* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (32 commits)
  [CIFS] Fix double list addition in cifs posix open code
  [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp
  [CIFS] Fix SMB uid in NTLMSSP authenticate request
  [CIFS] NTLMSSP reenabled after move from connect.c to sess.c
  [CIFS] Remove sparse warning
  [CIFS] remove checkpatch warning
  [CIFS] Fix final user of old string conversion code
  [CIFS] remove cifs_strfromUCS_le
  [CIFS] NTLMSSP support moving into new file, old dead code removed
  [CIFS] Fix endian conversion of vcnum field
  [CIFS] Remove trailing whitespace
  [CIFS] Remove sparse endian warnings
  [CIFS] Add remaining ntlmssp flags and standardize field names
  [CIFS] Fix build warning
  cifs: fix length handling in cifs_get_name_from_search_buf
  [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status
  [CIFS] rename cifs_strndup to cifs_strndup_from_ucs
  Added loop check when mounting DFS tree.
  Enable dfs submounts to handle remote referrals.
  [CIFS] Remove older session setup implementation
  ...

Remove adding open file entry twice to lists in the file
Do not fill file info twice in case of posix opens and creates
Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Don't check vm_region::vm_start is page aligned in add_nommu_region() because
the region may reflect some non-page-aligned mapped file, such as could be
obtained from RomFS XIP.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: remove rd%d links immediately after stopping an array.
  md: remove ability to explicit set an inactive array to 'clean'.
  md: constify VFTs
  md: tidy up status_resync to handle large arrays.
  md: fix some (more) errors with bitmaps on devices larger than 2TB.
  md/raid10: don't clear bitmap during recovery if array will still be degraded.
  md: fix loading of out-of-date bitmap.

It's a really simple patch that basically just open-codes the current
"secure_ip_id()" call, but when open-coding it we now use a _static_
hashing area, so that it gets updated every time.

And to make sure somebody can't just start from the same original seed of
all-zeroes, and then do the "half_md4_transform()" over and over until
they get the same sequence as the kernel has, each iteration also mixes in
the same old "current->pid + jiffies" we used - so we should now have a
regular strong pseudo-number generator, but we also have one that doesn't
have a single seed.

Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It
has no real meaning. It could be anything. I just picked the previous
seed, it's just that now we keep the state in between calls and that will
feed into the next result, and that should make all the difference.

I made that hash be a per-cpu data just to avoid cache-line ping-pong:
having multiple CPU's write to the same data would be fine for randomness,
and add yet another layer of chaos to it, but since get_random_int() is
supposed to be a fast interface I did it that way instead. I considered
using "__raw_get_cpu_var()" to avoid any preemption overhead while still
getting the hash be _mostly_ ping-pong free, but in the end good taste won
out.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
  [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
  i.MX31: Disable CPU_32v6K in mx3_defconfig.
  mx3fb: Fix compilation with CONFIG_PM
  mx27ads: move PBC mapping out of vmalloc space
  MXC: remove BUG_ON in interrupt handler
  mx31: remove mx31moboard_defconfig
  ARM: ARCH_MXC should select HAVE_CLK
  mxc : BUG in imx_dma_request
  mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
  [ARM] mv78xx0: update defconfig
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".
  [ARM] S3C2412: Add missing cache flush in suspend code
  [ARM] S3C: Add UDIVSLOT support for newer UARTS
  [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>

From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.
Signed-off-by: NDavid Borman <david.borman@windriver.com>
Signed-off-by: NBruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As per commit 284901a9, use
DMA_BIT_MASK(n)
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

md maintains link in sys/mdXX/md/ to identify which device has
which role in the array. e.g.
   rd2 -> dev-sda

indicates that the device with role '2' in the array is sda.

These links are only present when the array is active.  They are
created immediately after ->run is called, and so should be removed
immediately after ->stop is called.
However they are currently removed a little bit later, and it is
possible for ->run to be called again, thus adding these links, before
they are removed.

So move the removal earlier so they are consistently only present when
the array is active.
Signed-off-by: NNeilBrown <neilb@suse.de>

Being able to write 'clean' to an 'array_state' of an inactive array
to activate it in 'clean' mode is both unnecessary and inconvenient.

It is unnecessary because the same can be achieved by writing
'active'.  This activates and array, but it still remains 'clean'
until the first write.

It is inconvenient because writing 'clean' is more often used to
cause an 'active' array to revert to 'clean' mode (thus blocking
any writes until a 'write-pending' is promoted to 'active').

Allowing 'clean' to both activate an array and mark an active array as
clean can lead to races:  One program writes 'clean' to mark the
active array as clean at the same time as another program writes
'inactive' to deactivate (stop) and active array.  Depending on which
writes first, the array could be deactivated and immediately
reactivated which isn't what was desired.

So just disable the use of 'clean' to activate an array.

This avoids a race that can be triggered with mdadm-3.0 and external
metadata, so it suitable for -stable.
Reported-by: NRafal Marszewski <rafal.marszewski@intel.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NNeilBrown <neilb@suse.de>

Two problems in status_resync.
1/ It still used Kilobytes as the basic block unit, while most code
   now uses sectors uniformly.
2/ It doesn't allow for the possibility that max_sectors exceeds
   the range of "unsigned long".

So
 - change "max_blocks" to "max_sectors", and store sector numbers
   in there and in 'resync'
 - Make 'rt' a 'sector_t' so it can temporarily hold the number of
   remaining sectors.
 - use sector_div rather than normal division.
 - change the magic '100' used to preserve precision to '32'.
   + making it a power of 2 makes division easier
   + it doesn't need to be as large as it was chosen when we averaged
     speed over the entire run.  Now we average speed over the last 30
     seconds or so.
Reported-by: N"Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: NNeilBrown <neilb@suse.de>

If a write intent bitmap covers more than 2TB, we sometimes work with
values beyond 32bit, so these need to be sector_t.  This patches
add the required casts to some unsigned longs that are being shifted
up.

This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with
member devices that are larger than 2TB.
Signed-off-by: NNeilBrown <neilb@suse.de>
Reported-by: N"Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Cc: stable@kernel.org

If we have a raid10 with multiple missing devices, and we recover just
one of these to a spare, then we risk (depending on the bitmap and
array chunk size) clearing bits of the bitmap for which recovery isn't
complete (because a device is still missing).

This can lead to a subsequent "re-add" being recovered without
any IO happening, which would result in loss of data.

This patch takes the safe approach of not clearing bitmap bits
if the array will still be degraded.

This patch is suitable for all active -stable kernels.

Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>

When md is loading a bitmap which it knows is out of date, it fills
each page with 1s and writes it back out again.  However the
write_page call makes used of bitmap->file_pages and
bitmap->last_page_size which haven't been set correctly yet.  So this
can sometimes fail.

Move the setting of file_pages and last_page_size to before the call
to write_page.

This bug can cause the assembly on an array to fail, thus making the
data inaccessible.  Hence I think it is a suitable candidate for
-stable.

Cc: stable@kernel.org
Reported-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NNeilBrown <neilb@suse.de>

Fix zillions of -mm x86_64 allmodconfig build errors - the file uses
EXPORT_SYMBOL() and kmalloc but misses the needed includes.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the removal of duplicate unpack_to_rootfs() (commit
df52092f) the messages displayed do not
actually correspond to what the kernel is doing.  In addition, depending
if ramdisks are supported or not, the messages are not at all the same.

So keep the messages more in sync with what is really doing the kernel,
and only display a second message in case of failure.  This also ensure
that the printk message cannot be split by other printk's.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NOMMU mmap() has an option controlled by a sysctl variable that determines
whether the allocations made by do_mmap_private() should have the excess
space trimmed off and returned to the allocator.  Make the initial setting
of this variable a Kconfig configuration option.

The reason there can be excess space is that the allocator only allocates
in power-of-2 size chunks, but mmap()'s can be made in sizes that aren't a
power of 2.

There are two alternatives:

 (1) Keep the excess as dead space.  The dead space then remains unused for the
     lifetime of the mapping.  Mappings of shared objects such as libc, ld.so
     or busybox's text segment may retain their dead space forever.

 (2) Return the excess to the allocator.  This means that the dead space is
     limited to less than a page per mapping, but it means that for a transient
     process, there's more chance of fragmentation as the excess space may be
     reused fairly quickly.

During the boot process, a lot of transient processes are created, and
this can cause a lot of fragmentation as the pagecache and various slabs
grow greatly during this time.

By turning off the trimming of excess space during boot and disabling
batching of frees, Coldfire can manage to boot.

A better way of doing things might be to have /sbin/init turn this option
off.  By that point libc, ld.so and init - which are all long-duration
processes - have all been loaded and trimmed.
Reported-by: NLanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NLanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clamp zone_batchsize() to 0 under NOMMU conditions to stop
free_hot_cold_page() from queueing and batching frees.

The problem is that under NOMMU conditions it is really important to be
able to allocate large contiguous chunks of memory, but when munmap() or
exit_mmap() releases big stretches of memory, return of these to the buddy
allocator can be deferred, and when it does finally happen, it can be in
small chunks.

Whilst the fragmentation this incurs isn't so much of a problem under MMU
conditions as userspace VM is glued together from individual pages with
the aid of the MMU, it is a real problem if there isn't an MMU.

By clamping the page freeing queue size to 0, pages are returned to the
allocator immediately, and the buddy detector is more likely to be able to
glue them together into large chunks immediately, and fragmentation is
less likely to occur.

By disabling batching of frees, and by turning off the trimming of excess
space during boot, Coldfire can manage to boot.
Reported-by: NLanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NLanttor Guo <lanttor.guo@freescale.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use roundown_pow_of_two(N) in zone_batchsize() rather than (1 <<
(fls(N)-1)) as they are equivalent, and with the former it is easier to
see what is going on.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NLanttor Guo <lanttor.guo@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The isl29003 does not interpret the return value of
i2c_smbus_write_byte_data() correctly and hence causes an error on system
resume.

Also introduce power_state_before_suspend and restore the chip's power
state upon wakeup.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The cyblafb driver is removed so remove its last trace in the makefile.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If alloc_vmap_area() fails the allocated struct vmap_area has to be freed.
Signed-off-by: NRalph Wuerthner <ralphw@linux.vnet.ibm.com>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change last "i386" to X86-32 as is used throughout the rest of the file.
Change combination of X86-32,X86-64 to just X86, as is done throughout the
rest of the file.

Add a note that hyphens and underscores are equivalent in parameter names,
with examples.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Christopher Sylvain <chris.sylvain@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The software fillrect routines do not work properly when the number of
pixels per machine word is not an integer.  To see that, run the following
command on a fbdev console with a 24bpp video mode, using a
non-accelerated driver such as (u)vesafb:

  reset ; echo -e '\e[41mtest\e[K'

The expected result is 'test' displayed on a line with red background.
Instead of that, 'test' has a red background, but the rest of the line
(rendered using fillrect()) contains a distored colorful pattern.

This patch fixes the problem by correctly computing rotation shifts.  It
has been tested in a 24bpp mode on 32- and 64-bit little-endian machines.
Signed-off-by: NMichal Januszewski <spock@gentoo.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When /proc/sys/vm/oom_kill_allocating_task is set for large systems that
want to avoid the lengthy tasklist scan, it's possible to livelock if
current is ineligible for oom kill.  This normally happens when it is set
to OOM_DISABLE, but is also possible if any threads are sharing the same
->mm with a different tgid.

So change __out_of_memory() to fall back to the full task-list scan if it
was unable to kill `current'.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a problem where the generic block based fiemap stuff would not
properly set FIEMAP_EXTENT_LAST on the last extent.  I've reworked things
to keep track if we go past the EOF, and mark the last extent properly.
The problem was reported by and tested by Eric Sandeen.
Tested-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-btrfs@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When building with gcc 3.2 I get thousands of warnings such as

include/linux/gfp.h: In function `allocflags_to_migratetype':
include/linux/gfp.h:105: warning: null format string

due to passing a NULL format string to warn_slowpath() in

#define __WARN()		warn_slowpath(__FILE__, __LINE__, NULL)

Split this case out into a separate call.  This also shrinks the kernel
slightly:

          text    data     bss     dec     hex filename
       4802274  707668  712704 6222646  5ef336 vmlinux
          text    data     bss     dec     hex filename
       4799027  703572  712704 6215303  5ed687 vmlinux

due to removeing one argument from the commonly-called __WARN().

[akpm@linux-foundation.org: reduce scope of `empty']
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kernel boot parameter `hashdist' now defaults on for all 64bit NUMA.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is what we believe to be a false positive reported by lockdep.

inotify_inode_queue_event() => take inotify_mutex => kernel_event() =>
kmalloc() => SLOB => alloc_pages_node() => page reclaim => slab reclaim =>
dcache reclaim => inotify_inode_is_dead => take inotify_mutex => deadlock

The plan is to fix this via lockdep annotation, but that is proving to be
quite involved.

The patch flips the allocation over to GFP_NFS to shut the warning up, for
the 2.6.30 release.

Hopefully we will fix this for real in 2.6.31.  I'll queue a patch in -mm
to switch it back to GFP_KERNEL so we don't forget.

  =================================
  [ INFO: inconsistent lock state ]
  2.6.30-rc2-next-20090417 #203
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/380 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&inode->inotify_mutex){+.+.?.}, at: [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
  {RECLAIM_FS-ON-W} state was registered at:
    [<ffffffff81079188>] mark_held_locks+0x68/0x90
    [<ffffffff810792a5>] lockdep_trace_alloc+0xf5/0x100
    [<ffffffff810f5261>] __kmalloc_node+0x31/0x1e0
    [<ffffffff81130652>] kernel_event+0xe2/0x190
    [<ffffffff81130826>] inotify_dev_queue_event+0x126/0x230
    [<ffffffff8112f096>] inotify_inode_queue_event+0xc6/0x110
    [<ffffffff8110444d>] vfs_create+0xcd/0x140
    [<ffffffff8110825d>] do_filp_open+0x88d/0xa20
    [<ffffffff810f6b68>] do_sys_open+0x98/0x140
    [<ffffffff810f6c50>] sys_open+0x20/0x30
    [<ffffffff8100c272>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
  irq event stamp: 690455
  hardirqs last  enabled at (690455): [<ffffffff81564fe4>] _spin_unlock_irqrestore+0x44/0x80
  hardirqs last disabled at (690454): [<ffffffff81565372>] _spin_lock_irqsave+0x32/0xa0
  softirqs last  enabled at (690178): [<ffffffff81052282>] __do_softirq+0x202/0x220
  softirqs last disabled at (690157): [<ffffffff8100d50c>] call_softirq+0x1c/0x50

  other info that might help us debug this:
  2 locks held by kswapd0/380:
   #0:  (shrinker_rwsem){++++..}, at: [<ffffffff810d0bd7>] shrink_slab+0x37/0x180
   #1:  (&type->s_umount_key#17){++++..}, at: [<ffffffff8110cfbf>] shrink_dcache_memory+0x11f/0x1e0

  stack backtrace:
  Pid: 380, comm: kswapd0 Not tainted 2.6.30-rc2-next-20090417 #203
  Call Trace:
   [<ffffffff810789ef>] print_usage_bug+0x19f/0x200
   [<ffffffff81018bff>] ? save_stack_trace+0x2f/0x50
   [<ffffffff81078f0b>] mark_lock+0x4bb/0x6d0
   [<ffffffff810799e0>] ? check_usage_forwards+0x0/0xc0
   [<ffffffff8107b142>] __lock_acquire+0xc62/0x1ae0
   [<ffffffff810f478c>] ? slob_free+0x10c/0x370
   [<ffffffff8107c0a1>] lock_acquire+0xe1/0x120
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81562d43>] mutex_lock_nested+0x63/0x420
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8112f1b5>] ? inotify_inode_is_dead+0x35/0xb0
   [<ffffffff81012fe9>] ? sched_clock+0x9/0x10
   [<ffffffff81077165>] ? lock_release_holdtime+0x35/0x1c0
   [<ffffffff8112f1b5>] inotify_inode_is_dead+0x35/0xb0
   [<ffffffff8110c9dc>] dentry_iput+0xbc/0xe0
   [<ffffffff8110cb23>] d_kill+0x33/0x60
   [<ffffffff8110ce23>] __shrink_dcache_sb+0x2d3/0x350
   [<ffffffff8110cffa>] shrink_dcache_memory+0x15a/0x1e0
   [<ffffffff810d0cc5>] shrink_slab+0x125/0x180
   [<ffffffff810d1540>] kswapd+0x560/0x7a0
   [<ffffffff810ce160>] ? isolate_pages_global+0x0/0x2c0
   [<ffffffff81065a30>] ? autoremove_wake_function+0x0/0x40
   [<ffffffff8107953d>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff810d0fe0>] ? kswapd+0x0/0x7a0
   [<ffffffff8106555b>] kthread+0x5b/0xa0
   [<ffffffff8100d40a>] child_rip+0xa/0x20
   [<ffffffff8100cdd0>] ? restore_args+0x0/0x30
   [<ffffffff81065500>] ? kthread+0x0/0xa0
   [<ffffffff8100d400>] ? child_rip+0x0/0x20

[eparis@redhat.com: fix audit too]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes bd_lock spinlock (inside jsm_board structure).
The lock is initialized in the probe function and not used anymore.
Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is one area where we can't just magic away the bizarre use of
CLOCK_TICK_RATE as it leaks to user space APIs. It also means the visible
CLOCK_TICK_RATE is frozen for architectures which is horrible.

We need to fix this somehow
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).
Signed-off-by: NSteve French <sfrench@us.ibm.com>

We were not setting the SMB uid in NTLMSSP authenticate
request which could lead to INVALID_PARAMETER error
on 2nd session setup.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/r128: fix r128 ioremaps to use ioremap_wc.
  drm: cleanup properly in drm_get_dev() failure paths
  drm: clean the map list before destroying the hash table
  drm: remove unreachable code in drm_sysfs.c
  drm: add control node checks missing from kms merge
  drm/kms: don't try to shortcut drm mode set function
  drm/radeon: bump minor version for occlusion queries support

This should allow r128 to start working again since PAT changes.

taken from F-11 kernel.
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] xen_domu_defconfig: fix build issues/warnings

madvise(MADV_WILLNEED) forces page cache readahead on a range of memory
backed by a file.  The assumption is made that the page required is
order-0 and "normal" page cache.

On hugetlbfs, this assumption is not true and order-0 pages are
allocated and inserted into the hugetlbfs page cache.  This leaks
hugetlbfs page reservations and can cause BUGs to trigger related to
corrupted page tables.

This patch causes MADV_WILLNEED to be ignored for hugetlbfs-backed
regions.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'timers/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: prevent endless loop in tick_handle_periodic()

* 'irq/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "genirq: assert that irq handlers are indeed running in hardirq context"