There's already a device revision stored in the core data structure,
don't duplicate it in the CODEC driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This helps to ensure a smooth startup when we restore.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some systems use the audio CODEC to clock a DAI with multiple data lines
in parallel, meaning that bit clocks are only required for a smaller number
of channels than data is sent for. In some cases providing the extra bit
clocks can take the other devices on the audio bus out of spec.

Support such systems by allowing a maximum number of channels to be
specified.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Evaluation has identified some performance improvements to the device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The delay parameter of schedule_delayed_work() is number of jiffies to wait
rather than miliseconds.

Before commit 6d3c26bc "ASoC: Use delayed work to debounce WM8350 jack IRQs",
the debounce time is 200 miliseconds in wm8350_hp_jack_handler().
So I think this is a bug when convert to use delayed work.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for the Dialog DA7213 audio codec.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For optimal performance the inputs should be kept muted until after power
up. Since there are few use cases for muting inputs during capture move
the mutes to automatic control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix these two compile errors on s390 which does not have HAS_IOPORT
nor GENERIC_HARDIRQS:

sound/pci/lx6464es/lx6464es.c: In function ‘snd_lx6464es_free’:
sound/pci/lx6464es/lx6464es.c:565:2: error: implicit declaration of function ‘ioport_unmap’

sound/soc/codecs/wm8903.c: In function ‘wm8903_set_pdata_irq_trigger’:
sound/soc/codecs/wm8903.c:1954:9: error: implicit declaration of function ‘irq_get_irq_data’
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch completes the replacement of the existing max98090 driver,
by installing a more complete driver.
Signed-off-by: NJerry Wong <jerry.wong@maximintegrated.com>
Tested-by: NMatthew Mowdy <matthew.mowdy@maximintegrated.com>
Reviewed-by: NRalph Birt <ralph.birt@maximintegrated.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch removes the existing max98090 driver prior to installing a more
complete one.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use _dbg for debug messages.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow the regmap API to use asynchronous I/O where supported to minimise
the delay between transfers, reducing firmware download times.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Convert MicBias widgets to supply widget.

On tlv320aic3x, Mic bias power on/off shares the same register bits
with output mic bias voltage.  So, when power on mic bias, we need
reclaim it to voltage value.

Provide a new platform data so that the micbias voltage can be sent
according to board requirement. Now since tlv320aic3x codec driver
is DT aware, update dt files and functions to handle this new
"micbias-vg"  platform data.

Because of sharing of bits, when enabling the micbias, voltage also
needs to be updated. So use SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD
macro to create an event to handle this.

Since micbias is converted to supply widget, updated machine drivers as
well.

This change is runtime tested on da850-evm with audio loopback
(arecord|aplay) for confirmation.
Signed-off-by: NHebbar Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Previously arizona_calc_fll() was checking if the target frequency is
exactly divisible by reference frequency, but should have been product
of the ratio and the reference frequency.

Also scale down the Lamba and Theta coefficients be under 16-bits in
order to match the registers.
Signed-off-by: NRyo Tsutsui <ryo.tsutsui@wolfsonmicro.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

No TLV information since it's not actually a direct gain control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Need to ensure we don't get confused by simultaneous updates.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Playing a mono stream on the TLV320AIC3x results in too fast playback rate.

Remove mono support so that mono streams can be played correctly on this codec.

Tested with imx-ssi (i.MX25) and TLV320AIC3104.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Maximise robustness for the widest range of firmwares by ensuring the DSP
is in a consistent state when halted.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allows ADSP control code to set the dsp clock rate to match the
sys clock rate.
Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch correctly releases the firmware if the magic string in the
firmware header does not match.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch correctly releases the firmware if the magic string in the
firmware header does not match.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Place a cap on the number of channels clocks are generated for. This is
intended for use with systems which have the WM5102 master an I2S bus with
multiple data lines.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Helpful for debugging.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some systems may wish to support switching between telephony and CD audio
clock rates but this is restricted by enforcement of constraints on the
current DAI clock. Support setting clocks to zero and don't enforce any
constraints in that case in order to facilitate this use case.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Normally kmalloc() returns things that are DMA safe so not visible on all
platforms but we do need to explicitly request DMA safe memory.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Normally kmalloc() returns things that are DMA safe so not visible on all
platforms but we do need to explicitly request DMA safe memory.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>