提交 · d93906b869dd9444823f04ea64a585143f18a26e · openeuler / raspberrypi-kernel

05 6月, 2013 17 次提交

ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH · d93906b8

由 Simon Horman 提交于 5月 13, 2013

"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO
driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is
not universal for all SoCs a flag, has_both_edge_trigger, has been
added to the platform data of the driver to allow this feature to be
enabled.

As the r8a7790 SoC hardware supports this feature enable it.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

d93906b8

Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB" · 2cd3c927

由 Laurent Pinchart 提交于 5月 31, 2013

GPIOLIB dependency handling was added to the PINCTRL core by

commit 2afe8229
Author: Haojian Zhuang <haojian.zhuang@linaro.org>
Date:   Thu Mar 28 07:34:19 2013 +0800

    pinctrl: core: add dependence of GPIOLIB

There is not need to handle that dependency at the SH Mobile level
anymore. Revert

commit 6722f6cb
Author: Magnus Damm <damm@opensource.se>
Date:   Mon Mar 18 22:58:18 2013 +0900

    ARM: shmobile: Disallow PINCTRL without GPIOLIB

    Modify mach-shmobile to only select PINCTRL in case of
    ARCH_WANT_OPTIONAL_GPIOLIB is set.

    This fixes a build error triggered when adding a new SoC
    lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n):
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

2cd3c927

ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIO · 7af2aec1

由 Laurent Pinchart 提交于 4月 21, 2013

The VCCQ MC0 power gate is now controlled by a regulator registered by
the PFC driver. Remove the corresponding function GPIO.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

7af2aec1

ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIO · 261e4e1d

由 Laurent Pinchart 提交于 4月 21, 2013

261e4e1d

ARM: shmobile: r8a7779 pinmux platform device cleanup · 0ccaf5bb

由 Magnus Damm 提交于 4月 12, 2013

Use DEFINE_RES_MEM() to save a couple of lines of code.
Signed-off-by: NMagnus Damm <damm@opensource.se>
[lp: Don't declare r8a7779_pfc_resources as const]
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

0ccaf5bb

ARM: shmobile: r8a7790: Remove all GPIOs · 3654520c

由 Laurent Pinchart 提交于 4月 08, 2013

Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

3654520c

ARM: shmobile: r8a7790: Register GPIO devices · 43ca9cbb

由 Laurent Pinchart 提交于 4月 08, 2013

Move GPIOs handling from the PFC device to separate GPIO devices.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

43ca9cbb

ARM: shmobile: r8a7778: add GPIO support · 39ca2283

由 Kuninori Morimoto 提交于 4月 17, 2013

This patch was tested on Bock-W board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

39ca2283

ARM: shmobile: r8a7740: Remove all GPIOs · f92e1360

由 Laurent Pinchart 提交于 4月 23, 2013

Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

f92e1360

ARM: shmobile: r8a7740: Remove HDMI function GPIOs · 7e454d1f

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

7e454d1f

ARM: shmobile: r8a7740: Remove FSI function GPIOs · eb868573

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

eb868573

ARM: shmobile: r8a7740: Remove CEU function GPIOs · 102b61e8

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

102b61e8

ARM: shmobile: r8a7740: Remove GETHER function GPIOs · 3dad31ad

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

3dad31ad

ARM: shmobile: r8a7740: Remove BSC function GPIOs · 45bfd2ad

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

45bfd2ad

ARM: shmobile: r8a7740: Remove INTC function GPIOs · 1343000c

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

1343000c

ARM: shmobile: r8a7740: Remove SCIF function GPIOs · ac32d7cb

由 Laurent Pinchart 提交于 4月 18, 2013

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

ac32d7cb

ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrl · 7cdfb46e

由 Bastian Hecht 提交于 4月 17, 2013

We use the new pinctrl framework now.
Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

7cdfb46e

04 6月, 2013 23 次提交

ARM: shmobile: bonito: Don't configure LCDC routing manually · 8be14c78

由 Laurent Pinchart 提交于 4月 23, 2013

LCDC routing is configured automatically in the PFC driver, don't
configure it manually in board code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

8be14c78

ARM: shmobile: bonito: Register pinctrl mapping for BSC · 055b2469

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based BSC pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

055b2469

ARM: shmobile: bonito: Register pinctrl mapping for INTC · f569b10f

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

f569b10f

ARM: shmobile: bonito: Register pinctrl mapping for SCIF · 7cded0c9

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

7cded0c9

ARM: shmobile: bonito: Remove empty core devices array · 6c887d2c

由 Laurent Pinchart 提交于 4月 18, 2013

The core devices array is empty, passing it to platform_add_devices() is
a no-op. Remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

6c887d2c

ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers · f5c02edc

由 Laurent Pinchart 提交于 4月 23, 2013

The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

f5c02edc

ARM: shmobile: armadillo800eva: Don't configure LCDC routing manually · 1b5961c3

由 Laurent Pinchart 提交于 4月 23, 2013

LCDC routing is configured automatically in the PFC driver, don't
configure it manually in board code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

1b5961c3

ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMI · f1bb4ab0

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

f1bb4ab0

ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSI · fed8976e

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

fed8976e

ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0 · babde827

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

babde827

ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHER · 613285ce

由 Laurent Pinchart 提交于 4月 18, 2013

Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

613285ce

ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTC · 89ae7b5b

由 Laurent Pinchart 提交于 4月 18, 2013

89ae7b5b

ARM: shmobile: sh7372: Remove all GPIOs · 0d0c8e36

由 Laurent Pinchart 提交于 4月 22, 2013

Function GPIOs are not used anymore, and all code use the GPIO numbers
directly. Remove the GPIOs enumeration.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

0d0c8e36

ARM: shmobile: ap4evb: Register pinctrl mapping for USBHS · 025cc6ec

由 Laurent Pinchart 提交于 4月 19, 2013

Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

025cc6ec

ARM: shmobile: ap4evb: Register pinctrl mapping for TSC2007 · 119612d2

由 Laurent Pinchart 提交于 4月 19, 2013

Replace the GPIO-based TSC2007 pinmux configuration by a pinctrl
mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

119612d2

ARM: shmobile: ap4evb: Simplify tsc2007 pen state read function · 4a666a78

由 Laurent Pinchart 提交于 4月 21, 2013

The pen state is retrieved by reading the state of a pin used as an IRQ.
There's no need to reconfigure the pin as a pure GPIO, as the IRQ pin
state can be read.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

4a666a78

ARM: shmobile: ap4evb: Register pinctrl mapping for SMSC911x · 5436c2b9

由 Laurent Pinchart 提交于 4月 19, 2013

Replace the GPIO-based SMSC911x pinmux configuration by a pinctrl
mapping.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

5436c2b9