Add a capability flag for drivers to set when they can perform multi-
block transfers to cards _and_ correctly report the number of bytes
transferred should an error occur.

The last point is very important - if a driver reports more bytes than
were actually accepted by the card and an error occurs, there is the
possibility for data loss.

Pierre Ossman provided the patch for wbsd and sdhci.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

data->blksz_bits is unused now - remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix G5 DART (IOMMU) race causing occasional data corruption
  [POWERPC] Fix MMIO ops to provide expected barrier behaviour
  [POWERPC] Fix interrupt clearing in kdump shutdown sequence
  [POWERPC] update prep_defconfig
  [POWERPC] kdump: Support kernels having 64k page size.
  [POWERPC] Implement PowerPC futex_atomic_cmpxchg_inatomic().
  [POWERPC] Add new, missing argument to of_irq_map_raw() for 86xx.
  [POWERPC] Update defconfigs

Add support for new hardware and bumps the version to 3.6.10.  It seems
there were several changes introduced including soft_irq.  I decided to
bump the major number to reflect these changes.  Since we're still
supporting older vendor kernels I need some way differentiate between
kernel versions <=2.6.10 and newer kernels >=2.6.16.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

MIPS asm/page.h unconditionally includes <asm-generic/memory_model.h>, which
doesn't exist in userspace.  Move an #endif /* __KERNEL__ */ down a few lines
to prevent that.

Also, remove the broken definition of PAGE_SIZE which is never going to be
correct -- in the absence of PAGE_SIZE, non-broken userspace will fall back to
using sysconf() or getpagesize() instead.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The header file <linux/pfn.h> doesn't exist in userspace and probably
shouldn't -- but it's used unconditionally in <asm-i386/setup.h>.  Protect it
with #ifdef __KERNEL__ and move setup.h from $(header-y) to $(unifdef-y) in
Kbuild accordingly.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some files which don't exist in userspace were being included unconditionally
in asm-i386/elf.h.  Move the offending #includes down a few lines so that
they're protected by #ifdef __KERNEL__

In fact, we probably want to kill off all userspace use of asm/elf.h -- but we
aren't there yet, so we should at least make it possible to include it for
now.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Because <linux/linkage.h> doesn't exist in userspace, it should be only
included from within #ifdef __KERNEL__.  Move the corresponding #include
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's useful stuff in <linux/timex.h> but <asm/timex.h> has nothing for
userspace.  Stop exporting it, and include it only from within the existing
#ifdef __KERNEL__ part of <linux/timex.h>

This fixes a 'make headers_check' failure on i386 because asm-i386/timex.h
includes both asm-i386/tsc.h and asm-i386/processor.h, neither of which are
exported to userspace.  It's not entirely clear _why_ it includes either of
these, but it does.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We don't need any of this crap included from the user-visible part of nfs_fs.h
-- remove it all.

In fact, we probably don't need anything but NFS_SUPER_MAGIC to be defined; is
there any need for anything else?  And magic numbers should probably move to
<linux/magic.h> rather than being strewn across various fs-specific include
files which exist in userspace for solely that purpose.

With this patch, 'make header_check' works again at least on PowerPC.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following combinations of pp-tokens are used

	#include
	 #include
	# include

so, script'd better check for all of them.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Claim an ID number for Xen in the LOADER_TYPE field.

Also, keep the table in zero-page.txt consistent with boot.txt.

[hpa says: 6 was skipped because I couldn't rule out that it hadn't been
 unofficially used.  It seemed easier to skip it for now.]
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

rcu_do_batch() decrements rdp->qlen with irqs enabled.  This is not good,
it can also be modified by call_rcu() from interrupt.

Decrement ->qlen once with irqs disabled, after a main loop.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixup for lockdep enabled kernels: Annotate an on-stack completion.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Configuration bits are not set properly for DMA on some chipset revisions.
It has already been corrected for M5229 (rev c7) but not for M5229 (rev
c8).  This leads to the bug described at
http://bugzilla.kernel.org/show_bug.cgi?id=5786 (lost interrupt + ide bus
hangs).
Signed-off-by: NMichael De Backer <micdb@skynet.be>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The DCO does not mean anything if we allow anonymous contributors to the
kernel.  As this is an open source project, we need to do everything in the
open.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Miles Lane reported the "BUG: MAX_STACK_TRACE_ENTRIES too low!" message,
which means that during normal use his system produced enough lockdep
events so that the 128-thousand entries stack-trace array got exhausted.
Double the size of the array.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

0x848a in ID word 0 indicates CFA device iff the ID data is obtained from
IDENTIFY DEVICE.  For ATAPI devices, 0x848a in ID work 0 indicates valid
ATAPI device.  Fix sanity check in ata_dev_read_id() such that ATAPI
devices reporting 0x848a in ID word 0 is not handled as error.

The problem is identified by J.A.  Magallon with HL-DT-ST DVDRAM GSA-4120B.
Signed-off-by: NTejun Helo <htejun@gmail.com>
Cc: J.A. Magallon <jamagallon@ono.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It seems that the occasional data corruption observed with the tg3
driver wasn't due to missing barriers after all, but rather seems to
be due to the DART (= IOMMU) in the U4 northbridge reading stale
IOMMU table entries from memory due to a race.  This fixes it by
making the CPU read the entry back from memory before using it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This changes the writeX family of functions to have a sync instruction
before the MMIO store rather than after, because the generally expected
behaviour is that the device receiving the MMIO store can be guaranteed
to see the effects of any preceding writes to normal memory.

To preserve ordering between writeX and readX, and to preserve ordering
between preceding stores and the readX, the readX family of functions
have had an sync added before the load.

Although writeX followed by spin_unlock is not officially guaranteed
to keep the writeX inside the spin-locked region unless an mmiowb()
is used, there are currently drivers that depend on the previous
behaviour on powerpc, which was that the mmiowb wasn't actually required.
Therefore we have a per-cpu flag that is set by writeX, cleared by
__raw_spin_lock and mmiowb, and tested by __raw_spin_unlock.  If it is
set, __raw_spin_unlock does a sync and clears it.

This changes both 32-bit and 64-bit readX/writeX.  32-bit already has a
sync in __raw_spin_unlock (since lwsync doesn't exist on 32-bit), and thus
doesn't need the per-cpu flag.

Tested on G5 (PPC970) and POWER5.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Call chip->eoi(irq) to clear any pending interrupt in case of kdump
shutdown sequence.  chip->end(irq) does not serve this purpose.
Signed-off-by: NMohan Kumar M <mohan@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Update PReP defconfig, disable some drivers for hardware that is not
used on those systems; enable SL82C105 IDE driver for Powerstack.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This is required to generate proper core files using kdump on ppc64.

Create a backup region of 64K size irrespective of the PAGE SIZE.
At present 32K was used as backup size. In the case of 64K page size,
second PT_LOAD segments starts at 32K and the first one is not page
aligned.  __ioremap() (crash_dump.c) fails if pfn = 0 which is the
case for the second PT_LOAD segment. This is not an issue for 4K page
size because the the first page (32K backup) is copied to second
kernel memory and thus referencing with the second kernel pfn.
Signed-off-by: NSachin Sant <sachinp@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The sys_[gs]et_robust_list() syscalls were wired up on PowerPC but
didn't work correctly because futex_atomic_cmpxchg_inatomic() wasn't
implemented.  Implement it, based on __cmpxchg_u32().
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Ben speaks; we follow.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

One last time..

* 'audit.b29' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] sparc64 audit syscall classes hookup
  [PATCH] syscall class hookup for all normal targets

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix CIFS readdir access denied when SE Linux enabled

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4608c): Fix I2C dependencies for saa7146 modules
  V4L/DVB (4608b): i2c deps fix on DVB
  V4L/DVB (4605): Fixes an issue with V4L1 and make headers-install
  V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.
  V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF switch functionality
  V4L/DVB (4494a): Fix compilation when V4L1 support is not present

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Fix unload oops and memory leak in yealink driver
  usbserial: Reference leak

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Add a sane pm_power_off implementation.
  sh64: Use generic BUG_ON()/WARN_ON().
  sh64: Trivial build fixes.
  sh64: Drop deprecated ISA tuning for legacy toolchains.

* git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix a bad pointer dereference in the quota statvfs handling.
  [XFS] Fix xfs_splice_write() so appended data gets to disk.
  [XFS] Fix ABBA deadlock between i_mutex and iolock. Avoid calling
  [XFS] Prevent free space oversubscription and xfssyncd looping.

This patch fixes a memory leak and a kernel oops when trying to unload
the driver, due to an unbalanced cleanup.
Thanks Ivar Jensen for spotting my mistake.
Signed-off-by: NHenk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A sufficiently-large number of USB serial devices causes a reference leak
when /proc/tty/drivers/usbserial is read.
Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

... that should do it for all targets; the only remaining issues are
mips (currently treated as non-biarch) and handling of other OS
emulations (OSF/SunOS/Solaris/???).  The latter would need to be
assigned new AUDIT_ARCH_... ABI numbers anyway...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Take default arch/*/kernel/audit.c to lib/, have those with special
needs (== biarch) define AUDIT_ARCH in their Kconfig.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

sh64 wasn't providing a sensible pm_power_off(), add one,
and just wrap it to machine_power_off, which already does
the right thing.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

sh64 doesn't need to do anything special for BUG_ON() or
WARN_ON(), use the generic versions.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>