- 07 1月, 2006 40 次提交
-
-
由 NeilBrown 提交于
Signed-off-by: NNeil Brown <neilb@suse.de> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
.. because they aren't used outside md.c Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
md sometimes call put_page on NULL pointers (treating it like kfree). This is not safe, so define and use a 'safe_put_page' which checks for NULL. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
- replace open-coded hash chain with hlist macros - Fix hash-table size at one page - it is already quite generous, so there will never be a need to use multiple pages, so no need for __get_free_pages No functional change. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Largely just a cross-port from raid1. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
There is this "FIXME" comment with a typo in it!! that been annoying me for days, so I just had to remove it. conf->disks[i].rdev should only be accessed if - we know we hold a reference or - the mddev->reconfig_sem is down or - we have a rcu_readlock handle_stripe was referencing rdev in three places without any of these. For the first two, get an rcu_readlock. For the last, the same access (md_sync_acct call) is made a little later after the rdev has been claimed under and rcu_readlock, if R5_Syncio is set. So just use that access... However R5_Syncio isn't really needed as the 'syncing' variable contains the same information. So use that instead. Issues, comment, and fix are identical in raid5 and raid6. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
On a read-error we suspend the array, then synchronously read the block from other arrays until we find one where we can read it. Then we try writing the good data back everywhere and make sure it works. If any write or subsequent read fails, only then do we fail the device out of the array. To be able to suspend the array, we need to also keep track of how many requests are queued for handling by raid1d. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
raid6 currently does not check the P/Q syndromes when doing a resync, it just calculates the correct value and writes it. Doing the check can reduce writes (often to 0) for a resync, and it is needed to properly implement the echo check > sync_action operation. This patch implements the appropriate checks and tidies up some related code. It also allows raid6 user-requested resync to bypass the intent bitmap. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
See patch to md.txt for more details Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
raid1 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Add ioctl DM_SKIP_LOCKFS_FLAG for userspace to request that lock_fs is bypassed when suspending a device. There's no change to the behaviour of existing code that doesn't know about the new flag. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Shaw 提交于
Both vfs_getattr and i_op->fsync return error statuses which nfsd was largely ignoring. This as noticed when exporting directories using fuse. This patch cleans up most of the offences, which involves moving the call to vfs_getattr out of the xdr encoding routines (where it is too late to report an error) into the main NFS procedure handling routines. There is still a called to vfs_gettattr (related to the ACL code) where the status is ignored, and called to nfsd_sync_dir don't check return status either. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Kara 提交于
Split the checkpoint list of the transaction into two lists. In the first list we keep the buffers that need to be submitted for IO. In the second list are kept buffers that were already submitted and we just have to wait for the IO to complete. This should simplify a handling of checkpoint lists a bit and can eventually be also a performance gain. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
"extern inline" doesn't make much sense. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marko Kohtala 提交于
Add missing "struct" keyword preventing compilation with DEBUG_PARPORT defined. Also add some "const". Signed-off-by: NMarko Kohtala <marko.kohtala@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marko Kohtala 提交于
Did not move the parport interface properly into IEEE1284_PH_REV_IDLE phase at end of data due to comparing bytes with nibbles. Internal phase IEEE1284_PH_HBUSY_DNA became unused, so remove it. Signed-off-by: NMarko Kohtala <marko.kohtala@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Make the maximum size of write data configurable by the filesystem. The previous fixed 4096 limit only worked on architectures where the page size is less or equal to this. This change make writing work on other architectures too, and also lets the filesystem receive bigger write requests in direct_io mode. Normal writes which go through the page cache are still limited to a page sized chunk per request. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Change the way a too large request is handled. Until now in this case the device read returned -EINVAL and the operation returned -EIO. Make it more flexibible by not returning -EINVAL from the read, but restarting it instead. Also remove the fixed limit on setxattr data and let the filesystem provide as large a read buffer as it needs to handle the extended attribute data. The symbolic link length is already checked by VFS to be less than PATH_MAX, so the extra check against FUSE_SYMLINK_MAX is not needed. The check in fuse_create_open() against FUSE_NAME_MAX is not needed, since the dentry has already been looked up, and hence the name already checked. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Add 'frsize' member to the statfs reply. I'm not sure if sending f_fsid will ever be needed, but just in case leave some space at the end of the structure, so less compatibility mess would be required. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Change interface version to 7.4. Following changes will need backward compatibility support, so store the minor version returned by userspace. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Lidel 提交于
- Removed some kmalloc's with __GFP_ZERO and replace it with memset() because it didn't work properly. - Fixed returned message frame in i2o_cfg_passthru() which caused raidutils to display wrong error message in case a disk was missing. - Fixed size of printk() in i2o_scsi.c. - Fixed get_device() and put_device() in probing of the I2O controller. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Lidel 提交于
Removed wrong I2O device class, which was only needed to add sysfs attributes. Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Lidel 提交于
Changed the I2O API to create I2O messages first in kernel memory and then transfer it at once over the PCI bus instead of sending each quad-word over the PCI bus. Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
This adds the function get_swap_page_of_type() allowing us to specify an index in swap_info[] and select a swap_info_struct structure to be used for allocating a swap page. This function (or another one of similar functionality) will be necessary for implementing the image-writing part of swsusp in the user space. It can also be used for simplifying the current in-kernel implementation of the image-writing part of swsusp. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
This patch makes swsusp free only as much memory as needed to complete the suspend and not as much as possible. In the most of cases this should speed up the suspend and make the system much more responsive after resume, especially if a GUI (eg. X Windows) is used. If needed, the old behavior (ie to free as much memory as possible during suspend) can be restored by unsetting FAST_FREE in power.h Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
This patch introduces the swap map structure that can be used by swsusp for keeping tracks of data pages written to the swap. The structure itself is described in a comment within the patch. The overall idea is to reduce the amount of metadata written to the swap and to write and read the image pages sequentially, in a file-alike way. This makes the swap-handling part of swsusp fairly independent of its snapshot-handling part and will hopefully allow us to completely separate these two parts in the future. This patch is needed to remove the suspend image size limit imposed by the limited size of the swsusp_info structure, which is essential for x86-64 systems with more than 512 MB of RAM. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ivan Kokshaysky 提交于
Thanks to Christoph for doing most of the work. This allows automatic SMP IRQ affinity assignment other than default "all interrupts on all CPUs" which is rather expensive. This might be useful if the hardware can be programmed to distribute interrupts among different CPUs, like Alpha does. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Christoph Hellwig <hch@lst.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jordan Crouse 提交于
Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Make the futex code compilable and usable on NOMMU by making the attempt to handle page faults conditional on CONFIG_MMU. If this is not enabled, then we can assume that EFAULT returned from futex_atomic_op_inuser() is not recoverable, and that the address lies outside of valid memory. handle_mm_fault() is made to BUG if called on NOMMU without attempting to invoke the actual handler (__handle_mm_fault). Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
The attached patch makes the SYSV IPC shared memory facilities use the new ramfs facilities on a no-MMU kernel. The following changes are made: (1) There are now shmem_mmap() and shmem_get_unmapped_area() functions to allow the IPC SHM facilities to commune with the tiny-shmem and shmem code. (2) ramfs files now need resizing using do_truncate() rather than by modifying the inode size directly (see shmem_file_setup()). This causes ramfs to attempt to bind a block of pages of sufficient size to the inode. (3) CONFIG_SYSVIPC is no longer contingent on CONFIG_MMU. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
The attached patch makes ramfs support shared-writable mmaps by: (1) Attempting to perform a contiguous block allocation to the requested size when truncate attempts to increase the file from zero size, such as happens when: fd = shm_open("/file/on/ramfs", ...): ftruncate(fd, size_requested); addr = mmap(NULL, subsize, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_SHARED, fd, offset); (2) Permitting any shared-writable mapping over any contiguous set of extant pages. get_unmapped_area() will return the address into the actual ramfs pages. The mapping may start anywhere and be of any size, but may not go over the end of file. Multiple mappings may overlap in any way. (3) Not permitting a file to be shrunk if it would truncate any shared mappings (private mappings are copied). Thus this patch provides support for POSIX shared memory on NOMMU kernels, with certain limitations such as there being a large enough block of pages available to support the allocation and it only working on directly mappable filesystems. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Remove the key duplication stuff since there's nothing that uses it, no way to get at it and it's awkward to deal with for LSM purposes. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Comment the new locking rules for page_state statistics. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Optimise page_state manipulations by introducing interrupt unsafe accessors to page_state fields. Callers must provide their own locking (either disable interrupts or not update from interrupt context). Switch over the hot callsites that can easily be moved under interrupts off sections. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-