By returning EAGAIN upon a wedged GPU before attempting to wait, we
would hit an infinite loop of repeating operation without ever
progressing. Instead this needs to be EIO so that userspace knows that
the GPU is truly wedged and not in the process of error recovery.

Similarly, we need to handle the error recovery during i915_gem_fault.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The PCH can drive several reference clocks simultaneously, and needs to
with multiple display configurations.  So we can't just clobber the
existing state everytime we set a mode, we need to take into account
what the other CRTCs are doing at the time.

Doing so fixes an issue where you'd lose the LVDS display at boot if you
had an LVDS+DP config.

[updated: init bools and check CRTC status correctly]
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

When a transcoder is disabled, any ports pointing at it should also be
disabled.  If they're not, we may fail to disable the transcoder,
leading to blank displays.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

These bits have a different meaning on ILK+, where planes are hardwired
to pipes.  Fixing this avoid some spurious assertion failures.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The specs say to do so.
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

For consistency and segregation from the noisy DRM_DEBUG().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With the recent SDVO fix, this is working on all the machines I have to
hand - except for an 845G.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Fortunately unreachable. For Crestline, the watermarks must always be
programmed to 8...
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Judging by comments in the BIOS, if the SDVO LVDS option h40 is enabled,
then we are supposed to query the real panel type via Int15. We don't do
this and so for the Sony Vaio VGC-JS210J which has otherwise default
values, we choose the wrong mode.

This patch adds a driver option, i915.vbt_sdvo_panel_type, which can be
used to override the value in the VBT.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33691Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Hugh Dickins found that characters in xterm were going missing and oft
delayed. Being the curious type, he managed to associate this with the
new high-precision vblank patches; disabling these he found, restored
the orderliness of his characters.

The oddness begins when one realised that Hugh was not using vblanks at
all on his system (fvwm and some xterms). Instead, all he had to go on
were warning of a pipe underrun, curiously enough at around 60Hz. He
poked and found that in addition to the underrun warning, the hardware
was flagging the start of a new frame, a vblank, which in turn was
kicking off the pending vblank processing code.

There is little we can do for the underruns on Hugh's machine, a
Crestline [965GM], which must have its FIFO watermarks set to 8.
However, we do not need to process the vblank if we know that they are
disabled...
Reported-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Instead of reporting EIO upfront in the entrance of an ioctl that may or
may not attempt to use the GPU, defer the actual detection of an invalid
ioctl to when we issue a GPU instruction. This allows us to continue to
use bo in video memory (via pread/pwrite and mmap) after the GPU has hung.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Based on a patch by Takashi Iwai.
Reported-by: NMatthias Hopf <mat@mshopf.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27272Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Upon resume, like after a cold boot, we need to forcibly probe the
analog connector and cannot rely on the hotplug status.

Based on a patch by Takashi Iwai.
Reported-by: NStefan Dirsch <sndirsch@suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Call drm_mode_config_reset() after an invalidation event to restore any
cached state to unknown.
Tested-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We were not pausing after detecting the response was pending and so did
not allow the hardware sufficient time to complete before aborting. This
lead to transient failures whilst probing SDVO devices.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30235Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Rather than power cycling the panel when there are no bits to display,
use the VDD AUX bit to power the panel up just enough for DP AUX
transactions to work.  This prevents a bit of unnecessary ugliness as
mode sets occur on the panel.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Now that we're doing the right thing elsewhere, these are no longer
necessary.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31114Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Move the plane->mode config to the point of use rather than repeatedly
querying the same information.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

error_bo and pinned_bo could be used uninitialised if there were no
active buffers.

Caught by kmemcheck.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The opregion is a shared memory region between ACPI and the graphics
driver. As the ACPI mapping has been changed to cachable in commit
6d5bbf00, mapping the intel opregion
non-cachable now fails. As no bus-master hardware is involved in the
opregion, cachable map should do no harm.

Tested on a Fujitsu Lifebook P8010.
Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
[ickle: convert to acpi_os_ioremap for consistency]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

If the driver calls into the kernel to wait for a breadcrumb to pass,
but hasn't enabled interrupts, fallback to polling the breadcrumb value.
Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We only have sufficient information for accurate (sub-frame) timestamping
when the modesetting is under our control.
Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Reviewed-by: NMario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Reported-by: NChris Clayton <chris2553@googlemail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We can only utilize the stolen portion of the GTT if we are in sole
charge of the hardware. This is only true if using GEM and KMS,
otherwise VESA continues to access stolen memory.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Starting with SandyBridge (though possible with earlier hacked BIOSes),
the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior,
it would simply disable the integrated GPU. So we adjust our PCI class
mask to match any DISPLAY_CLASS device.

In such a configuration, the IGFX is not a primary VGA controller and
so should not take part in VGA arbitration, and the error return from
vga_client_register() is expected.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we
were clearing I915_NUM_RINGS of them. Oops.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Tested-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

During system suspend, the "wait for ring buffer to empty" loop would
always time out after three seconds, because the faster cached ring
buffer head read would always return zero.  Force the slow-and-careful
PIO read on all but the first iterations of the loop to fix it.

This also removes the unused (and useless) 'actual_head' variable that
tried to approximate doing this, but did it incorrectly.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: DRI mailing list <dri-devel@lists.freedesktop.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During suspend, Linus found that his machine would hang for 3 seconds,
and identified that intel_ring_buffer_wait() was the culprit:

"Because from looking at the code, I get the notion that
"intel_read_status_page()" may not be exact. But what happens if that
inexact value matches our cached ring->actual_head, so we never even
try to read the exact case? Does it _stay_ inexact for arbitrarily
long times? If so, we might wait for the ring to empty forever (well,
until the timeout - the behavior I see), even though the ring really
_is_ empty."

As the reported HEAD position is only updated every time it crosses a
64k boundary, whilst draining the ring it is indeed likely to remain one
value. If that value matches the last known HEAD position, we never read
the true value from the register and so trigger a timeout.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This is better handled through the tracepoints and just clutters the
debug logs.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Hangcheck and error recovery is only used by GEM.
Reported-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We weren't setting up the vfunc table when initialising the old DRI
ringbuffer, leading to such OOPSes as:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 10c441067 PUD 1185e5067 PMD 0
Oops: 0010 [#1] PREEMPT SMP
last sysfs file: /sys/class/dmi/id/chassis_asset_tag
CPU 3
Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit
cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6
nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev
usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e
usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm
snd_seq snd_timer snd_seq_device processor parport_pc thermal snd
thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon
rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801
rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse
intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod
ata_piix libata scsi_mod unix
Jan 18 15:49:29 lithui kernel:
Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product
Name
RIP: 0010:[<0000000000000000>]  [<(null)>] (null)
RSP: 0018:ffff8801150d1d40  EFLAGS: 00010202
RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704
RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800
RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444
R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800
R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8
FS:  00007f1038d456e0(0000) GS:ffff880001780000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task
ffff88011b016e40)
Stack:
ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000
<0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008
<0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8
Call Trace:
[<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915]
[<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915]
[<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm]
[<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915]
[<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120
[<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0
[<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550
[<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90
[<ffffffff810edb19>] sys_ioctl+0x99/0xa0
[<ffffffff810024ab>] system_call_fastpath+0x16/0x1b
Code:  Bad RIP value.
RIP  [<(null)>] (null)
RSP <ffff8801150d1d40>
CR2: 0000000000000000
Reported-by: NHerbert Xu <herbert@gondor.apana.org.au>
Tested-by: NHerbert Xu <herbert@gondor.apana.org.au>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Reports of FIFO underruns are still persisting on gm45.

References: https://bugs.freedesktop.org/show_bug.cgi?id=27589Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>