- 12 6月, 2009 1 次提交
-
-
由 Michał Mirosław 提交于
This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2008 1 次提交
-
-
由 Franck Bui-Huu 提交于
Move rcu-protected lists from list.h into a new header file rculist.h. This is done because list are a very used primitive structure all over the kernel and it's currently impossible to include other header files in this list.h without creating some circular dependencies. For example, list.h implements rcu-protected list and uses rcu_dereference() without including rcupdate.h. It actually compiles because users of rcu_dereference() are macros. Others RCU functions could be used too but aren't probably because of this. Therefore this patch creates rculist.h which includes rcupdates without to many changes/troubles. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NJosh Triplett <josh@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 5月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
The forwarding table binary interface (my bad choice), only exposes the port number of the first 8 bits. The bridge code was limited to 256 ports at the time, but now the kernel supports up 1024 ports, so the upper bits are lost when doing: brctl showmacs The fix is to squeeze the extra bits into small hole left in data structure, to maintain binary compatiablity. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2008 1 次提交
-
-
由 Fabio Checconi 提交于
In br_fdb_cleanup() next_timer and this_timer are in jiffies, so they should be compared using the time_after() macro. Signed-off-by: NFabio Checconi <fabio@gandalf.sssup.it> Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
WARNING: vmlinux.o(.init.text+0x204e2): Section mismatch: reference to .exit.text:br_fdb_fini (between 'br_init' and 'br_fdb_init') Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
This patch fixes some packet leakage in bridge. The bridging code was allowing forward table entries to be generated even if a device was being blocked. The fix is to not add forwarding database entries unless the port is active. The bug arose as part of the conversion to processing STP frames through normal receive path (in 2.6.17). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Acked-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 31 5月, 2007 1 次提交
-
-
由 Baruch Even 提交于
The bridge cleanup timer is fired 10 times a second for timers that are at least 15 seconds ahead in time and that are not critical to be cleaned asap. This patch calculates the next time to run the timer as the minimum of all timers or a minimum based on the current state. Signed-off-by: NBaruch Even <baruch@ev-en.org> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 3 次提交
-
-
由 Akinobu Mita 提交于
This patch checks kmem_cache_create() error and aborts loading module on failure. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
The RSTP daemon needs to be able to flush all dynamic forwarding entries in the case of topology change. This is a temporary interface. It will change to a netlink interface before RSTP daemon is officially released. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Instead of hashing the whole Ethernet address, it should be faster to just use the last 4 bytes. Add a random salt value to the hash to make it more difficult to construct worst case DoS hash chains. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
- 23 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
br_fdb_get use atomic_inc to increase the refcount of an element found on a RCU protected list, which can lead to the following race: CPU0 CPU1 br_fdb_get: rcu_read_lock __br_fdb_get: find element fdb_delete: hlist_del_rcu br_fdb_put br_fdb_put: atomic_dec_and_test call_rcu(fdb_rcu_free) br_fdb_get: atomic_inc rcu_read_unlock fdb_rcu_free: kmem_cache_free Use atomic_inc_not_zero instead. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2006 1 次提交
-
-
由 Christoph Lameter 提交于
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 10月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
Flush the forwarding table when carrier is lost. This helps for availability because we don't want to forward to a downed device and new packets may come in on other links. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
Optimize the forwarding and transmit paths. Both places are called with bottom half/no preempt so there is no need to use spin_lock_bh or rcu_read_lock. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2005 1 次提交
-
-
由 Stephen Hemminger 提交于
Use compare_ether_addr in bridge code. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 30 8月, 2005 1 次提交
-
-
由 Eric Dumazet 提交于
This patch puts mostly read only data in the right section (read_mostly), to help sharing of these data between CPUS without memory ping pongs. On one of my production machine, tcp_statistics was sitting in a heavily modified cache line, so *every* SNMP update had to force a reload. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-