- 28 4月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
There are two entry points for the headphone automute functions for Realtek, alc_automute_amp() and alc_automute_pin(). These call the same function in the end, so we can basically consolidate these with a flag in spec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 4月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
This patch adds the support of "Channel Mode" enum control to Realtek auto-parser. When line-in or mic-in jacks are capable to output and free DACs are available, the driver allows to switch to multi-channel mode via "Channel Mode" enum switch, as already implemented in some preset cases. Not implemented in all Realtek codecs. Currently, ALC880, 882, 861, 662 and the compatible codecs are supported. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Allow alc662_dac_to_mix() and alc662_look_for_dac() to parse down the selector widget that is found in ALC880-type codecs, and rename them to alc_auto_*() accordingly. This is for the next coming multi-io extensions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For some motherboards with 5 or 6 audio jacks which had six or eight multiple channels output, smart5.1 item is no useful and should be removed. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 4月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
The workaround for AMD chipset via sync_write flag seems needed for machines with Realtek codecs. So, it's better to activate it generically in hda_intel.c from the beginning. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
EAPD power-down should be called also for normal shutup cases. Let's move to there. This also fixes the compile warnings when CONFIG_PM isn't set automatically. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 21 4月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
The AMD chipset seems unstable in the normal operation mode, and it seems requring more sensible access for each verb. Enabling sync_write mode and allowing bus-reset is a sort of workaround for these chipset stability issues. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mike Waychison 提交于
When SND_HDA_NEEDS_RESUME is not defined, the compiler identifies that the following symbols are static but not used: restore_shutup_pins hda_cleanup_all_streams Fix warnings by adding SND_HDA_NEEDS_RESUME guards. Signed-off-by: NMike Waychison <mikew@google.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Seth Heasley 提交于
This patch adds the HD Audio Controller DeviceIDs for the Intel Panther Point PCH. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 4月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Acer laptops with ALC271x needs a magic initialization for digital-mic to make it working with mono streams (and PulseAudio). Added a fix-up applied to Acer with ALC271x generically. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 4月, 2011 1 次提交
-
-
由 Andrew Morton 提交于
sound/pci/hda/hda_codec.c: In function 'snd_hda_get_connections': sound/pci/hda/hda_codec.c:332: warning: unused variable 'j' Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 4月, 2011 1 次提交
-
-
由 Raymond Yau 提交于
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 4月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 07 4月, 2011 13 次提交
-
-
由 Takashi Iwai 提交于
The connection lists are static and we can reuse the previous results instead of querying via verb at each time. This will reduce the I/O in the runtime especially for some codec auto-parsers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixes the kernel warnings with IDT codecs like hda_codec: connection list not available for 0x1e Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Since we now set up the connections and mutes dynamically in the auto-parser, all static initializations via alc662_init_verbs & co are no longer needed. Let's drop them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Mute the ADC as default in the auto-parser dynamically instead of relying on the static init verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of static init array, better to determine the connection and the mute status of the pin/mixer/DAC route dynamically. This fixes the uninitialized mixer 0x0f on ALC892. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
In cases where there is only one internal mic connected to ADC 0x11, alc275_setup_dual_adc won't handle the case, so we need to add the ADC node to the array of candidates. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/752792 Reported-by: Vincenzo Pii Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Aaron Plattner 提交于
The MCP7x hardware computes the audio infoframe channel count automatically, but requires the audio driver to set the audio infoframe checksum manually via the Nv_VERB_SET_Info_Frame_Checksum control verb. When audio starts playing, nvhdmi_8ch_7x_pcm_prepare sets the checksum to (0x71 - chan - chanmask). For example, for 2ch audio, chan == 1 and chanmask == 0 so the checksum is set to 0x70. When audio playback finishes and the device is closed, nvhdmi_8ch_7x_pcm_close resets the channel formats, causing the channel count to revert to 8ch. Since the checksum is not reset, the hardware starts generating audio infoframes with invalid checksums. This causes some displays to blank the video. Fix this by updating the checksum and channel mask when the device is closed and also when it is first initialized. In addition, make sure that the channel mask is appropriate for an 8ch infoframe by setting it to 0x13 (FL FR LFE FC RL RR RLC RRC). Signed-off-by: NAaron Plattner <aplattner@nvidia.com> Acked-by: NStephen Warren <swarren@nvidia.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
alc269_suspend is just calling the shut-up, so we can use the new shutup callback for the purpose. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add shutup callback to be called codec-specifically for avoiding pop noises at suspend or shutdown. As a generic callback, just turn EAPD off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Reduced the duplicated codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
So far, alc662_init_verbs[] is used for all ALC662-compatible chips, but the EAPD controls for 0x15 in there is invalid for ALC892. Also, since EAPDs should be set up in alc_auto_init_amp(), these static elements aren't needed for auto-parser, too. In this patch, the EAPD init verbs are split from alc662_init_verbs, and applied only to static quirks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2011 4 次提交
-
-
由 Takashi Iwai 提交于
The current alc662 parser doesn't set the DAC for the mixer 0x0f properly for ALC892, which has 4 DACs while ALC662 has 3. Fixed by implementing alc662_mix_to_dac() more genericly with the dynamic widget list. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some ALC272-quirks use alc662_dac_nids instead of alc272_dac_nids. This patch fixes these entries. No functional change since the first two elements are identical in both arrays. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Raymond Yau 提交于
alc662 series only have 3 DAC, so it can only support 5stack-dig instead of 6stack-dig. [updated HD-Audio-Models.txt as well by tiwai] Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tarek Soliman 提交于
There are many USB MIDI cables out there that have buggy firmware that reports it can do more than 4 bytes in a packet when they can only properly handle 4 This patch adds the ID of yet another one of those cables Signed-off-by: NTarek Soliman <tarek@bashasoliman.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 4月, 2011 2 次提交
-
-
由 David Henningsson 提交于
Without the "thinkpad" quirk, the dock mic in Lenovo X220 tablet edition won't work. BugLink: http://bugs.launchpad.net/bugs/751033 Cc: stable@kernel.org Tested-by: NJames Ferguson <james.ferguson@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
-
- 03 4月, 2011 3 次提交
-
-
由 Stephen Warren 提交于
wordsize is used as the textual width of a register address. regsize is used as the textual width of a register value. The assignments to these values were swapped. In the case of WM8903, which has 8-bit register addresses and 16-bit register values, this caused the register values to be clipped to 2 digits instead of the full 4. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.39
-
由 Vasily Khoruzhick 提交于
pxa2xx_pcm_hw_free frees dma channel and sets prtd->dma_ch to -1, but does not set prtd->params to NULL, so if pxa2xx_pcm_hw_params will be called immediately, it leaves prtd->dma_ch initialized with -1, and it results in oops in __pxa2xx_pcm_prepare. This bug is triggered via SDL. This patch adds check for prtd->dma_ch to __pxa2xx_pcm_prepare and cleans prtd->params, so now it works properly. Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 4月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Kelly Anderson 提交于
When period interrupts are disabled, snd_pcm_update_hw_ptr0() compares the current time against the time estimated for the current hardware pointer to detect xruns. The somewhat fuzzy threshold in the while loop makes it possible that hdelta becomes negative; the comparison being done with unsigned types then makes the loop go through the entire 263 negative range, and, depending on the value, never reach an unsigned value that is small enough to stop the loop. Doing this with interrupts disabled results in the machine locking up. To prevent this, ensure that the loop condition uses signed types for both operands so that the comparison is correctly done. Many thanks to Kelly Anderson for debugging this. Reported-by: NNix <nix@esperi.org.uk> Reported-by: N"Christopher K." <c.krooss@googlemail.com> Reported-and-tested-by: NKelly Anderson <kelly@silka.with-linux.com> Signed-off-by: NKelly Anderson <kelly@silka.with-linux.com> [cl: remove unneeded casts; use a temp variable] Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: 2.6.38 <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 4月, 2011 1 次提交
-
-
由 David Henningsson 提交于
This quirk is needed for the docking station mic of Lenovo Thinkpad X220 to function correctly. BugLink: http://bugs.launchpad.net/bugs/746259 Cc: stable@kernel.org Tested-by: NJames Ferguson <james.ferguson@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-