The bitmap was changed after this definition was added to the
driver. Correcting the bitmap definition.
Reviewed-by: NMahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Reviewed-by: NJustin Lindley <justin.lindley@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Adding a new method to display enclosure device information.
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When external target arrays are present, disable the firmware's
normal behavior of returning a cached copy of the report lun data,
and force it to collect new data each time we request a report luns.

This is necessary for external arrays, since there may be no
reliable signal from the external array to the smart array when
lun configuration changes, and thus when driver requests
report luns, it may be stale data.

Use diag options to turn off RPL data caching.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

External array LUNs must use target and lun numbers assigned by the
external array. So the driver must treat these differently from
local LUNs when assigning lun/target.

LUN's 'model' field has been used to detect Lun types that need
special treatment, but the desire is to eliminate the need to reference
specific array models, and support any external array.

Pass-through RAID (PTRAID) luns are not luns of the local controller,
so they are not reported in LUN count of command 'ID controller'.
However, they ARE reported in "Report logical Luns" command.
Local luns are listed first, then PTRAID LUNs.

The number of luns from "Report LUNs" in excess of those reported by
'ID controller' are therefore the PTRAID LUNS.

We can now remove function is_ext_target, and the 'white list'
array of supported model names.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver is using two MACROs which seemingly are looking in
the wrong location for the device_flags returned from
CISS_REPORT_PHYS. Both MACROs, NON_DISK_PHYS_DEV and
PHYS_IOACCEL, are using the pointer returned from figure_lunaddrbytes
which is the address of the LUN.lunid element in
the extended CISS_REPORT_PHYS.  But the MACROS are using offsets
beyond the range of the element (offset 17 of an 8 byte element).

These MACROs actually are looking at the correct location but
they fail static checker analysis. It also will not work
if any new elements are added to the extended LUN structure.

Change the code to use the structure elements directly
since this MACRO is only used in one location.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

prevent adding volumes that are not available.
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

need to add PMC to copyright notice and update the Hewlett-Packard
copyright notification.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NJustin Lindley <justin.lindley@pmcs.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Synchronize completion the reset with completion of outstanding commands

Extending the newly-added synchronous abort functionality,
now also synchronize resets with the completion of outstanding commands.
Rename the wait queue to reflect the fact that it's being used for both
types of waits.  Also, don't complete commands which are terminated
due to a reset operation.

fix for controller lockup during reset
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Don't return from the abort request until the target command is complete.
Mark outstanding commands which have a pending abort, and do not send them
to the host if we can avoid it.

If the current command has been aborted, do not call the SCSI command
completion routine from the I/O path: when the abort returns successfully,
the SCSI mid-layer will handle the completion implicitly.

The following race was possible in theory.

1. LLD is requested to abort a scsi command
2. scsi command completes
3. The struct CommandList associated with 2 is made available.
4. new io request to LLD to another LUN re-uses struct CommandList
5. abort handler follows scsi_cmnd->host_scribble and
   finds struct CommandList and tries to aborts it.

Now we have aborted the wrong command.

Fix by resetting the scsi_cmd field of struct CommandList
upon completion and making the abort handler check that
the scsi_cmd pointer in the CommadList struct matches the
scsi_cmnd that it has been asked to abort.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

add support for tmf when in ioaccel2 mode
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

improve ioaccel2 error handling, including better handling of
underrun statuses
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Factor out hpsa_cmd_init from cmd_alloc().  We also need
this for resubmitting commands down the default RAID path
when they have returned from the ioaccel paths with errors.

In particular, reinitialize the cmd_type and busaddr fields as these
will not be correct for submitting down the RAID stack path
after ioaccel command completion.

This saves time when submitting commands.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

In hba mode, we could get sense data in descriptor format so
we need to handle that.

It's possible for CommandStatus to have value 0x0D
"TMF Function Status", which we should handle.  We will get
this from a P1224 when aborting a non-existent tag, for
example.  The "ScsiStatus" field of the errinfo field
will contain the TMF function status value.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Allow driver initiated commands to have a timeout.  It does not
yet try to do anything with timeouts on such commands.

We are sending a reset in order to get rid of a command we want to abort.
If we make it return on the same reply queue as the command we want to abort,
the completion of the aborted command will not race with the completion of
the reset command.

Rename hpsa_scsi_do_simple_cmd_core() to hpsa_scsi_do_simple_cmd(), since
this function is the interface for issuing commands to the controller and
not the "core" of that implementation.  Add a parameter to it which allows
the caller to specify the reply queue to be used.  Modify existing callers
to specify the default reply queue.

Rename __hpsa_scsi_do_simple_cmd_core() to hpsa_scsi_do_simple_cmd_core(),
since this routine is the "core" implementation of the "do simple command"
function and there is no longer any other function with a similar name.
Modify the existing callers of this routine (other than
hpsa_scsi_do_simple_cmd()) to instead call hpsa_scsi_do_simple_cmd(), since
it will now accept the reply_queue paramenter, and it provides a controller
lock-up check.  (Also, tweak two related message strings to make them
distinct from each other.)

Submitting a command to a locked up controller always results in a timeout,
so check for controller lock-up before submitting.

This is to enable fixing a race between command completions and
abort completions on different reply queues in a subsequent patch.
We want to be able to specify which reply queue an abort completion
should occur on so that it cannot race the completion of the command
it is trying to abort.

The following race was possible in theory:

  1. Abort command is sent to hardware.
  2. Command to be aborted simultaneously completes on another
     reply queue.
  3. Hardware receives abort command, decides command has already
     completed and indicates this to the driver via another different
     reply queue.
  4. driver processes abort completion finds that the hardware does not know
     about the command, concludes that therefore the command cannot complete,
     returns SUCCESS indicating to the mid-layer that the scsi_cmnd may be
     re-used.
  5. Command from step 2 is processed and completed back to scsi mid
     layer (after we already promised that would never happen.)

Fix by forcing aborts to complete on the same reply queue as the command
they are aborting.

Piggybacking device rescanning functionality onto the lockup
detection thread is not a good idea because if the controller
locks up during device rescanning, then the thread could get
stuck, then the lockup isn't detected.  Use separate work
queues for device rescanning and lockup detection.

Detect controller lockup in abort handler.

After a lockup is detected, return DO_NO_CONNECT which results in immediate
termination of commands rather than DID_ERR which results in retries.

Modify detect_controller_lockup() to return the result, to remove the need for
a separate check.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Cache the ioaccel handle so that when we need to abort commands sent
down the ioaccel2 path, we can look up the LUN ID in h->dev[] instead of
having to do I/O to the controller.

Add a field to elements in h->dev[] to keep track of how the device is exposed
to the SCSI mid layer: Not at all, without an upper level driver
(no_uld_attach) or normally exposed.

Since masked physical devices are now present in h->dev[] array
it would be perfectly possible to do

	echo scsi add-single-device 2 2 0 0 > /proc/scsi/scsi

and bring them online.  This was previously not allowed for masked
physical devices.

Ensure that the mapping of physical disks to logical drives gets updated in a
consistent way when a RAID migration occurs and is not touched until updates
to it are complete.

now instead of doing CISS_REPORT_PHYSICAL to get the LUNID for
the physical disk in hpsa_get_pdisk_of_ioaccel2(), just get
it out of h->dev[] where we already have it cached.

do not touch phys_disk[] for ioaccel enabled logical drives during rescan
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

There's no reason for it to be a void *, it should be a struct scsi_cmnd *
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This means changing the allocator to reference count commands.
The reference count is now the authoritative indicator of whether a
command is allocated or not.  The h->cmd_pool_bits bitmap is now
only a heuristic hint to speed up the allocation process, it is no
longer the authoritative record of allocated commands.

Since we changed the command allocator to use reference counting
as the authoritative indicator of whether a command is allocated,
fail_all_outstanding_cmds needs to use the reference count not
h->cmd_pool_bits for this purpose.

Fix hpsa_drain_accel_commands to use the reference count as the
authoritative indicator of whether a command is allocated instead of
the h->cmd_pool_bits bitmap.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When using the ioaccel submission methods, requests destined for RAID volumes
are sometimes diverted to physical devices.  The OS has no or limited
knowledge of these physical devices, so it is up to the driver to avoid
pushing the device too hard.  It is better to honor the physical device queue
limit rather than making the device spew zillions of TASK SET FULL responses.

This is so that hpsa based devices support /sys/block/sdNN/device/queue_type
of simple, which lets the SCSI midlayer automatically adjust the queue_depth
based on TASK SET FULL and GOOD status.

Adjust the queue depth for a new device after it is created based on the
maximum queue depths of the physical devices that constitute the
device. This drops the maximum queue depth from .can_queue of 1024 to
something like 174 for single-drive RAID-0, 348 for two-drive RAID-1, etc.
It also adjusts for the ratio of data to parity drives.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Signed-off-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of kicking the commands all the way back to the mid
layer, use a work queue.  This enables having a mechanism for
the driver to be able to resubmit the commands down the "normal"
raid path without turning off the ioaccel feature entirely
whenever an error is encountered on the ioaccel path, and
prevent excessive rescanning of devices.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

By not doing maintaining a list of queued commands, we can eliminate some spin
locking in the main i/o path and gain significant improvement in IOPS.  Remove
the queuing code and the code that calls it; remove now-unused interrupt code;
remove DIRECT_LOOKUP_BIT.

Now that the passthru commands share the same command pool as
the main i/o path, and the total size of the pool is less than
or equal to the number of commands that will fit in the hardware
fifo, there is no need to check to see if we are exceeding the
hardware fifo's depth.
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NRobert Elliott <elliott@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Correct endiness issues reported by sparse. SA controllers are
little endian. This patch ensures endiness correctness.
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Using bit fields for hardware command fields isn't portable and
relies on assumptions about how the compiler lays out the bits.
We can fix this in the driver's internal command structure, but the
ioctl interface we can't change because it is part of the
userland ABI.
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The hardware needs little endian scatter gather addresses and
lengths but we were not bothering to convert from cpu byte
order as we should have been.  On Intel, this is all just
a bunch of no-ops macros, but it makes the code endian-clean(er).
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Signed-off-by: NRobert Elliott <elliott@hp.com>
Reviewed-by: NWebb Scales <webbnh@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We were allocating roughly double the amount of memory
we should be due to ReportLUNdata and ExtendedReportLUNdata
containing a non-zero sized array but adding extra memory
to allocate as if the array were zero sized.

Track the logical and physical sizes separately.
Allocate the memory based on the specific data
structure sizes.
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make return value an int instead of an unsigned char so that
we do not lose negative error return values.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

No sense having 8 or 16 reply queues if you only have 4 cpus,
and likewise no sense limiting to 8 reply queues if you have
many more cpus.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This allows exposing physical disks behind Smart
Array controllers to the OS (if the controller
has the right firmware and is in "hba" mode)
Signed-off-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Do not expose drives that are undergoing a format immediately
to the OS, instead wait until they are ready before bringing
them online.  This is so that logical drives created with
"rapid parity initialization" do not get immediately kicked
off the system for being unresponsive.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Add controller-based data-at-rest encryption compatibility
to ioaccel2 path (HP SSD Smart Path).

Encryption feature requires driver to supply additional fields
for encryption enable, tweak index, and data encryption key index
in the ioaccel2 request structure.

Encryption enable flag and data encryption key index come from
raid_map data structure from raid offload command.

During ioaccel2 submission, check device structure's raid map to see if
encryption is enabled for the device. If so, call new function below.

Add function set_encrypt_ioaccel2 to set encryption flag, data encryption key
index, and calculate tweak value from request's logical block address.
Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Underlying firmware cannot handle task abort on accelerated path (SSD Smart Path).
Change abort requests for accelerated path commands to physical target reset.
Send reset request on normal IO path.
Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NJoe Handzik <Joseph.T.Handzik@hp.com>
Signed-off-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NMike Miller <michael.miller@canonical.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>