- 23 7月, 2016 2 次提交
-
-
由 Eric Auger 提交于
kvm_setup_default_irq_routing and kvm_setup_empty_irq_routing are not used by generic code. So let's move the declarations in x86 irq.h header instead of kvm_host.h. Signed-off-by: NEric Auger <eric.auger@redhat.com> Suggested-by: NAndre Przywara <andre.przywara@arm.com> Acked-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Eric Auger 提交于
Enhance kvm_kernel_irq_routing_entry to transport the device id field, devid. A new flags field makes possible to indicate the devid is valid. Those additions are used for ARM GICv3 ITS MSI injection. The original struct msi_msg msi field is replaced by a new custom structure that embeds the new fields. Signed-off-by: NEric Auger <eric.auger@redhat.com> Suggested-by: NRadim Krčmář <rkrcmar@redhat.com> Acked-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 19 7月, 2016 3 次提交
-
-
由 Marc Zyngier 提交于
Let's restore some of the #defines that have been savagely dropped by the introduction of the KVM ITS code, as pointlessly break other users (including series that are already in -next). Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Andre Przywara 提交于
arm-gic-v3.h contains bit and register definitions for the GICv3 and ITS, at least for the bits the we currently care about. The ITS emulation needs more definitions, so add them and refactor the memory attribute #defines to be more universally usable. To avoid changing all users, we still provide some of the old definitons defined with the help of the new macros. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NEric Auger <eric.auger@redhat.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Andre Przywara 提交于
The kvm_io_bus framework is a nice place of holding information about various MMIO regions for kernel emulated devices. Add a call to retrieve the kvm_io_device structure which is associated with a certain MMIO address. This avoids to duplicate kvm_io_bus' knowledge of MMIO regions without having to fake MMIO calls if a user needs the device a certain MMIO address belongs to. This will be used by the ITS emulation to get the associated ITS device when someone triggers an MSI via an ioctl from userspace. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NEric Auger <eric.auger@redhat.com> Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NEric Auger <eric.auger@redhat.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 21 6月, 2016 1 次提交
-
-
由 David Hildenbrand 提交于
Let's introduce that helper. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 16 6月, 2016 2 次提交
-
-
由 Paolo Bonzini 提交于
The new created_vcpus field makes it possible to avoid the race between irqchip and VCPU creation in a much nicer way; just check under kvm->lock whether a VCPU has already been created. We can then remove KVM_APIC_ARCHITECTURE too, because at this point the symbol is only governing the default definition of kvm_vcpu_compatible. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The race between creating the irqchip and the first VCPU is currently fixed by checking the presence of an irqchip before updating kvm->online_vcpus, and undoing the whole VCPU creation if someone created the irqchip in the meanwhile. Instead, introduce a new field in struct kvm that will count VCPUs under a mutex, without the atomic access and memory ordering that we need elsewhere to protect the vcpus array. This also plugs the race and is more easily applicable in all similar circumstances. Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 6月, 2016 4 次提交
-
-
由 Xin Long 提交于
Now we cannot distinguish that one sk is a udp or sctp style when we use ss to dump sctp_info. it's necessary to dump it as well. For sctp_diag, ss support is not officially available, thus there are no official users of this yet, so we can add this field in the middle of sctp_info without breaking user API. v1->v2: - move 'sctpi_s_type' field to the end of struct sctp_info, so that it won't cause incompatibility with applications already built. - add __reserved3 in sctp_info to make sure sctp_info is 8-byte alignment. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luis de Bethencourt 提交于
The members child_list and active_list were added to the fence struct without descriptions for the Documentation. Adding these. Fixes: b55b54b5 ("staging/android: remove struct sync_pt") Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Rob Clark 提交于
Apparently nobody noticed that dma-buf.h wasn't actually pulled into docbook build. And as a result the headerdoc comments bitrot a bit. Add missing params/fields. Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
- 29 5月, 2016 6 次提交
-
-
由 George Spelvin 提交于
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
由 George Spelvin 提交于
The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
由 George Spelvin 提交于
That's all that's ever asked for, and it makes the return type of hash_long() consistent. It also allows (upcoming patch) an optimized implementation of hash_64 on 32-bit machines. I tried adding a BUILD_BUG_ON to ensure the number of bits requested was never more than 32 (most callers use a compile-time constant), but adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler unless tools/perf/MANIFEST is updated, and understanding that code base well enough to update it is too much trouble. I did the rest of an allyesconfig build with such a check, and nothing tripped. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
由 George Spelvin 提交于
Finally, the first use of previous two patches: eliminate the separate ad-hoc string hash functions in the sunrpc code. Now hash_str() is a wrapper around hash_string(), and hash_mem() is likewise a wrapper around full_name_hash(). Note that sunrpc code *does* call hash_mem() with a zero length, which is why the previous patch needed to handle that in full_name_hash(). (Thanks, Bruce, for finding that!) This also eliminates the only caller of hash_long which asks for more than 32 bits of output. The comment about the quality of hashlen_string() and full_name_hash() is jumping the gun by a few patches; they aren't very impressive now, but will be improved greatly later in the series. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: linux-nfs@vger.kernel.org
-
由 George Spelvin 提交于
We'd like to make more use of the highly-optimized dcache hash functions throughout the kernel, rather than have every subsystem create its own, and a function that hashes basic null-terminated strings is required for that. (The name is to emphasize that it returns both hash and length.) It's actually useful in the dcache itself, specifically d_alloc_name(). Other uses in the next patch. full_name_hash() is also tweaked to make it more generally useful: 1) Take a "char *" rather than "unsigned char *" argument, to be consistent with hash_name(). 2) Handle zero-length inputs. If we want more callers, we don't want to make them worry about corner cases. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
由 George Spelvin 提交于
... so they can be used without the rest of <linux/dcache.h> The hashlen_* macros will make sense next patch. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
- 28 5月, 2016 5 次提交
-
-
由 Al Viro 提交于
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e640. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Tested-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Now that the allmodconfig x86-64 build is clean wrt IS_ERR_VALUE() uses on integers, add a cast to a pointer and back to the argument, so that any new mis-uses of IS_ERR_VALUE() will cause warnings like warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] so that we don't re-introduce any bogus uses. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The do_brk() and vm_brk() return value was "unsigned long" and returned the starting address on success, and an error value on failure. The reasons are entirely historical, and go back to it basically behaving like the mmap() interface does. However, nobody actually wanted that interface, and it causes totally pointless IS_ERR_VALUE() confusion. What every single caller actually wants is just the simpler integer return of zero for success and negative error number on failure. So just convert to that much clearer and more common calling convention, and get rid of all the IS_ERR_VALUE() uses wrt vm_brk(). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The register_page_bootmem_info_node() function needs to be marked __init in order to avoid a new warning introduced by commit f65e91df ("mm: use early_pfn_to_nid in register_page_bootmem_info_node"). Otherwise you'll get a warning about how a non-init function calls early_pfn_to_nid (which is __meminit) Cc: Yang Shi <yang.shi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 5月, 2016 4 次提交
-
-
由 Michal Hocko 提交于
mmput_async is currently used only from the oom_reaper which is defined only for CONFIG_MMU. We can save work_struct in mm_struct for !CONFIG_MMU. [akpm@linux-foundation.org: fix typo, per Minchan] Link: http://lkml.kernel.org/r/20160520061658.GB19172@dhcp22.suse.czReported-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
It's unused since commit 7ed2f9e6 ("mm, kasan: SLAB support") Link: http://lkml.kernel.org/r/1464020961-2242-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
lockless_dereference() is supposed to take pointer not integer. Link: http://lkml.kernel.org/r/20160521201448.GA7429@p183.telecom.bySigned-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Moritz Fischer 提交于
This commit fixes a simple typo s/mvmem/nvmem in the example. Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 26 5月, 2016 13 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Zhang Zhuoyu 提交于
This patch makes serverl logical caculation functions return bool to improve readability due to these particular functions only using 0/1 as their return value. No functional change. Signed-off-by: NZhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
-
由 Yan, Zheng 提交于
If MDS sorts dentries in dirfrag in hash order, we use hash value to compose dentry offset. dentry offset is: (0xff << 52) | ((24 bits hash) << 28) | (the nth entry hash hash collision) This offset is stable across directory fragmentation. This alos means there is no need to reset readdir offset if directory get fragmented in the middle of readdir. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Set a flag in readdir request, which indicates that client interprets 'end/complete' as bit flags. So that mds can reply additional flags in readdir reply. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Ilya Dryomov 提交于
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
... with a wrapper around maybe_request_map() - no need for two osdmap-specific functions. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
This adds the "map check" infrastructure for sending osdmap version checks on CALC_TARGET_POOL_DNE and completing in-flight requests with -ENOENT if the target pool doesn't exist or has just been deleted. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
For map check, we are going to need to send CEPH_MSG_MON_GET_VERSION messages asynchronously and get a callback on completion. Refactor MON client to allow firing off generic requests asynchronously and add an async variant of ceph_monc_get_version(). ceph_monc_do_statfs() is switched over and remains sync. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Implement ceph_osdc_watch_check() to be able to check on status of watch. Note that the time it takes for a watch/notify event to get delivered through the notify_wq is taken into account. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Implement ceph_osdc_notify() for sending notifies. Due to the fact that the current messenger can't do read-in into pagelists (it can only do write-out from them), I had to go with a page vector for a NOTIFY_COMPLETE payload, for now. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
This adds support and switches rbd to a new, more reliable version of watch/notify protocol. As with the OSD client update, this is mostly about getting the right structures linked into the right places so that reconnects are properly sent when needed. watch/notify v2 also requires sending regular pings to the OSDs - send_linger_ping(). A major change from the old watch/notify implementation is the introduction of ceph_osd_linger_request - linger requests no longer piggy back on ceph_osd_request. ceph_osd_event has been merged into ceph_osd_linger_request. All the details are now hidden within libceph, the interface consists of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack(). ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep the lifetime management simple. ceph_osdc_notify_ack() accepts an optional data payload, which is relayed back to the notifier. Portions of this patch are loosely based on work by Douglas Fuller <dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
This is a major sync up, up to ~Jewel. The highlights are: - per-session request trees (vs a global per-client tree) - per-session locking (vs a global per-client rwlock) - homeless OSD session - no ad-hoc global per-client lists - support for pool quotas - foundation for watch/notify v2 support - foundation for map check (pool deletion detection) support The switchover is incomplete: lingering requests can be setup and teared down but aren't ever reestablished. This functionality is restored with the introduction of the new lingering infrastructure (ceph_osd_linger_request, linger_work, etc) in a later commit. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
OSD client is getting moved from the big per-client lock to a set of per-session locks. The big rwlock would only be held for read most of the time, so a global osdc->osd_lru needs additional protection. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-