The following call chain indicates that dcb_doit() is protected
under rtnl_lock. So if we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handlers in it, this would
help us avoid to change interface reference counter.

rtnetlink_rcv()
  rtnl_lock()
  netlink_rcv_skb()
    dcb_doit()
  rtnl_unlock()

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain indicates that eql_ioctl(), eql_enslave(),
eql_emancipate(), eql_g_slave_cfg() and eql_s_slave_cfg() are
protected under rtnl_lock. So if we use __dev_get_by_name() instead
of dev_get_by_name() to find interface handlers in them, this would
help us avoid to change interface reference counters.

dev_ioctl()
  rtnl_lock()
    dev_ifsioc()
      eql_ioctl()
        eql_enslave()
	eql_emancipate()
	eql_g_slave_cfg()
	eql_s_slave_cfg()
  rtnl_unlock()

Additionally we also change their return values from -EINVAL to
-ENODEV in case that interfaces are no found.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain indicates that bond_do_ioctl() is protected
under rtnl_lock. If we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handler in it, this would
help us avoid to change reference counter of interface once.

dev_ioctl()
  rtnl_lock()
  dev_ifsioc()
    bond_do_ioctl()
  rtnl_unlock()

Additionally we also change the coding style in bond_do_ioctl(),
letting it more readable for us.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chain denotes that both do_reset() and do_del_chan()
are protected under rtnl_lock. If we use __dev_get_by_name() instead of
dev_get_by_name() to find interface handlers in them, this would help
us avoid to change interface reference counter.

dev_ioctl()
  rtnl_lock()
  dev_ifsioc()
    c4_ioctl()
      do_reset()
      do_del_chan()
  rtnl_unlock()
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: remove limitation

Remove the limitation between ecm mode and vendor mode.

v2: replace the patch #3 with "ecm and vendor modes coexist".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the limitation that the ecm and r8152 drivers couldn't coexist.
 - Remove the devices from the blacklist of relative drivers.
 - Remove usb_driver_set_configuration() from r8152 driver.
 - Modify the id_table of the r8152 driver for the vendor mode only.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the following warnings and error:
 - WARNING: usb_free_urb(NULL) is safe this check is probably not required
 - WARNING: kfree(NULL) is safe this check is probably not required
 - ERROR: do not use C99 // comments
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The r8152 could support RTL8153. Update the relative descriptor.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bgmac_mii_register() and register_netdev() both return appropriate error
codes for the failures they would encounter, propagate this error code
instead of overriding the value with -ENOTSUPP which is not the correct
error code to return.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change move anycast_src_echo_reply sysctl with other ipv6 sysctls.
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NFrancois-Xavier Le Bail <fx.lebail@yahoo.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It confuses Smatch when we check "sinit" for NULL and then non-NULL and
that causes a false positive warning later.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
atheros: modify statistics code

Following Ben Hutchings's advice on how to fill net_stats in alx [1],
this patch modifies the other atheros ethernet drivers
similarly. Minor whitespace/empty line changes in atl1c and atl1e to
make the code completely consistent between atl1c, atl1e, and alx.

I don't have this hardware, so these patches have only been
compile-tested.

v2 (changes only in atl1):
 - don't set soft_stats.rx_missed_errors (Ben)
 - add errors to soft_stats.{rx,tx}_packets (Ben)
 - add soft_stats.rx_dropped field and update soft_stats.rx_dropped
   instead of netdev->stats (overwritten) outside of the stats
   update function

Detail of the changes (v1):
* atl1/atl1c/atl1e
  - fix collisions computation
  - rx_dropped = rx_rrd_ov
  - rx_over_errors = 0
  - rx_missed_errors = 0
  - X_packets = X_ok + X_errors

* only atl1c/atl1e
  - add rx_rxf_ov to rx_errors

[1] http://www.spinics.net/lists/netdev/msg264930.html
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ben Hutchings pointed out for the stats in alx, some
hardware-specific stats aren't matched to the right net_device_stats
field. Also fix the collision field and include errors in the total
number of RX/TX packets. Add a rx_dropped field and use it where
netdev->stats was modified directly out of the stats update function.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ben Hutchings pointed out for the stats in alx, some
hardware-specific stats aren't matched to the right net_device_stats
field. Also fix the collision field and include errors in the total
number of RX/TX packets.

Minor whitespace fixes to match the style in alx.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ben Hutchings pointed out for the stats in alx, some
hardware-specific stats aren't matched to the right net_device_stats
field. Also fix the collision field and include errors in the total
number of RX/TX packets.

Minor whitespace fixes to match the style in alx.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this patch bnx2x will configure the PF to perform Tx switching on
out-going traffic as soon as SR-IOV is dynamically enabled and de-activate
it when it is disabled.
This will allow VFs to communicate with their parent PFs.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this is a pull request of three patches for net-next/master.

Oleg Moroz added support for a new PCI card to the generic SJA1000 PCI
driver, Guenter Roeck's patch limits the flexcan driver to little
endian arm (and powerpc) and I fixed a sparse warning found by the
kbuild robot in the ti_hecc driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.
Signed-off-by: NAruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suggested-by: NSimon Schneider <simon-schneider@gmx.net>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We still need this notifier even when we don't config
PROC_FS.

It should be rare to have a kernel without PROC_FS,
so just for completeness.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Improve tracing at the driver/core boundary

These patches add static tracpeoints at the driver/core boundary which
record various skb fields likely to be useful for datapath debugging.
On the TX side the boundary is where the core calls ndo_start_xmit, and
on the RX side it is where any of the various exported receive functions
is called.

The set of skb fields is mostly based on what I thought would be
interesting for sfc.

These patches are basically the same as what I sent as an RFC in
November, but rebased.  They now depend on 'net: core: explicitly select
a txq before doing l2 forwarding', so please merge net into net-next
before trying to apply them.  The first patch fixes a code formatting
error left behind after that fix.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing net/netif_rx and net/netif_receive_skb trace events
provide little information about the skb, nor do they indicate how it
entered the stack.

Add trace events at entry of each of the exported functions, including
most fields that are likely to be interesting for debugging driver
datapath behaviour.  Split netif_rx() and netif_receive_skb() so that
internal calls are not traced.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing net/net_dev_xmit trace event provides little information
about the skb that has been passed to the driver, and it is not
simple to add more since the skb may already have been freed at
the point the event is emitted.

Add a separate trace event before the skb is passed to the driver,
including most fields that are likely to be interesting for debugging
driver datapath behaviour.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paul Durrant says:

====================
make skb_checksum_setup generally available

Both xen-netfront and xen-netback need to be able to set up the partial
checksum offset of an skb and may also need to recalculate the pseudo-
header checksum in the process. This functionality is currently private
and duplicated between the two drivers.

Patch #1 of this series moves the implementation into the core network code
as there is nothing xen-specific about it and it is potentially useful to
any network driver.
Patch #2 removes the private implementation from netback.
Patch #3 removes the private implementation from netfront.

v2:
- Put skb_checksum_setup in skbuff.c rather than dev.c
- remove inline
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use skb_checksum_setup to set up partial checksum offsets rather
then a private implementation.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use skb_checksum_setup to set up partial checksum offsets rather
then a private implementation.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a function to set up the partial checksum offset for IP
packets (and optionally re-calculate the pseudo-header checksum) into the
core network code.
The implementation was previously private and duplicated between xen-netback
and xen-netfront, however it is not xen-specific and is potentially useful
to any network driver.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And it can become static.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 60e453a9 ("USBNET: fix handling padding packet")
added an extra SG entry in case padding is necessary, but
failed to update the initialisation of the list. This can
cause list traversal to fall off the end of the list,
resulting in an oops.

Fixes: 60e453a9 ("USBNET: fix handling padding packet")
Reported-by: NThomas Kear <thomas@kear.co.nz>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Tested-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit c466a9b2
(net: 3com: slight optimization of addr compare)
cause a warning: "passing argument 1 of 'ether_addr_equal'
from incompatible pointer type", so fix it.

I think julia will convert ether_addr_equal to ether_addr_equal_64bits later.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 6878f79a
(net: qlcnic: slight optimization of addr compare)
cause a warning "sparse: incorrect type in argument 2
(different type sizes)", so fix it.

I think julia will convert ether_addr_equal to ether_addr_equal_64bits later.

Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sh_eth_error() in case of a TX error tries to print a message using 2 dev_err()
calls with the first string not finished by '\n', so that the resulting message
would inevitably come out garbled, with something like "3net eth0: " inserted
in the middle.  Avoid that by merging 2 calls into one.

While at it, insert an empty line after the nearby declaration.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/xfrm/xfrm_policy.c

Steffen Klassert says:

====================
This pull request has a merge conflict between commits be7928d2
("net: xfrm: xfrm_policy: fix inline not at beginning of declaration") and
da7c224b ("net: xfrm: xfrm_policy: silence compiler warning") from
the net-next tree and commit 2f3ea9a9 ("xfrm: checkpatch erros with
inline keyword position") from the ipsec-next tree.

The version from net-next can be used, like it is done in linux-next.

1) Checkpatch cleanups, from Weilong Chen.

2) Fix lockdep complaints when pktgen is used with IPsec,
   from Fan Du.

3) Update pktgen to allow any combination of IPsec transport/tunnel mode
   and AH/ESP/IPcomp type, from Fan Du.

4) Make pktgen_dst_metrics static, Fengguang Wu.

5) Compile fix for pktgen when CONFIG_XFRM is not set,
   from Fan Du.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT
and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock
(not just TIME_WAIT), and for such sockets the tw_substate field holds
the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2.

This brings the inet_diag state-matching code in line with the field
it uses to populate idiag_state. This is also analogous to the info
exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state
and get_timewait4_sock() exports tw->tw_substate.

Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state
fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi
state time-wait" would also return sockets in state TCP_FIN_WAIT2.

This is an old bug that predates 05dbc7b5 ("tcp/dccp: remove twchain").
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>