bitmap_copy's.  All other
bitmap_* functions take unsigned long* parameters; there's no reason this
should be special.

The only current user is the static inline uwb_mas_bm_copy_le, which
already does the void* laundering, so the end users can pass their u8 or
__le32 buffers without a cast.

Furthermore, this allows us to simply let bitmap_copy_le be an alias for
bitmap_copy on little-endian; see next patch.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull LED subsystem update from Bryan Wu:
 "The big change of LED subsystem is introducing a new LED class for
  Flash type LEDs which will be used for V4L2 subsystem.

  Also we got some cleanup and fixes"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-gpio: Pass on error codes unmodified
  DT: leds: Add led-sources property
  leds: Add LED Flash class extension to the LED subsystem
  leds: leds-mc13783: Use of_get_child_by_name() instead of refcount hack
  leds: Use setup_timer
  leds: Don't allow brightness values greater than max_brightness
  DT: leds: Add flash LED devices related properties

Pull module update from Rusty Russell:
 "Trivial cleanups, mainly"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Replace over-engineered nested sleep
  module: Annotate nested sleep in resolve_symbol()
  module: Remove double spaces in module verification taint message
  kernel/module.c: Free lock-classes if parse_args failed
  module: set ksymtab/kcrctab* section addresses to 0x0

Pull arch/tile changes from Chris Metcalf:
 "Not much in this batch, just some minor cleanups"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: change MAINTAINERS website from tilera.com to ezchip.com
  tile: enable sparse checks for get/put_user
  tile: fix put_user sparse errors
  tile: default to little endian on older toolchains

This reverts commit 5fcee53c.

It causes the suspend to fail on at least the Chromebook Pixel, possibly
other platforms too.

Joerg Roedel points out that the logic should probably have been

                if (max_physical_apicid > 255 ||
                    !(IS_ENABLED(CONFIG_HYPERVISOR_GUEST) &&
                      hypervisor_x2apic_available())) {

instead, but since the code is not in any fast-path, so we can just live
without that optimization and just revert to the original code.
Acked-by: NJoerg Roedel <joro@8bytes.org>
Acked-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...

Pull f2fs updates from Jaegeuk Kim:
 "Major changes are to:
   - add f2fs_io_tracer and F2FS_IOC_GETVERSION
   - fix wrong acl assignment from parent
   - fix accessing wrong data blocks
   - fix wrong condition check for f2fs_sync_fs
   - align start block address for direct_io
   - add and refactor the readahead flows of FS metadata
   - refactor atomic and volatile write policies

  But most of patches are for clean-ups and minor bug fixes.  Some of
  them refactor old code too"

* tag 'for-f2fs-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (64 commits)
  f2fs: use spinlock for segmap_lock instead of rwlock
  f2fs: fix accessing wrong indexed data blocks
  f2fs: avoid variable length array
  f2fs: fix sparse warnings
  f2fs: allocate data blocks in advance for f2fs_direct_IO
  f2fs: introduce macros to convert bytes and blocks in f2fs
  f2fs: call set_buffer_new for get_block
  f2fs: check node page contents all the time
  f2fs: avoid data offset overflow when lseeking huge file
  f2fs: fix to use highmem for pages of newly created directory
  f2fs: introduce a batched trim
  f2fs: merge {invalidate,release}page for meta/node/data pages
  f2fs: show the number of writeback pages in stat
  f2fs: keep PagePrivate during releasepage
  f2fs: should fail mount when trying to recover data on read-only dev
  f2fs: split UMOUNT and FASTBOOT flags
  f2fs: avoid write_checkpoint if f2fs is mounted readonly
  f2fs: support norecovery mount option
  f2fs: fix not to drop mount options when retrying fill_super
  f2fs: merge flags in struct f2fs_sb_info
  ...

Merge third set of updates from Andrew Morton:

 - the rest of MM

   [ This includes getting rid of the numa hinting bits, in favor of
     just generic protnone logic.  Yay.     - Linus ]

 - core kernel

 - procfs

 - some of lib/ (lots of lib/ material this time)

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (104 commits)
  lib/lcm.c: replace include
  lib/percpu_ida.c: remove redundant includes
  lib/strncpy_from_user.c: replace module.h include
  lib/stmp_device.c: replace module.h include
  lib/sort.c: move include inside #if 0
  lib/show_mem.c: remove redundant include
  lib/radix-tree.c: change to simpler include
  lib/plist.c: remove redundant include
  lib/nlattr.c: remove redundant include
  lib/kobject_uevent.c: remove redundant include
  lib/llist.c: remove redundant include
  lib/md5.c: simplify include
  lib/list_sort.c: rearrange includes
  lib/genalloc.c: remove redundant include
  lib/idr.c: remove redundant include
  lib/halfmd4.c: simplify includes
  lib/dynamic_queue_limits.c: simplify includes
  lib/sort.c: use simpler includes
  lib/interval_tree.c: simplify includes
  hexdump: make it return number of bytes placed in buffer
  ...

We don't need all the stuff kernel.h pulls in; just compiler.h since
export.h doesn't do necessary #includes.  This removes more than 100
dependencies.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These three #includes seem to be completely redundant: Removing them
yields identical objdump -d output for each of {allyes,allno,def}config,
and neither included file end up in the generated dependency file through
some recursive include.  In total, about 50 lines are eliminated from
.percpu.o.cmd.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

strncpy_from_user.c only needs EXPORT_SYMBOL, so just include compiler.h
and export.h instead of the whole module.h machinery.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

stmp_device.c only needs EXPORT_SYMBOL, so just include compiler.h and
export.h instead of the whole module.h machinery.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sort function and its helpers don't do memory allocation, so the
slab.h include is redundant.  Move it inside the #if 0 protecting the
self-test, similar to how it is done in lib/list_sort.c.  This removes
over 450 lines from the generated dependency file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

show_mem.c doesn't use anything from nmi.h.  Removing it yields identical
objdump -d output for each of {allyes,allno,def}config and eliminates more
than 100 lines in the dependency file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The comment helpfully explains why hardirq.h is included, but since
commit 2d4b8473 ("hardirq: Split preempt count mask definitions")
in_interrupt() has been provided by preempt_mask.h.  Use that instead,
saving around 40 lines in the generated dependency file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removing the include of linux/spinlock.h produces byte-identical output
for {allno,def}config, and identical objdump -d output for allyesconfig.
In the former two cases, more than a 100 lines are eliminated from the
generated dependency file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nlattr.c doesn't seem to rely on anything from netdevice.h.  Removing it
yields identical objdump -d output for each of {allyes,allno,def}config,
and eliminates more than 200 lines from the generated dependency file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The file doesn't seem to use anything from linux/user_namespace.h, and
removing it yields byte-identical object code and strictly fewer
dependencies in the .cmd file.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This file doesn't seem to use anything provided by linux/interrupt.h or
anything recursively included through that.  Removing it produces
byte-identical output, while reducing .llist.o.cmd from 541 to 156 lines.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

md5.c doesn't use anything from kernel.h, except that that pulls in
compiler.h, which is needed for the export.h to work.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>