Instead of disabling RR scheduling of the counters, use a different list
that does not get rotated to iterate the counters on inheritance.

[ Impact: cleanup, optimization ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090520102553.237504544@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Context rotation should not occur when we are in the middle of
walking the counter list when inheriting counters ...

[ Impact: fix occasionally incorrect perf stat results ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.

The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard.  Only then are the
characteristics reported to SCSI via the VPD B1 page.

This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever.  With no complaints so far.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

At present the values we put in overflow events for the misc
flags indicating processor mode and the instruction pointer are
obtained using the standard user_mode() and
instruction_pointer() functions. Those functions tell you where
the performance monitor interrupt was taken, which might not be
exactly where the counter overflow occurred, for example
because interrupts were disabled at the point where the
overflow occurred, or because the processor had many
instructions in flight and chose to complete some more
instructions beyond the one that caused the counter overflow.

Some architectures (e.g. powerpc) can supply more precise
information about where the counter overflow occurred and the
processor mode at that point.  This introduces new functions,
perf_misc_flags() and perf_instruction_pointer(), which arch
code can override to provide more precise information if
available.  They have default implementations which are
identical to the existing code.

This also adds a new misc flag value,
PERF_EVENT_MISC_HYPERVISOR, for the case where a counter
overflow occurred in the hypervisor.  We encode the processor
mode in the 2 bits previously used to indicate user or kernel
mode; the values for user and kernel mode are unchanged and
hypervisor mode is indicated by both bits being set.

[ Impact: generalize perfcounter core facilities ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18956.1272.818511.561835@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of specifying the irq_period for a counter, provide a target interrupt
frequency and dynamically adapt the irq_period to match this frequency.

[ Impact: new perf-counter attribute/feature ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.646195868@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of a per-process mlock gift for perf-counters, use a
per-user gift so that there is less of a DoS potential.

[ Impact: allow less worst-case unprivileged memory consumption ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.496182835@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit fafd688e.

Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The current disable/enable mechanism is:

	token = hw_perf_save_disable();
	...
	/* do bits */
	...
	hw_perf_restore(token);

This works well, provided that the use nests properly. Except we don't.

x86 NMI/INT throttling has non-nested use of this, breaking things. Therefore
provide a reference counter disable/enable interface, where the first disable
disables the hardware, and the last enable enables the hardware again.

[ Impact: refactor, simplify the PMU disable/enable logic ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.
Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: NAlexander Beregalov <a.beregalov@gmail.com>
Tested-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Put generic_show_options read access to s_options under rcu_read_lock,
split save_mount_options() into "we are setting it the first time"
(uses in foo_fill_super()) and "we are relacing and freeing the old one",
synchronize_rcu() before kfree() in the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and make path_lookup_open() static
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There's no kernel-only content in it anymore, so move it to header-y
and remove the superflous #ifdef __KERNEL__.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Does equivalent of up_write(&s->s_umount); deactivate_super(s);
However, it does not does not unlock it until it's all over.
As the result, it's safe to use to dispose of new superblock on ->get_sb()
failure exits - nobody will see the sucker until it's all over.
Equivalent using up_write/deactivate_super is safe for that purpose
if superblock is either	safe to use or has NULL ->s_root when we unlock.
Normally filesystems take the required precautions, but
	a) we do have bugs in that area in some of them.
	b) up_write/deactivate_super sequence is extremely common,
so the helper makes sense anyway.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

 With Al Viro's patch to move privroot lookup to fs mount, there's no need
 to have special code to hide the privroot in reiserfs_lookup.

 I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and
 removed the last user of reiserfs_xattrs().
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

 The xattr_root caching was broken from my previous patch set. It wouldn't
 cause corruption, but could cause decreased performance due to allocating
 a larger chunk of the journal (~ 27 blocks) than it would actually use.

 This patch loads the xattr root dentry at xattr initialization and creates
 it on-demand. Since we're using the cached dentry, there's no point
 in keeping lookup_or_create_dir around, so that's removed.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... even if it's a negative dentry.  That way we can set ->d_op on
root before anyone could race with us.  Simplify d_compare(), while
we are at it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts commit 006f4571:

	This patch moves platform_data from struct device into
	struct platform_device, based on the two ideas:

	1. Now all platform_driver is registered by platform_driver_register,
	   which makes probe()/release()/... of platform_driver passed parameter
	   of platform_device *, so platform driver can get platform_data from
	   platform_device;

	2. Other kind of devices do not need to use platform_data, we can
	   decrease size of device if moving it to platform_device.

	Taking into consideration of thousands of files to be fixed and they
	can't be finished in one night(maybe it will take a long time), so we
	keep platform_data in device to allow two kind of cases coexist until
	all platform devices pass its platfrom data from
	platform_device->platform_data.

	All patches to do this kind of conversion are welcome.

As we don't really want to do it, it was a bad idea.

Cc: David Brownell <david-b@pacbell.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Allow recording the CPU number the event was generated on.

RFC: this leaves a u32 as reserved, should we fill in the
     node_id() there, or leave this open for future extention,
     as userspace can already easily do the cpu->node mapping
     if needed.

[ Impact: extend perfcounter output record format ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090508170029.008627711@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Much like CONFIG_RECORD_GROUP records the hw_event.config to
identify the values, allow to record this for all counters.

[ Impact: extend perfcounter output record format ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090508170028.923228280@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Corey noticed that ioctl()s on grouped counters didn't work on
the whole group. This extends the ioctl() interface to take a
second argument that is interpreted as a flags field. We then
provide PERF_IOC_FLAG_GROUP to toggle the behaviour.

Having this flag gives the greatest flexibility, allowing you
to individually enable/disable/reset counters in a group, or
all together.

[ Impact: fix group counter enable/disable semantics ]
Reported-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090508170028.837558214@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a threshold to relax the mlock accounting, increasing usability.

Each counter gets perf_counter_mlock_kb for free.

[ Impact: allow more mmap buffering ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090505155437.112113632@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a way to reset an existing counter - this eases PAPI
libraries around perfcounters.

Similar to read() it doesn't collapse pending child counters.

[ Impact: new perfcounter fd ioctl method to reset counters ]
Suggested-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090505155437.022272933@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Keep data_head up-to-date irrespective of notifications. This fixes
the case where you disable a counter and don't get a notification for
the last few pending events, and it also allows polling usage.

[ Impact: increase precision of perfcounter mmap-ed fields ]
Suggested-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090505155436.925084300@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes a problem when you use 32 nodes in the cluster
match:

% iptables -I PREROUTING -t mangle -i eth0 -m cluster \
  --cluster-total-nodes  32  --cluster-local-node  32 \
  --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff
iptables: Invalid argument. Run `dmesg' for more information.
% dmesg | tail -1
xt_cluster: this node mask cannot be higher than the total number of nodes

The problem is related to this checking:

if (info->node_mask >= (1 << info->total_nodes)) {
	printk(KERN_ERR "xt_cluster: this node mask cannot be "
			"higher than the total number of nodes\n");
	return false;
}

(1 << 32) is 1. Thus, the checking fails.

BTW, I said this before but I insist: I have only tested the cluster
match with 2 nodes getting ~45% extra performance in an active-active setup.
The maximum limit of 32 nodes is still completely arbitrary. I'd really
appreciate if people that have more nodes in their setups let me know.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Pointed out by Dave Miller:

  CHECK   include/linux/netfilter (57 files)
/home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This introduces a CDC Ethernet Emulation Model (EEM) host side
driver to support USB EEM devices.

EEM is different from the Ethernet Control Model (ECM) currently
supported by the "CDC Ethernet" driver.  One key difference is
that it doesn't require of USB interface alternate settings to
manage interface state; some maldesigned hardware can't handle
that part of USB.  It also avoids a separate USB interface for
control and status updates.

[ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet
checks, improve fault handling, EEM conformance updates, cleanup ]
Signed-off-by: NOmar Laazimani <omar.oberthur@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

percpu scheduling for perfcounters wants to take the context lock,
but that lock first needs to be initialized. Currently it is an
early_initcall() - but that is too late, the task tick runs much
sooner than that.

Call it explicitly from the scheduler init sequence instead.

[ Impact: fix access-before-init crash ]

LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

See http://bugzilla.kernel.org/show_bug.cgi?id=13034

If the port gets into a TIME_WAIT state, then we cannot reconnect without
binding to a new port.
Tested-by: NPetr Vandrovec <petr@vandrovec.name>
Tested-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Committed_AS field can underflow in certain situations:

>         # while true; do cat /proc/meminfo  | grep _AS; sleep 1; done | uniq -c
>               1 Committed_AS: 18446744073709323392 kB
>              11 Committed_AS: 18446744073709455488 kB
>               6 Committed_AS:    35136 kB
>               5 Committed_AS: 18446744073709454400 kB
>               7 Committed_AS:    35904 kB
>               3 Committed_AS: 18446744073709453248 kB
>               2 Committed_AS:    34752 kB
>               9 Committed_AS: 18446744073709453248 kB
>               8 Committed_AS:    34752 kB
>               3 Committed_AS: 18446744073709320960 kB
>               7 Committed_AS: 18446744073709454080 kB
>               3 Committed_AS: 18446744073709320960 kB
>               5 Committed_AS: 18446744073709454080 kB
>               6 Committed_AS: 18446744073709320960 kB

Because NR_CPUS can be greater than 1000 and meminfo_proc_show() does
not check for underflow.

But NR_CPUS proportional isn't good calculation.  In general,
possibility of lock contention is proportional to the number of online
cpus, not theorical maximum cpus (NR_CPUS).

The current kernel has generic percpu-counter stuff.  using it is right
way.  it makes code simplify and percpu_counter_read_positive() don't
make underflow issue.
Reported-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>		[All kernel versions]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some drivers using of_register_platform_driver() wrapper break on sparc
because the wrapper isn't in the header file.  This patch moves it from
Microblaze and PowerPC implementations and makes it common code.

Fixes this sparc64 allmodconfig build error (at least):

drivers/leds/leds-gpio.c: In function `gpio_led_init':
drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver'
drivers/leds/leds-gpio.c: In function `gpio_led_exit':
drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver'
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes the problem introduced by commit 3bfacef4 (get rid of
special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults
when binfmt_aout built as module.  That happens because aout binary
handler gets on the top of the binfmt list due to late registration, and
kernel attempts to execute the binary without preparatory work that must
be done by binfmt_loader.

Fixed by changing the registration order of the default binfmt handlers
using list_add_tail() and introducing insert_binfmt() function which
places new handler on the top of the binfmt list.  This might be generally
useful for installing arch-specific frontends for default handlers or just
for overriding them.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current mem_cgroup_shrink_usage() has two problems.

1. It doesn't call mem_cgroup_out_of_memory and doesn't update
   last_oom_jiffies, so pagefault_out_of_memory invokes global OOM.

2. Considering hierarchy, shrinking has to be done from the
   mem_over_limit, not from the memcg which the page would be charged to.

mem_cgroup_try_charge_swapin() does all of these things properly, so we
use it and call cancel_charge_swapin when it succeeded.

The name of "shrink_usage" is not appropriate for this behavior, so we
change it too.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h.
Discovered when hacking on virtio-over-pci patches.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When two (or more) contexts output to the same buffer, it is possible
to observe half written output.

Suppose we have CPU0 doing perf_counter_mmap(), CPU1 doing
perf_counter_overflow(). If CPU1 does a wakeup and exposes head to
user-space, then CPU2 can observe the data CPU0 is still writing.

[ Impact: fix occasionally corrupted profiling records ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090501102533.007821627@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is
missing a thread directed counterpart. Such an interface is important
for migrating applications from other OSes which have the per thread
delivery implemented.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NUlrich Drepper <drepper@redhat.com>

Original patch (dfa4411c) was buggy.
This is a more proper fix which introduces blk_rq_quiet() macro
alleviating the need for dumb, too short caching variables.

Thanks to Helge Deller and Bart for debugging this.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Reported-and-tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It's possible for character sets to require a multi-byte null
string terminator. Add a helper function that determines the size
of the null terminator at runtime.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

include/linux/mutex.h:136: warning: 'mutex_lock' declared inline after being called
 include/linux/mutex.h:136: warning: previous declaration of 'mutex_lock' was here

uninline it.

[ Impact: clean up and uninline, address compiler warning ]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <200904292318.n3TNIsi6028340@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>