This patch contains several fixes for the autosearch algorithm and other small ones.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains support for the DiB7000PC-driver.
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

First working version of the dib7000m-driver. 
This commit also makes the Hauppauge NOVA-T Stick working.
Signed-off-by: NFrancois Kanounnikoff <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Initial commit for the driver for the DiB7000M COFDM demodulator.
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Keeps sparse happy.
Signed-of-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The tda10086 causes an oops (divide by zero) if a zero symbol rate is used;
this prevents this.
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sparse "defined twice" warning
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When a front-end is disabled, card drivers that use it are compiled with
a stub version of the front-end's attach function.  This way they have no
references to the front-end's code and don't need it to be loaded.
If a card driver is compiled into the kernel, and a front-end is a
module, then that front-end is effectively disabled wrt the card driver. 
In this case, the card driver should get the stub version.  This was not
happening.
The stub vs real attach function selection is changed so that when the
front-end is a module the real attach function is only used if the card
driver is a module as well.  This means a module front-end will be
supported by card drivers that are modules and not supported by card
drivers compiled into the kernel.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Let the MT2060 be customized like most of the other DVB PLLs/front-ends. 
Also, add a missing dependency on I2C.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added config-struct-parameter to take board-specific AGC command 1 and 2 into account.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A number of people have been reporting wierd tuning problems with various
cards. Yeasah tracked down the problem to a miss-read datasheet. This
resolves the problems.
Signed-off-by: NYeasah Pell <yeasah@schwide.net>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- forward the clock to the slave undivided
- when sleeping the 3000 do not shutdown the clock
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- make the timing frequency update work.
- fix AGC calibration for Nova-T 500
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T).
It adds correct AGC setting for the 3000P, correct firmware download state
detection.
Additionally it fixes the mt2060-driver to be able to be used with dvb_attach.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Changed the attach-function of the dib3000mc-driver to return only one
frontend. In case of multiple dib3000-chips on one board, one has to call the
i2c-enumeration manually before.
Added a field to Microtune 2060 config to output the clock to other
tuners/device on a board.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I had forgotten to add the wrapper round the tua6100_attach function if its
disabled in Kconfig
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This driver was originally in budget-av.c, however I have extracted it into
a seperate file to permit reuse.
I also reworked the code to make it maintainable. I then examined the KNC1
windows drivers and rewrote the code in order to configure the PLL as they
do. This solves a lot of reported tuning problems.
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The cx22702 returns an 8 bit unshifted value for signal strength; this is 
inconsistent with most other frontends
Signed-off-by: NBradley Derek Kite <bradley.kite@gmail.com>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The release callback was installed in ops.release, it should have been
ops.release_sec.  This prevented to front-end release from getting
called.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Still the pid_parse bit was erased.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Matthieu Castet found that with the rewritten dib3000mc-driver the PID-parsing
was handled correctly. This changeset fixes it.
Thanks Matthieu
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

More register setup which improves the ZL10353's tuning characteristics.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Force parallel transport stream output on the ZL10353 attached to a
bluebird device.
Addresses the problem where a frontend lock was observed, but no MPEG
transport data was received.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

lnbp21 module must use fe->ops.release_sec, not fe->ops.release.
The release function of the frontend driver was never called for cards
with lnbp21...
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Forget to put the MODULE-define and thus to give the license. Now GPL
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

1) It sets LNBDCPol differently based on the card type. Now it should
work properly for both the kworld and geniatech cards.
2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command
(the cx88-dvb level handles the actual voltage on/off, but it still
passes the ioctl down to the cx24123 level, which previously rejected
the OFF as invalid so the ioctl would report failure)
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NYeasah Pell <yeasah@schwide.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Hardware algorithm needs to be configured to:
1) Increase timeout constants, to detect weaker signals;
2) do a wider zigzag search.
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Removed and commented a small debug function.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The VGA was not turned on after calling sleep. This lead to bad performance in difficult areas.
Signed-off-by: Nmatthieu castet <castet.matthieu@free.fr>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

DiB3000MC: set FE to NULL after being freed
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The first commit omitted the common-code and header-files.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A complete rewrite of the DiB3000MC/P driver has been done. It is now much more
easy to maintain and to get improvements inside.

Additionally the tuning time has been reduced and the usage of the driver is
much more understandable now.
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

removing the dib3000-common-module. The common stuff is not common anymore - it will be only used by the 3000mb-driver.
A new 3000mc/p-driver will be added which will share common stuff with dib7000.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

new tuner api
minor fixes for tuning
Signed-off-by: NOlivier DANET <odanet@caramail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When debugging was disabled at lot of empty lines where printed anyway.
Reported by Rolf Ahrenberg and Sergei Haller.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some minor code cleanups and added the MT2060 to new v4l-dvb-build-system, preliminarily under dvb/frontends.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- AGC gain set to 3
- The tuning sequence has been changed to match the DibCom driver ( from I2C
  spy captures )
- For LITE-ON adapters : The IF1 frequency is now tuned according to the
  calibration values stored in EEPROM.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NOlivier DANET <odanet@caramail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>