This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add test to validate mqueue timeout latency from the timetest suite

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.

It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.

This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Try to streamline the makefile so its easier to add timer/timekeeping
tests.

Also adds support for the CROSS_COMPILE variable.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add a testcase for the new ppc64 memcmp.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

mpe: Fix compile errors and formatting. Add tempfile logic to Makefile.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run.  This can fool the developer into thinking
that this failed run actually completed correctly.  This commit therefore
overwrites the console.log file just before launching qemu.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed.  This commit therefore adds both to the
default qemu command line.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations.  This commit therefore
uses $NF instead of $12 to select the last (%idle) column.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor.  This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.

It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks.  In practice, memory misordering
(by both compiler and CPU) can result in false positives.  However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing.  This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: NAndrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: Ndann frazier <dann.frazier@canonical.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found.  However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected.  This commit therefore adds a check for this case.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

On 32-bit:

execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This list is supposed to be sorted, to reduce patch collisions.

Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDavid Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A security fix in caused the way the unprivileged remount tests were
using user namespaces to break.  Tweak the way user namespaces are
being used so the test works again.

Cc: stable@vger.kernel.org
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Add --verbose/-v option for showing echo output in testcases.
This is good for checking the progress of testcases which
take a longer time to run.

To implement this feature, all the testcase failures are
captured in ftracetest and send signal to set SIG_RESULT=FAIL.

Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomainSuggested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ftracetest doesn't show testcase's descriptions when
it is executed on dash. This fixes that to show the
descriptions on dash correctly by passing it via a variable
instead of directly passing the grep command output.

Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomainSigned-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This test shows the amount of memory used by the system.
Note that this is dependent on the user-space that is loaded
when this program runs.  Optimally, this program would be
run as the init program itself.

The program is optimized for size itself, to avoid conflating
its own execution with that of the system software.
The code is compiled statically, with no stdlibs. On my x86_64 system,
this results in a statically linked binary of less than 5K.
Signed-off-by: NTim Bird <tim.bird@sonymobile.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Don't prevent the test building on non-x86. Just try and build it and
let the chips fall where they may.

Add support for CROSS_COMPILE while we're at it. Also we don't need a
custom rule for building kcmp_test.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NChristopher Covington <cov@codeaurora.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

The kcmp test mucks with the include path to bring in the kernel
headers, and x86 headers too for reasons that are not clear.

Now that kcmp.h is exported none of that should be necessary.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

- MNT_NODEV should be irrelevant except when reading back mount flags,
  no longer specify MNT_NODEV on remount.

- Test MNT_NODEV on devpts where it is meaningful even for unprivileged mounts.

- Add a test to verify that remount of a prexisting mount with the same flags
  is allowed and does not change those flags.

- Cleanup up the definitions of MS_REC, MS_RELATIME, MS_STRICTATIME that are used
  when the code is built in an environment without them.

- Correct the test error messages when tests fail.  There were not 5 tests
  that tested MS_RELATIME.

Cc: stable@vger.kernel.org
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Also, adjust the formatting a bit, and expand the section about using
TARGETS= on the make command line.
Signed-off-by: NTim Bird <tim.bird@sonymobile.com>
Acked-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Change timers test to use kselftest framework to report
test results.
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>