Add the three bare TLB accessor functions to paravirt-ops.  Most amusingly,
flush_tlb is redefined on SMP, so I can't call the paravirt op flush_tlb.
Instead, I chose to indicate the actual flush type, kernel (global) vs. user
(non-global).  Global in this sense means using the global bit in the page
table entry, which makes TLB entries persistent across CR3 reloads, not
global as in the SMP sense of invoking remote shootdowns, so the term is
confusingly overloaded.

AK: folded in fix from Zach for PAE compilation
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Add APIC accessors to paravirt-ops.  Unfortunately, we need two write
functions, as some older broken hardware requires workarounds for
Pentium APIC errata - this is the purpose of apic_write_atomic.

AK: replaced __inline with inline
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Two legacy power management modes are much easier to just explicitly disable
when running in paravirtualized mode - neither APM nor PnP is still relevant.
The status of ACPI is still debatable, and noacpi is still a common enough
boot parameter that it is not necessary to explicitly disable ACPI.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

They don't work together and this way even glibc still works.
Signed-off-by: NAndi Kleen <ak@suse.de>

Allow selected bug checks to be skipped by paravirt kernels.  The two most
important are the F00F workaround (which is either done by the hypervisor,
or not required), and the 'hlt' instruction check, which can break under
some hypervisors.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

1) Each hypervisor writes a probe function to detect whether we are
   running under that hypervisor.  paravirt_probe() registers this
   function.

2) If vmlinux is booted with ring != 0, we call all the probe
   functions (with registers except %esp intact) in link order: the
   winner will not return.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Both lhype and Xen want to call the core of the x86 cpu detect code before
calling start_kernel.

(extracted from larger patch)

AK: folded in start_kernel header patch
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

It turns out that the most called ops, by several orders of magnitude,
are the interrupt manipulation ops.  These are obvious candidates for
patching, so mark them up and create infrastructure for it.

The method used is that the ops structure has a patch function, which
is called for each place which needs to be patched: this returns a
number of instructions (the rest are NOP-padded).

Usually we can spare a register (%eax) for the binary patched code to
use, but in a couple of critical places in entry.S we can't: we make
the clobbers explicit at the call site, and manually clobber the
allowed registers in debug mode as an extra check.

And:

Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT.

And:

AK:  Fix warnings in x86-64 alternative.c build

And:

AK: Fix compilation with defconfig

And:

^From: Andrew Morton <akpm@osdl.org>

Some binutlises still like to emit references to __stop_parainstructions and
__start_parainstructions.

And:

AK: Fix warnings about unused variables when PARAVIRT is disabled.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Create a paravirt.h header for all the critical operations which need to be
replaced with hypervisor calls, and include that instead of defining native
operations, when CONFIG_PARAVIRT.

This patch does the dumbest possible replacement of paravirtualized
instructions: calls through a "paravirt_ops" structure.  Currently these are
function implementations of native hardware: hypervisors will override the ops
structure with their own variants.

All the pv-ops functions are declared "fastcall" so that a specific
register-based ABI is used, to make inlining assember easier.

And:

+From: Andy Whitcroft <apw@shadowen.org>

The paravirt ops introduce a 'weak' attribute onto memory_setup().
Code ordering leads to the following warnings on x86:

    arch/i386/kernel/setup.c:651: warning: weak declaration of
                `memory_setup' after first use results in unspecified behavior

Move memory_setup() to avoid this.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>

Fix double #includes in arch/i386
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NAndi Kleen <ak@suse.de>

Substitutes allocate_pgdat virtual address lookup with pfn_to_kaddr macro.
Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

It's two big and used by two callers. Calls should be cheap enough anyways.
Signed-off-by: NAndi Kleen <ak@suse.de>

IOPL is implicitly saved and restored on task switch,
so explicit check is no longer needed.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Interrupt could happen between setting the IO-APIC entry
and setting its interrupt data.

Pointed out by Linus.
Signed-off-by: NAndi Kleen <ak@suse.de>

Interrupt could happen between setting the IO-APIC entry
and setting its interrupt data.

Pointed out by Linus.
Signed-off-by: NAndi Kleen <ak@suse.de>

Port two patches from i386 to x86_64 delay.c to make sure all rounding is done
upward instead of downward.

There is no sign in commit messages that the mismatch was done on purpose, and
"delay() guarantees sleeping at least for the specified time" is still a valid
rule IMHO.

The original x86 patches are both from pre-GIT era, i.e.:

"[PATCH] round up  in __udelay()" in commit
54c7e1f5cc6771ff644d7bc21a2b829308bd126f

"[PATCH] add 1 in __const_udelay()" in commit
42c77a9801b8877d8b90f65f75db758822a0bccc

(both commits are from converted BK repository to x86_64).

AK: fixed gcc warning

linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift
(did this actually work?)
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch makes it possible to compile Calgary in but not use it by
default. In this mode, use 'iommu=calgary' to activate it.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch cleans up the previous "Use BIOS supplied BBAR information"
patch. Mostly stylistic clenaups, but also check for ioremap failure
when we ioremap the BBAR rather than when trying to use it.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NLaurent Vivier <Laurent.Vivier@bull.net>

Find the BBAR register address of each Calgary using the "Extended
BIOS Data Area" rather than calculating it ourselves. Also get the bus
topology (what PHB each bus is on) from Calgary rather than
calculating it ourselves.

This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=7407.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch moves e820 memory map print and memmap boot param
parsing function from setup.c to e820.c, also adds limit_regions
and print_memory_map declaration in header file.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 arch/i386/kernel/e820.c  |  152 +++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  158 ---------------------------------
 include/asm-i386/e820.h  |    2
 arch/i386/kernel/e820.c  |  152 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  153 -----------------------------------------------
 include/asm-i386/e820.h  |    2
 3 files changed, 155 insertions(+), 152 deletions(-)

This patch moves e820/efi memmap table walking function from
setup.c to e820.c, also this patch adds extern declaration in
header file.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 arch/i386/kernel/e820.c  |  115 +++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  118 -----------------------------------
 include/asm-i386/e820.h  |    2
 arch/i386/kernel/e820.c  |  115 +++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  118 -----------------------------------------------
 include/asm-i386/e820.h  |    2
 3 files changed, 117 insertions(+), 118 deletions(-)

Move more code from setup.c into e820.c
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch moves bios e820 map sanitize and copy function from
setup.c to e820.c
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 arch/i386/kernel/e820.c  |  252 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  240 --------------------------------------------
 2 files changed, 252 insertions(+), 240 deletions(-)

This patch creates new file named e820.c to hanle standard io/mem
resources, moving request_standard_resources function from setup.c
to e820.c. Also this patch modifies Makfile to compile file e820.c.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 Makefile |    2
 arch/i386/kernel/Makefile |    2
 arch/i386/kernel/e820.c   |  289 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c  |  276 -------------------------------------------
 3 files changed, 293 insertions(+), 274 deletions(-)

The recent change to make x86_64 support i386 binaries compiled
with -mregparm=3 only covered signal handlers without SA_SIGINFO.
(the 3-arg "real-time" ones)

To be compatible with i386, both types should be supported.
Signed-off-by: NAlbert Cahalan <acahalan@gmail.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Instead of adding all kinds of more quirks try various timer
routing variants in check_timer.

In particular this tries to handle quirks from:
- Nvidia NF2-4 reference BIOS: wrong timer override
- Asus: Wrong timer override but no HPET table
- ATI: require timer disabled in 8259
- Some boards: require timer enabled in 8259

We just try many of the the known variants in the hopefully right order
in check_timer.

Trying pin 0/2 on Nvidia suggested by Tim Hockin.

TBD Experimental. Needs a lot of testing
Signed-off-by: NAndi Kleen <ak@suse.de>

Makes the intention of the code cleaner to read and avoids
a potential deadlock on mmap_sem. Also change the types of
the arguments to not include __user because they're really
not user addresses.
Signed-off-by: NAndi Kleen <ak@suse.de>

Instead of open coded __get_user
Signed-off-by: NAndi Kleen <ak@suse.de>

Clear the irq releated entries in irq_vector, irq_domain and vector_irq
instead of clearing irq_vector only. So when new irq is created, it
could reuse that vector. (actually is the second loop scanning from
FIRST_DEVICE_VECTOR+8). This could avoid the vectors are used up
with enough module inserting and removing

Cc: Eric W. Biedierman <ebiederm@xmission.com>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-By: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

CLFLUSH is a lot faster than WBINVD so try to use that.
Signed-off-by: NAndi Kleen <ak@suse.de>

Also report it in /proc/cpuinfo similar to x86-64.

Needed for followon patch
Signed-off-by: NAndi Kleen <ak@suse.de>

CLFLUSH is a lot faster than WBINVD so avoid the later if at all
possible.

Always pass the complete list of pages to other CPUs to cut down
the number of IPIs.

Minor other cleanup and sync with i386 version.
Signed-off-by: NAndi Kleen <ak@suse.de>

The entry.S code at work_notifysig is surely wrong.  It drops into unrelated
code if the branch to work_notifysig_v86 is taken, and CONFIG_VM86=n.

	[PATCH] Make vm86 support optional
	tree 9b5daef5280800a0006343a17f63072658d91a1d
	pushed to git Jan 8, 2006, and first appears in 2.6.16

The 'fix' here is to also compile out the vm86 test & branch when
CONFIG_VM86=n.
Signed-off-by: NJoe Korty <joe.korty@ccur.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Extend bzImage protocol to enable bootloaders to load a completely relocatable
bzImage.  Now protected mode component of kernel is also relocatable and a
boot-loader can load the protected mode component at a differnt physical
address than 1MB.  (If kernel was built with CONFIG_RELOCATABLE)

Kexec can make use of it to load this kernel at a different physical address
to capture kernel crash dumps.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

o Now CONFIG_PHYSICAL_START is being replaced with CONFIG_PHYSICAL_ALIGN.
  Hardcoding the kernel physical start value creates a problem in relocatable
  kernel context due to boot loader limitations. For ex, if somebody
  compiles a relocatable kernel to be run from address 4MB, but this kernel
  will run from location 1MB as grub loads the kernel at physical address
  1MB. Kernel thinks that I am a relocatable kernel and I should run from
  the address I have been loaded at. So somebody wanting to run kernel
  from 4MB alignment location (for improved performance regions) can't do
  that.

o Hence, Eric proposed that probably CONFIG_PHYSICAL_ALIGN will make
  more sense in relocatable kernel context. At run time kernel will move
  itself to a physical addr location which meets user specified alignment
  restrictions.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

o Relocations generated w.r.t absolute symbols are not processed as by
  definition, absolute symbols are not to be relocated. Explicitly warn
  user about absolutions relocations present at compile time.

o These relocations get introduced either due to linker optimizations or
  some programming oversights.

o Also create a list of symbols which have been audited to be safe and
  don't emit warnings for these.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch modifies the i386 kernel so that if CONFIG_RELOCATABLE is
selected it will be able to be loaded at any 4K aligned address below
1G.  The technique used is to compile the decompressor with -fPIC and
modify it so the decompressor is fully relocatable.  For the main
kernel relocations are generated.  Resulting in a kernel that is relocatable
with no runtime overhead and no need to modify the source code.

A reserved 32bit word in the parameters has been assigned
to serve as a stack so we figure out where are running.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Print the addresses of non-absolute symbols relative to _text
so that ld will generate relocations.  Allowing a relocatable
kernel to relocate them.  We can't actually use the symbol names
because kallsyms includes static symbols that are not exported
from their object files.

Add the _text symbol definitions to the architectures which don't
define it otherwise linker will fail.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>