Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.

 - spread out the quirks into separately named per apic driver methods

 - prefix the standard PC methods with default_

 - get rid of wrapper macro obfuscation

 - clean up various details
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - clean up the functions

 - get rid of macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Remove the *_APIC_ID_MASK subarch definitions and move them straight
to the genapic driver initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of wrapper macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of macro wrappers

 - small cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the mps_oem_check() namespace on a per APIC driver basis
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Refactor the ->phys_pkg_id() methods:

 - namespace separation

 - macro wrapper removal

 - open-coded calls to the methods in the generic code
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only ES7000 has a real ->enable_apic_mode() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace to per driver methods

 - extend it to 64-bit as well so that we can use
   apic->check_phys_apicid_present() unconditionally
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Also move the NUMAQ method from the header file into the
 apic driver .c file.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.

All other genapic templates can have a NULL ->multi_timer_check()
callback.

Also, extend the generic code to treat a NULL pointer accordingly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - move the default vector-allocation-domain to mach-generic

 - fix whitespace damage
Signed-off-by: NIngo Molnar <mingo@elte.hu>

These flags are completely unused. (the in-kernel IRQ balancer has
been removed from the upstream kernel.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up these methods - to make it clearer which function is
used in which case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This field name was unreasonably long - shorten it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the ->ESR_DISABLE shouting variant was used to enable the esr_disable
macro wrappers. Those ugly macros are removed now so we can rename
->ESR_DISABLE to ->disable_esr
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Most subarchitectures want to disable the APIC ESR (Error Status Register),
because they generally have hardware hacks that wrap standard CPUs into
a bigger system and hence the APIC bus is quite non-standard and weirdnesses
(lockups) have been seen with ESR reporting.

Remove the esr_disable macros and put the desired flag into each
subarchitecture's genapic template directly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Clean up all the target_cpus() namespace overlap that exists
between bigsmp, es7000, mach-default, numaq and summit - by
separating the different functions into different names.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

They were only used in a single place and obscured the apic_summit template.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.

The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.

Furthermore, it also obscures subarchitecture details.

So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...

The standard naming for such attributes is 'irq' - so rename the following
fields and macros:

 int_delivery_mode => irq_delivery_mode
 INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
 int_dest_mode     => irq_dest_mode
 INT_DEST_MODE     => IRQ_DEST_MODE
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.

Untangle this namespace spaghetti by giving each of the instances
a separate name.

Also remove wrapper macro obfuscation.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: refactor code

x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.

Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.

Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

Impact: fix secondary-CPU wakeup/init path with numaq and es7000

While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI:

|#ifdef WAKE_SECONDARY_VIA_NMI
|/*
| * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
| * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
| * won't ... remember to clear down the APIC, etc later.
| */
|static int __devinit
|wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
|{
|        unsigned long send_status, accept_status = 0;
|        int maxlvt;
|...
|        if (APIC_INTEGRATED(apic_version[phys_apicid])) {
|                maxlvt = lapic_get_maxlvt();

I noticed that there is no warning about undefined phys_apicid...

because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be
defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu.

WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and
WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile
preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU
wakeup strategy a given x86 kernel will use.

The vast majority of systems want to use INIT for secondary wakeup - NUMAQ
uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory
flag to let secondaries continue).

So convert these mechanisms to x86_quirks and add a
->wakeup_secondary_cpu() method to specify the rare exception
to the sane default.

Extend genapic accordingly as well, for 32-bit.

While looking further, I noticed that functions in wakecup.h for numaq
and es7000 are different to the default in mach_wakecpu.h - but smpboot.c
will only use default mach_wakecpu.h with smphook.h.

So we need to add mach_wakecpu.h for mach_generic, to properly support
numaq and es7000, and vectorize the following SMP init methods:

	int trampoline_phys_low;
	int trampoline_phys_high;
	void (*wait_for_init_deassert)(atomic_t *deassert);
	void (*smp_callin_clear_local_apic)(void);
	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*inquire_remote_apic)(int apicid);
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

so we can merge io_apic_32.c and io_apic_64.c

v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing.

Also remove some unused TARGET_CPUS macro.

v3: need to check if desc is null in smp_irq_move_cleanup

also migration needs to reset vector too, so copy __target_IO_APIC_irq
from 64bit.

(the duplication will go away once the two files are unified.)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

smp.h internal has include, so need to include that at first
when genericarch use them need to have different apicdef.h
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

File is now error/warning free.

arch/x86/mach-generic/summit.o:
   text    data     bss     dec     hex filename
   1481     140       0    1621     655 summit.o.before
   1481     140       0    1621     655 summit.o.after
md5:
 7b7dc1cbd381af7b9393da989da5b0fd  summit.o.before.asm
 7b7dc1cbd381af7b9393da989da5b0fd  summit.o.after.asm
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

o struct genapic contains pointer to probe() function which is of type
  __init. Hence MODPOST generates warning if kernel is compiled with
  CONFIG_RELOCATABLE=y for i386.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_summit' (at offset 0xc058b504) and 'apic_bigsmp'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_bigsmp' (at offset 0xc058b5a4) and 'cpu.4471'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_es7000' (at offset 0xc058b644) and 'apic_default'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_default' (at offset 0xc058b6e4) and 'interrupt'

o One of the possible options is to put special case check in MODPOST to
  not emit warnings for this case but I think it is not a very good option
  in terms of maintenance.

o Another option is to make probe() function non __init. Anyway this function
  is really small so not freeing this memory after init is not a big deal.
  Secondly, from a programming perspective, probably genapic should not
  provide pointers to functions which have been freed as genapic is non
  __init and is used even after initialization is complete.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

There are some machines around (large xSeries or Unisys ES7000) that
need physical IO-APIC destination mode to access all of their IO
devices. This currently doesn't work in UP kernels as used in
distribution installers.

This patch allows to compile even UP kernels as GENERICARCH which
allows to use physical or clustered APIC mode.
Signed-off-by: NAndi Kleen <ak@suse.de>