- 01 3月, 2012 12 次提交
-
-
由 Greg Dietsche 提交于
Remove the enum il_calib. It defined one identifier: IL_CALIB_MAX. Remove the function il4965_calib_free_results. It was doing nothing because IL_CALIB_MAX is zero. Next, remove calib_results from the il_priv structure and also remove the associated return type/struct il_calib_result. Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Greg Dietsche 提交于
Since the menuconfig system doesn't indent the debug options for the 3945 /4965, add some text to make it clear which debug options are being configured. Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Greg Dietsche 提交于
Move the debug options so they appear below the 3945 / 4965 options. Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Instead of defining an 'enum', we can simply use 'u8' flag for WEP status. Rename 'wep_status' to 'wep_enabled' to match with 'wpa_enabled' and 'wpa2_enabled'. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
It should have been removed by commit "mwifiex: use cfg80211 dynamic scan..." (7c6fa2a8..) after adding code to avoid an extra scan during association because scan entries are valid for 15 seconds in cfg80211 stack. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The association sequence looks (roughly) like this now: * set BSSID * set station to EXIST state * send auth * set station to AUTH state * send assoc * set station to ASSOC state * set BSS info to associated In contrast, the deauth/disassoc sequence is the other way around: * clear BSSID/BSS info state * remove station * send deauth/disassoc (in some cases the last two steps are reversed.) This patch encodes the entire sequence in the ieee80211_set_disassoc() function and changes it to be like this, for good measure with an explicit flush: * send deauth/disassoc * flush * remove station * clear BSSID/BSS info state At least iwlwifi gets confused with the other sequence in P2P mode and complains that it wasn't able to flush the queues. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When ieee80211_set_disassoc() is called with the tx argument set to true, it will send DelBA out to the peer. This isn't useful or necessary in a few cases where we do it today, those being when we lost the connection or when the supplicant explicitly asked us to not tell the AP. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Instead of calling cfg80211 in ieee80211_send_deauth_disassoc() pass out the frame and call it from the caller. That saves the SKB allocation if we don't actually want to send the frame and enables us to make the ordering smarter in the future. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislav Yakovlev 提交于
It's just a duplicate of ipw2100_bg_rates[]. Signed-off-by: NStanislav Yakovlev <stas.yakovlev@gmail.com> Reviewed-by: NJulian Calaby <julian.calaby@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Florian Fainelli 提交于
I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem XG-76NA 802.11bg stick. Upon zd1211rw interface bringup (ifconfig wlan0 up) I get the following timeout: [ 950.330573] zd1211rw 1-3:1.0: phy2 [ 955.108510] zd1211rw 1-3:1.0: firmware version 4725 [ 955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70 AL2230_RF pa0 g--NS [snip] [ 955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110 A second ifconfig wlan0 up brings the interface up without problems. After a bit more debugging, the call trace is the following: [10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error ioread32(CR_REG1): -110 [10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs [10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on Adding a 10 milliseconds delay between the call to set_mc_hash() and zd_chip_switch_radio_on() allows successful interface bringups in all cases and matches what the vendor driver did. Acked-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 2月, 2012 28 次提交
-
-
由 Emmanuel Grumbach 提交于
This is a fixup for my: iwlwifi: kill iwl_bus.h Please fold them into one patch for upstream Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Update the pci subsystem id and product name for 6005 series devices Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Add new sku to 6x35 series Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
We can use forward declaration for the relevant struct since they aren't dereferenced in the header file. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Also add a might_sleep to enforce the context requirements. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
It is op_mode related Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
It is op_mode related Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
No one needs it any more Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This is temporary, but at least we can now throw the bus away and move the iwl_pci_{probe,remove} functions. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
They don't need to be in iwl-dev.h Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
The transport should not dereference the iwl_priv pointer. Remove a few of those. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Export it as "nic_error" notification, the error handling will be in the op_mode. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Export it as "hw_rf_kill" notification. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Export them as "queue_full" and "queue_not_full" notification. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This is the op_mode's Rx handler. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This handler allows the transport layer to free an skb from the op_mode. This can happen when the driver is stopped while Tx packets are pending in the transport layer. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Sparse prefers __aligned(sizeof(void *)); Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Define the op_mode as an interface with its ops. All the functions of the op_mode are "private", but its ops is made public in iwl-op-mode.h. The drv object starts the op_mode by using the start function in the public ops. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
iwl_remove stops the wifi flows, so rename. Moreover, we can possibly stop the wifi flows even if the driver is statically compiled in the kernel, so remove the __devexit pragma. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Move that code to the iwl-drv.c Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Fetch the fw and spawn the op_mode. The op_mode that we need to fetch is determined from the fw file. Since the fw is fetched very early in the init flow, we can determine what op_mode to spawn. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Johannes Berg 提交于
The uCode flags modification is op_mode dependent since the P2P config is an op-mode config. This also fixes P2P enabling: due to the uCode loading code shuffle moving the SKU check before the EEPROM was read it was always false and would always disable PAN/P2P. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This will allow to have different behavior depending on the fw. Different fw APIs require completely different implementation of the mac80211 APIs. Each of these implementations is called an op_mode. The current op_mode is called DVM which states for dual virtual MAC. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
struct iwl_fw contains a string that describe the fw. This string is now set by the iwl_parse_*_firmware. This string is later used to update the cfg80211 data. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Jakub Kicinski 提交于
Bring MCU operations during device initialization to sync with legacy driver. This should fix following error: phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jakub Kicinski 提交于
Add documentation on MCU communication, some of known commands and their arguments. Supplement command ids. Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Danny Kukawka 提交于
drivers/net/wireless/iwlwifi/iwl-core.c included 'iwl-agn.h' twice, remove the duplicate. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
The second line of a printk statement must line up to the opening bracket. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-