By running the following reproducer, we can confirm that the write 
system call returns with 0 when it should return the error EFBIG.

#!/bin/sh

/bin/dd if=/dev/zero of=./img bs=1k count=1 seek=1024k > /dev/null 2>&1
/sbin/mkfs.ext3 -Fq ./img
/bin/mount -o loop -t ext4 ./img /mnt
/bin/touch /mnt/file
strace /bin/dd if=/dev/zero of=/mnt/file conv=notrunc bs=1k count=1 seek=$((2194719883264/1024)) 2>&1 | /bin/egrep "write.* 1024\) = "
/bin/umount /mnt
exit
Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>

ext4_get_blocks got renamed to ext4_map_blocks, but left stale
comments and a prototype littered around.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When journaled quota options are not specified, we do writes
to quota files just in data=ordered mode. This actually causes
warnings from JBD2 about dirty journaled buffer because ext4_getblk
unconditionally treats a block allocated by it as metadata. Since
quota actually is filesystem metadata, the easiest way to get rid
of the warning is to always treat quota writes as metadata...
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Under heavy memory pressure we may hit out of memory
situation and as result kstrdup'ed options will not be
freed. Fix it.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If the user attempts to make a non-extent-mapped file to be too large,
return EFBIG, but don't call ext4_std_err() which will end up marking
the file system as containing an error.

Thanks to Toshiyuki Okajima-san at Fujitsu for pointing this out.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

For some reason, today mballoc only allocates IOs which are exactly
stripe-sized on a stripe boundary.  If you have a multiple (say, a
128k IO on a 64k stripe) you may end up unaligned.

It seems to me that a simple change to align stripe-multiple IOs
on stripe boundaries would be a very good idea, unless this breaks
some other mballoc heuristic for some reason...
Reported-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch is to be applied upon Christoph's "direct-io: move aio_complete
into ->end_io" patch. It adds iocb and result fields to struct ext4_io_end_t,
so that we can call aio_complete from  ext4_end_io_nolock() after the extent
conversion has finished.

I have verified with Christoph's aio-dio test that used to fail after a few
runs on an original kernel but now succeeds on the patched kernel.

See http://thread.gmane.org/gmane.comp.file-systems.ext4/19659 for details.
Signed-off-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited.  That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.

This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated. 
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz> 
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Issue discard request in ext4_free_blocks() when ext4 has no journal and
is mounted with discard option.
Signed-off-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

__GFP_NOFAIL is going away, so add our own retry loop.  Also add
jbd2__journal_start() and jbd2__journal_restart() which take a gfp
mask, so that file systems can optionally (re)start transaction
handles using GFP_KERNEL.  If they do this, then they need to be
prepared to handle receiving an PTR_ERR(-ENOMEM) error, and be ready
to reflect that error up to userspace.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We have experienced bitmap inconsistencies after crash during file
delete under heavy load.  The crash is not file system related and I
the following patch in ext4_free_branches() fixes the recovery
problem.

If the transaction is restarted and there is a crash before the new
transaction is committed, then after recovery, the blocks that this
indirect block points to have been freed, but the indirect block
itself has not been freed and may still point to some of the free
blocks (because of the ext4_forget()).

So ext4_forget() should be called inside ext4_free_blocks() to avoid
this problem.
Signed-off-by: NAmir Goldstein <amir73il@users.sf.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The allocation_context pointer can be NULL.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This has been in use by e2fsprogs for a while; define it to keep the
super block fields in sync.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This allows us to grab any file system error messages by scraping
/var/log/messages.  This will make it easy for us to do error analysis
across the very large number of machines as we deploy ext4 across the
fleet.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Save number of file system errors, and the time function name, line
number, block number, and inode number of the first and most recent
errors reported on the file system in the superblock.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

    
Also start passing the line number to ext4_check_dir since we're going
to need it in upcoming patch.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This allows the error messages to include the line number
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Also use a macro definition so that __func__ and __LINE__ is implicit.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use a macro definition for ext4_abort() to clean up the .c files a wee
bit.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4 didn't update the ctime of the file when its permission was
changed.

Steps to reproduce:
 # touch aaa
 # stat -c %Z aaa
 1275289822
 # setfacl -m  'u::x,g::x,o::x' aaa
 # stat -c %Z aaa
 1275289822                         <- unchanged

But, according to the spec of the ctime, ext4 must update it.

Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>.

CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The nobh option was only supported for writeback mode, but given that all
write paths actually create buffer heads it effectively was a no-op already.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

No real bugs found, just removed some dead code.

Found by gcc 4.6's new warnings.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

These changes are not ones which are likely to result in races, but
they should be fixed.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We don't need to set s_dirt in most of the ext4 code when journaling
is enabled.  In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted.  As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt.  There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.

This patch will optimize out some unneeded disk writes when using ext4
with a journal.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  wimax/i2400m: fix missing endian correction read in fw loader
  net8139: fix a race at the end of NAPI
  pktgen: Fix accuracy of inter-packet delay.
  pkt_sched: gen_estimator: add a new lock
  net: deliver skbs on inactive slaves to exact matches
  ipv6: fix ICMP6_MIB_OUTERRORS
  r8169: fix mdio_read and update mdio_write according to hw specs
  gianfar: Revive the driver for eTSEC devices (disable timestamping)
  caif: fix a couple range checks
  phylib: Add support for the LXT973 phy.
  net: Print num_rx_queues imbalance warning only when there are allocated queues

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / x86: Save/restore MISC_ENABLE register

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: The file argument for fsync() is never null
  Btrfs: handle ERR_PTR from posix_acl_from_xattr()
  Btrfs: avoid BUG when dropping root and reference in same transaction
  Btrfs: prohibit a operation of changing acl's mask when noacl mount option used
  Btrfs: should add a permission check for setfacl
  Btrfs: btrfs_lookup_dir_item() can return ERR_PTR
  Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs
  Btrfs: unwind after btrfs_start_transaction() errors
  Btrfs: btrfs_iget() returns ERR_PTR
  Btrfs: handle kzalloc() failure in open_ctree()
  Btrfs: handle error returns from btrfs_lookup_dir_item()
  Btrfs: Fix BUG_ON for fs converted from extN
  Btrfs: Fix null dereference in relocation.c
  Btrfs: fix remap_file_pages error
  Btrfs: uninitialized data is check_path_shared()
  Btrfs: fix fallocate regression
  Btrfs: fix loop device on top of btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO

Yannick found that video does not work with 2.6.34.  The cause of this
bug was that the BIOS had assigned the wrong range to the PCI bridge
above the video device.  Before 2.6.34 the kernel would have shrunk
the size of the bridge window, but since
  d65245c3 PCI: don't shrink bridge resources
the kernel will avoid shrinking BIOS ranges.

So zero out the old range if we fail to claim it at boot time; this will
cause us to allocate a new range at startup, restoring the 2.6.34
behavior.

Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009.
Reported-by: NYannick <yannick.roehlly@free.fr>
Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.

Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...

The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
	Subsystem: Compaq Computer Corporation Device [0e11:a2f8]
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This reverts commit 75568f80.

Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.
Acked-by: NAlex Chiang <achiang@canonical.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The "file" argument for fsync is never null so we can remove this check.

What drew my attention here is that 7ea80859: "drop unused dentry
argument to ->fsync" introduced an unconditional dereference at the
start of the function and that generated a smatch warning.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to
pass null values to set_cached_acl()
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes
with end_transaction(), the cleaner kthread may come in and
drop the root in the same transaction.  If that's the case, the
root's refs still == 1 in the tree when btrfs_del_root() deletes
the item, because commit_fs_roots() hasn't updated it yet (that
happens during the commit).

This wasn't a problem before only because
btrfs_ioctl_snap_destroy() would commit the transaction before dropping
the dentry reference, so the dead root wouldn't get queued up until
after the fs root item was updated in the btree.

Since it is not an error to drop the root reference and the root in the
same transaction, just drop the BUG_ON() in btrfs_del_root().
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

when used Posix File System Test Suite(pjd-fstest) to test btrfs,
some cases about setfacl failed when noacl mount option used.
I simplified used commands in pjd-fstest, and the following steps
can reproduce it.
------------------------
# cd btrfs-part/
# mkdir aaa
# setfacl -m m::rw aaa    <- successed, but not expected by pjd-fstest.
------------------------
I checked ext3, a warning message occured, like as:
  setfacl: aaa/: Operation not supported
Certainly, it's expected by pjd-fstest.

So, i compared acl.c of btrfs and ext3. Based on that, a patch created.
Fortunately, it works.
Signed-off-by: NShi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>