Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") in v3.18
enabled -msoft-float and sprinkled ".set hardfloat" where necessary to
use FP instructions. However it missed enable_restore_fp_context() which
since v3.17 does a ctc1 with inline assembly, causing the following
assembler errors on Mentor's 2014.05 toolchain:

{standard input}: Assembler messages:
{standard input}:2913: Error: opcode not supported on this processor: mips32r2 (mips32r2) `ctc1 $2,$31'
scripts/Makefile.build:257: recipe for target 'arch/mips/kernel/traps.o' failed

Fix that to use the new write_32bit_cp1_register() macro so that ".set
hardfloat" is automatically added when -msoft-float is in use.

Fixes 842dfc11 ("MIPS: Fix build with binutils 2.24.51+")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.18+, depends on "MIPS: mipsregs.h: Add write_32bit_cp1_register()"
Patchwork: https://patchwork.linux-mips.org/patch/9173/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a write_32bit_cp1_register() macro to compliment the
read_32bit_cp1_register() macro. This is to abstract whether .set
hardfloat needs to be used based on GAS_HAS_SET_HARDFLOAT.

The implementation of _read_32bit_cp1_register() .sets mips1 due to
failure of gas v2.19 to assemble cfc1 for Octeon (see commit
25c30003 ("MIPS: Override assembler target architecture for
octeon.")). I haven't copied this over to _write_32bit_cp1_register() as
I'm uncertain whether it applies to ctc1 too, or whether anybody cares
about that version of binutils any longer.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9172/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As printk() invocation can cause e.g. a TLB miss, printk() cannot be
called before the exception handlers have been properly initialized.
This can happen e.g. when netconsole has been loaded as a kernel module
and the TLB table has been cleared when a CPU was offline.

Call cpu_report() in start_secondary() only after the exception handlers
have been initialized to fix this.

Without the patch the kernel will randomly either lockup or crash
after a CPU is onlined and the console driver is a module.
Signed-off-by: NHemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8953/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

octeon_cpu_disable() will unconditionally enable interrupts when called.
We can assume that the routine is always called with interrupts disabled,
so just delete the incorrect local_irq_disable/enable().

The patch fixes the following crash when offlining a CPU:

[   93.818785] ------------[ cut here ]------------
[   93.823421] WARNING: CPU: 1 PID: 10 at kernel/smp.c:231 flush_smp_call_function_queue+0x1c4/0x1d0()
[   93.836215] Modules linked in:
[   93.839287] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.19.0-rc4-octeon-los_b5f0 #1
[   93.847212] Stack : 0000000000000001 ffffffff81b2cf90 0000000000000004 ffffffff81630000
	  0000000000000000 0000000000000000 0000000000000000 000000000000004a
	  0000000000000006 ffffffff8117e550 0000000000000000 0000000000000000
	  ffffffff81b30000 ffffffff81b26808 8000000032c77748 ffffffff81627e07
	  ffffffff81595ec8 ffffffff81b26808 000000000000000a 0000000000000001
	  0000000000000001 0000000000000003 0000000010008ce1 ffffffff815030c8
	  8000000032cbbb38 ffffffff8113d42c 0000000010008ce1 ffffffff8117f36c
	  8000000032c77300 8000000032cbba50 0000000000000001 ffffffff81503984
	  0000000000000000 0000000000000000 0000000000000000 0000000000000000
	  0000000000000000 ffffffff81121668 0000000000000000 0000000000000000
	  ...
[   93.912819] Call Trace:
[   93.915273] [<ffffffff81121668>] show_stack+0x68/0x80
[   93.920335] [<ffffffff81503984>] dump_stack+0x6c/0x90
[   93.925395] [<ffffffff8113d58c>] warn_slowpath_common+0x94/0xd8
[   93.931324] [<ffffffff811a402c>] flush_smp_call_function_queue+0x1c4/0x1d0
[   93.938208] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108
[   93.943444] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8
[   93.949286] [<ffffffff8113d704>] cpu_notify+0x24/0x60
[   93.954348] [<ffffffff81501738>] take_cpu_down+0x38/0x58
[   93.959670] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180
[   93.965250] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160
[   93.971093] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8
[   93.976936] [<ffffffff8115ab04>] kthread+0xd4/0xf0
[   93.981735] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c
[   93.987835]
[   93.989326] ---[ end trace c9e3815ee655bda9 ]---
[   93.993951] Kernel bug detected[#1]:
[   93.997533] CPU: 1 PID: 10 Comm: migration/1 Tainted: G        W      3.19.0-rc4-octeon-los_b5f0 #1
[   94.006591] task: 8000000032c77300 ti: 8000000032cb8000 task.ti: 8000000032cb8000
[   94.014081] $ 0   : 0000000000000000 0000000010000ce1 0000000000000001 ffffffff81620000
[   94.022146] $ 4   : 8000000002c72ac0 0000000000000000 00000000000001a7 ffffffff813b06f0
[   94.030210] $ 8   : ffffffff813b20d8 0000000000000000 0000000000000000 ffffffff81630000
[   94.038275] $12   : 0000000000000087 0000000000000000 0000000000000086 0000000000000000
[   94.046339] $16   : ffffffff81623168 0000000000000001 0000000000000000 0000000000000008
[   94.054405] $20   : 0000000000000001 0000000000000001 0000000000000001 0000000000000003
[   94.062470] $24   : 0000000000000038 ffffffff813b7f10
[   94.070536] $28   : 8000000032cb8000 8000000032cbbc20 0000000010008ce1 ffffffff811bcaf4
[   94.078601] Hi    : 0000000000f188e8
[   94.082179] Lo    : d4fdf3b646c09d55
[   94.085760] epc   : ffffffff811bc9d0 irq_work_run_list+0x8/0xf8
[   94.091686]     Tainted: G        W
[   94.095613] ra    : ffffffff811bcaf4 irq_work_run+0x34/0x60
[   94.101192] Status: 10000ce3	KX SX UX KERNEL EXL IE
[   94.106235] Cause : 40808034
[   94.109119] PrId  : 000d9301 (Cavium Octeon II)
[   94.113653] Modules linked in:
[   94.116721] Process migration/1 (pid: 10, threadinfo=8000000032cb8000, task=8000000032c77300, tls=0000000000000000)
[   94.127168] Stack : 8000000002c74c80 ffffffff811a4128 0000000000000001 ffffffff81635720
	  fffffffffffffff2 ffffffff8115bacc 80000000320fbce0 80000000320fbca4
	  80000000320fbc80 0000000000000002 0000000000000004 ffffffff8113d704
	  80000000320fbce0 ffffffff81501738 0000000000000003 ffffffff811b343c
	  8000000002c72aa0 8000000002c72aa8 ffffffff8159cae8 ffffffff8159caa0
	  ffffffff81650000 80000000320fbbf0 80000000320fbc80 ffffffff811b32e8
	  0000000000000000 ffffffff811b3768 ffffffff81622b80 ffffffff815148a8
	  8000000032c77300 8000000002c73e80 ffffffff815148a8 8000000032c77300
	  ffffffff81622b80 ffffffff815148a8 8000000032c77300 ffffffff81503f48
	  ffffffff8115ea0c ffffffff81620000 0000000000000000 ffffffff81174d64
	  ...
[   94.192771] Call Trace:
[   94.195222] [<ffffffff811bc9d0>] irq_work_run_list+0x8/0xf8
[   94.200802] [<ffffffff811bcaf4>] irq_work_run+0x34/0x60
[   94.206036] [<ffffffff811a4128>] hotplug_cfd+0xf0/0x108
[   94.211269] [<ffffffff8115bacc>] notifier_call_chain+0x5c/0xb8
[   94.217111] [<ffffffff8113d704>] cpu_notify+0x24/0x60
[   94.222171] [<ffffffff81501738>] take_cpu_down+0x38/0x58
[   94.227491] [<ffffffff811b343c>] multi_cpu_stop+0x154/0x180
[   94.233072] [<ffffffff811b3768>] cpu_stopper_thread+0xd8/0x160
[   94.238914] [<ffffffff8115ea4c>] smpboot_thread_fn+0x1ec/0x1f8
[   94.244757] [<ffffffff8115ab04>] kthread+0xd4/0xf0
[   94.249555] [<ffffffff8111c4f0>] ret_from_kernel_thread+0x14/0x1c
[   94.255654]
[   94.257146]
Code: a2423c40  40026000  30420001 <00020336> dc820000  10400037  00000000  0000010f  0000010f
[   94.267183] ---[ end trace c9e3815ee655bdaa ]---
[   94.271804] Fatal exception: panic in 5 seconds
Reported-by: NHemmo Nieminen <hemmo.nieminen@iki.fi>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: stable@vger.kernel.org # v3.18+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8952/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[...]
 struct component {
        ^
In file included from ./arch/mips/include/asm/sn/klconfig.h:58:0,
                 from ./arch/mips/include/asm/sn/module.h:12,
                 from ./arch/mips/include/asm/sn/node.h:8,
                 from ./arch/mips/include/asm/mach-ip35/mmzone.h:4,
                 from ./arch/mips/include/asm/mmzone.h:9,
                 from ./arch/mips/include/asm/mach-ip35/topology.h:7,
                 from ./arch/mips/include/asm/topology.h:11,
                 from include/linux/topology.h:35,
                 from include/linux/gfp.h:8,
                 from include/linux/device.h:29,
                 from drivers/base/component.c:14:
./arch/mips/include/asm/fw/arc/hinv.h:122:16: note: originally defined here
 typedef struct component {
                ^
make[2]: *** [drivers/base/component.o] Error 1
make[2]: Target `__build' not remade because of errors.
make[1]: *** [drivers/base] Error 2
make[1]: Target `__build' not remade because of errors.

Fix by using an nameless struct definition in the COMPONENT definition.
Which is what the ARC spec uses anyway.  While at it, do the same thing
for two other typedefs.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If the irq_chip does not define .irq_disable, any call to disable_irq
will defer disabling the IRQ until it fires while marked as disabled.
This assumes that the handler function checks for this condition, which
handle_percpu_irq does not. In this case, calling disable_irq leads to
an IRQ storm, if the interrupt fires while disabled.

This optimization is only useful when disabling the IRQ is slow, which
is not true for the MIPS CPU IRQ.

Disable this optimization by implementing .irq_disable and .irq_enable
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8949/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 18743d27 ("irqchip: mips-gic: Stop using per-platform mapping
tables") in v3.19-rc1 changed the routing of IPIs through the GIC to go
to the HW0 IRQ pin along with the rest of the GIC interrupts, rather
than to HW1 and HW2 pins.

This breaks SMP boot using the CMP or MT SMP implementations because HW0
doesn't get unmasked when secondary CPUs are initialised so the IPIs
will never interrupt secondary CPUs (nor any other interrupts routed
through the GIC).

Commit ff1e29ad ("MIPS: smp-cps: Enable all hardware interrupts on
secondary CPUs") fixed this in advance for the CPS SMP implementation by
unmasking all hardware interrupt lines for secondary CPUs, so lets do
the same for the CMP and MT implementations.

Fixes: 18743d27 ("irqchip: mips-gic: Stop using per-platform mapping tables")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9025/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When 32-bit MIPS userspace invokes a syscall indirectly via syscall(number,
arg1, ..., arg7), the kernel looks up the actual syscall based on the given
number, shifts the other arguments to the left, and jumps to the syscall.

If the syscall is interrupted by a signal and indicates it needs to be
restarted by the kernel (by returning ERESTARTNOINTR for example), the
syscall must be called directly, since the number is no longer the first
argument, and the other arguments are now staged for a direct call.

Before shifting the arguments, store the syscall number in pt_regs->regs[2].
This gets copied temporarily into pt_regs->regs[0] after the syscall returns.
If the syscall needs to be restarted, handle_signal()/do_signal() copies the
number back to pt_regs->reg[2], which ends up in $v0 once control returns to
userspace.
Signed-off-by: NEd Swierk <eswierk@skyportsystems.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8929/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 90cee759 ("MIPS: ELF: Set FP mode according to .MIPS.abiflags")
introduced checking of the .MIPS.abiflags ELF section but did so through
the native sized "elfhdr" and "elf_phdr" structures regardless whether the
ELF was actually 32-bit or 64-bit. This produces wrong results when trying
to use a 64-bit kernel to load o32 ELF files.

Change the uses of the generic elf structures to their 32-bit versions.
Since the code bails out on any 64-bit cases, this is OK until they are
implemented.

Fixes: 90cee759 ("MIPS: ELF: Set FP mode according to .MIPS.abiflags")
Signed-off-by: NJames Cowgill <James.Cowgill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: NMaciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8932/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Sparse emits a bunch of warnings in mips-cm.h due to casting away of
__iomem by the addr_gcr_*() functions:

arch/mips/include/asm/mips-cm.h:134:1: warning: cast removes address space of expression

And subsequent passing of the return values to __raw_readl() and
__raw_writel() in the read_gcr_*() and write_gcr_*() functions:

arch/mips/include/asm/mips-cm.h:134:1: warning: incorrect type in argument 2 (different address spaces)
arch/mips/include/asm/mips-cm.h:134:1:    expected void volatile [noderef] <asn:2>*mem
arch/mips/include/asm/mips-cm.h:134:1:    got unsigned int [usertype] *
arch/mips/include/asm/mips-cm.h:134:1: warning: incorrect type in argument 1 (different address spaces)
arch/mips/include/asm/mips-cm.h:134:1:    expected void const volatile [noderef] <asn:2>*mem
arch/mips/include/asm/mips-cm.h:134:1:    got unsigned int [usertype] *

Fix by adding __iomem to the addr_gcr_*() return type and cast.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8874/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[...]
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
arch/mips/Kconfig:2681:error: recursive dependency detected!
arch/mips/Kconfig:2681:	symbol MIPS32_N32 depends on MIPS32_COMPAT
arch/mips/Kconfig:2658:	symbol MIPS32_COMPAT is selected by MIPS32_N32

Introduced by d74473bdf7a4c1ef7ae2b75f585fe5649ac2dcea (MIPS: Compat: Fix
build error if CONFIG_MIPS32_COMPAT but no compat ABI.)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In that case nor __NR_seccomp_*_32 symbols will be defined in
<asm/unistd.h> so the attempt to use it in kernel.seccomp.c will fail
with:

kernel/seccomp.c:565:2: error: '__NR_seccomp_read_32' undeclared here (not in a function)
  __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
  ^
kernel/seccomp.c:565:24: error: '__NR_seccomp_write_32' undeclared here (not in a function)
  __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
                        ^
kernel/seccomp.c:565:47: error: '__NR_seccomp_exit_32' undeclared here (not in a function)
  __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
                                               ^
kernel/seccomp.c:565:69: error: '__NR_seccomp_sigreturn_32' undeclared here (not in a function)
  __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,

Solved by changing the compat ABIs in kconfig to select MIPS32_COMPAT
directly.  This also means the user no longer has to select MIPS32_COMPAT
before being able to see the ABI options.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fixes sparse warnings:

  arch/mips/jz4740/irq.c:63:6: warning: symbol 'jz4740_irq_suspend' was not declared. Should it be static?
  arch/mips/jz4740/irq.c:69:6: warning: symbol 'jz4740_irq_resume' was not declared. Should it be static?

Also, I've seen some elusive build errors on my automated build test
where JZ4740_IRQ_BASE and NR_IRQS are missing, but I can't reproduce
them manually for some reason. Anyway, mach-jz4740/irq.h should help us
avoid relying on some implicit include.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8724/Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In particular the use of the antiquated PIX PATA drivers was a nuiscance
since most userland has switched to the new /dev/sda drivers as well as
the lack of EXT4.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 4227a2d4 (MIPS: Support for hybrid
FPRs) changes the kernel to execute read_c0_config5() even on processors
that don't have a Config5 register.  According to the arch spec the
behaviour of trying to read or write this register is UNDEFINED where this
register doesn't exist, that is merely looking at this register is
already cruel because that might kill a kitten.

In case of Qemu older than v2.2 Qemu has elected to implement this
UNDEFINED behaviour by taking a RI exception - which then fries the
kernel:

[...]
Freeing YAMON memory: 956k freed
Freeing unused kernel memory: 240K (80674000 - 806b0000)
Reserved instruction in kernel code[#1]:
CPU: 0 PID: 1 Comm: init Not tainted 3.18.0-rc6-00058-g4227a2d4 #26
task: 86047588 ti: 86048000 task.ti: 86048000
$ 0   : 00000000 77a638cc 00000000 00000000
[...]

For qemu v2.2.0 commit f31b035a9f10dc9b57f01c426110af845d453ce2
(target-mips: correctly handle access to unimplemented CP0 register)
changed the behaviour to returning zero on read and ignoring writes
which more matches how typical hardware implementations actually behave.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pull ARM fixes from Russell King:
 "Three small fixes from over the Christmas period, and wiring up the
  new execveat syscall for ARM"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
  ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
  ARM: 8249/1: mm: dump: don't skip regions
  ARM: wire up execveat syscall

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
  with certain odd memory mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Use asm volatile in __getcpu
  x86/build: Clean auto-generated processor feature files
  x86: Fix mkcapflags.sh bash-ism
  x86: Fix step size adjustment during initial memory mapping
  x86_64, vdso: Fix the vdso address randomization algorithm

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: group scheduling corner case fix, two deadline scheduler
  fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
  system fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
  sched/deadline: Avoid double-accounting in case of missed deadlines
  sched/deadline: Fix migration of SCHED_DEADLINE tasks
  sched: Fix odd values in effective_load() calculations
  sched, fanotify: Deal with nested sleeps
  sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also some kernel side fixes: uncore PMU
  driver fix, user regs sampling fix and an instruction decoder fix that
  unbreaks PEBS precise sampling"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
  perf/x86_64: Improve user regs sampling
  perf: Move task_pt_regs sampling into arch code
  x86: Fix off-by-one in instruction decoder
  perf hists browser: Fix segfault when showing callchain
  perf callchain: Free callchains when hist entries are deleted
  perf hists: Fix children sort key behavior
  perf diff: Fix to sort by baseline field by default
  perf list: Fix --raw-dump option
  perf probe: Fix crash in dwarf_getcfi_elf
  perf probe: Fix to fall back to find probe point in symbols
  perf callchain: Append callchains only when requested
  perf ui/tui: Print backtrace symbols when segfault occurs
  perf report: Show progress bar for output resorting

Pull locking fixes from Ingo Molnar:
 "A liblockdep fix and a mutex_unlock() mutex-debugging fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Always clear owner field upon mutex_unlock()
  tools/liblockdep: Fix debug_check thinko in mutex destroy

Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent
endless growth of anon_vma hierarchy")

Anon_vma_clone() is usually called for a copy of source vma in
destination argument.  If source vma has anon_vma it should be already
in dst->anon_vma.  NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork().  In this case anon_vma_clone() finds
anon_vma for reusing.

Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that.  As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.

This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: NChris Clayton <chris2553@googlemail.com>
Reported-and-tested-by: NOded Gabbay <oded.gabbay@amd.com>
Reported-and-tested-by: NChih-Wei Huang <cwhuang@android-x86.org>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org  # to match back-porting of 7a3ef208Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit fee7e49d ("mm: propagate error from stack expansion even for
guard page") made sure that we return the error properly for stack
growth conditions.  It also theorized that counting the guard page
towards the stack limit might break something, but also said "Let's see
if anybody notices".

Somebody did notice.  Apparently android-x86 sets the stack limit very
close to the limit indeed, and including the guard page in the rlimit
check causes the android 'zygote' process problems.

So this adds the (fairly trivial) code to make the stack rlimit check be
against the actual real stack size, rather than the size of the vma that
includes the guard page.
Reported-and-tested-by: NChih-Wei Huang <cwhuang@android-x86.org>
Cc: Jay Foad <jay.foad@gmail.com>
Cc: stable@kernel.org  # to match back-porting of fee7e49dSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull VFIO fix from Alex Williamson:
 "Fix PCI header check in vfio_pci_probe() (Wei Yang)"

* tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix the check on pci device type in vfio_pci_probe()

Pull SCSI fix from James Bottomley:
 "Just one fix: a qlogic busy wait regression"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  qla2xxx: fix busy wait regression

Pull sound fixes from Takashi Iwai:
 "All a few small regression or stable fixes: a Nvidia HDMI ID addition,
  a regression fix for CAIAQ stream count, a typo fix for GPIO setup
  with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix"

* tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireworks: fix an endianness bug for transaction length
  ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda
  ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
  ALSA: snd-usb-caiaq: fix stream count check

Pull HID updates from Jiri Kosina:

 - bounds checking fixes in logitech and roccat drivers, from Peter Wu
   and Dan Carpenter

 - double-kfree fix in i2c-hid driver on bus shutdown, from Mika
   Westerberg

 - a couple of various small driver fixes

 - a few device id additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
  HID: Add a new id 0x501a for Genius MousePen i608X
  HID: logitech-hidpp: prefix the name with "Logitech"
  HID: logitech-hidpp: avoid unintended fall-through
  HID: Allow HID_BATTERY_STRENGTH to be enabled
  HID: i2c-hid: Do not free buffers in i2c_hid_stop()
  HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard
  HID: logitech-hidpp: check WTP report length
  HID: logitech-dj: check report length

Pull drm fixes from Dave Airlie:
 "I'm briefly working between holidays and LCA, so this is close to a
  couple of weeks of fixes,

  Two sets of amdkfd fixes, this is a new feature this kernel, and this
  pull fixes a few issues since it got merged, ordering when built-in to
  kernel and also the iommu vs gpu ordering patch, it also reworks the
  ioctl before the initial release.

  Otherwise:
   - radeon: some misc fixes all over, hdmi, 4k, dpm
   - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix
   - i915: power fixes, revert VGACNTR patch

  Probably be quiteer next week since I'll be at LCA anyways"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
  drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl()
  drm/amdkfd: reformat IOCTL definitions to drm-style
  drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
  drm/radeon: integer underflow in radeon_cp_dispatch_texture()
  drm/radeon: adjust default bapm settings for KV
  drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
  drm/radeon: fix sad_count check for dce3
  drm/radeon: KV has three PPLLs (v2)
  drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)
  drm/radeon: Init amdkfd only if it was compiled
  amdkfd: actually allocate longs for the pasid bitmask
  drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP
  drm/nv4c/mc: disable msi
  drm/nouveau/fb/ram/mcp77: enable NISO poller
  drm/nouveau/fb/ram/mcp77: use carveout reg to determine size
  drm/nouveau/fb/ram/mcp77: subclass nouveau_ram
  drm/nouveau: wake up the card if necessary during gem callbacks
  drm/nouveau/device: Add support for GK208B, resolves bug 86935
  drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate
  drm/nouveau/bios: fix oops on pre-nv50 chipsets
  ...

Pull arm64 fixes from Will Deacon:
 "Here is a handful of minor arm64 fixes discovered and fixed over the
  Christmas break.  The main part is adding some missing #includes that
  we seem to be getting transitively but have started causing problems
  in -next.

   - Fix early mapping fixmap corruption by EFI runtime services
   - Fix __NR_compat_syscalls off-by-one
   - Add missing sanity checks for some 32-bit registers
   - Add some missing #includes which we get transitively
   - Remove unused prepare_to_copy() macro"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/efi: add missing call to early_ioremap_reset()
  arm64: fix missing asm/io.h include in kernel/smp_spin_table.c
  arm64: fix missing asm/alternative.h include in kernel/module.c
  arm64: fix missing linux/bug.h include in asm/arch_timer.h
  arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h
  arm64: sanity checks: add missing AArch32 registers
  arm64: Remove unused prepare_to_copy()
  arm64: Correct __NR_compat_syscalls for bpf

Pull kgdb/kdb fixes from Jason Wessel:
 "These have been around since 3.17 and in kgdb-next for the last 9
  weeks and some will go back to -stable.

  Summary of changes:

  Cleanups
   - kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE

  Fixes
   - kgdb/kdb: Allow access on a single core, if a CPU round up is
     deemed impossible, which will allow inspection of the now "trashed"
     kernel
   - kdb: Add enable mask for the command groups
   - kdb: access controls to restrict sensitive commands"

* tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  kernel/debug/debug_core.c: Logging clean-up
  kgdb: timeout if secondary CPUs ignore the roundup
  kdb: Allow access to sensitive commands to be restricted by default
  kdb: Add enable mask for groups of commands
  kdb: Categorize kdb commands (similar to SysRq categorization)
  kdb: Remove KDB_REPEAT_NONE flag
  kdb: Use KDB_REPEAT_* values as flags
  kdb: Rename kdb_register_repeat() to kdb_register_flags()
  kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
  kdb: Remove currently unused kdbtab_t->cmd_flags

Pull two nfsd bugfixes from Bruce Fields.

* 'for-3.19' of git://linux-nfs.org/~bfields/linux:
  rpc: fix xdr_truncate_encode to handle buffer ending on page boundary
  nfsd: fix fi_delegees leak when fi_had_conflict returns true

Pull two Ceph fixes from Sage Weil:
 "These are both pretty trivial: a sparse warning fix and size_t printk
  thing"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: fix sparse endianness warnings
  ceph: use %zu for len in ceph_fill_inline_data()

Pull btrfs fixes from Chris Mason:
 "None of these are huge, but my commit does fix a regression from 3.18
  that could cause lost files during log replay.

  This also adds Dave Sterba to the list of Btrfs maintainers.  It
  doesn't mean we're doing things differently, but Dave has really been
  helping with the maintainer workload for years"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: don't delay inode ref updates during log replay
  Btrfs: correctly get tree level in tree_backref_for_extent
  Btrfs: call inode_dec_link_count() on mkdir error path
  Btrfs: abort transaction if we don't find the block group
  Btrfs, scrub: uninitialized variable in scrub_extent_for_parity()
  Btrfs: add more maintainers

Merge misc fixes from Andrew Morton:
 "12 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed
  memcg: fix destination cgroup leak on task charges migration
  mm: memcontrol: switch soft limit default back to infinity
  mm/debug_pagealloc: remove obsolete Kconfig options
  vfs: renumber FMODE_NONOTIFY and add to uniqueness check
  arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h
  ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file
  MAINTAINERS: update rydberg's addresses
  mm: protect set_page_dirty() from ongoing truncation
  mm: prevent endless growth of anon_vma hierarchy
  exit: fix race between wait_consider_task() and wait_task_zombie()
  ocfs2: remove bogus check in dlm_process_recovery_data

In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled
image failed to compile with the following error:

arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function)

It seems that '80d6b0c2 ARM: mm: allow text and rodata sections to be read-only'
and 'ded94779 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE'
commits crossed. 80d6b0c2 uses PMD_SECT_RDONLY macro but ded94779 renames it
and uses software bits L_PMD_SECT_RDONLY instead.

Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded94779 does in
another places.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is a static checker fix.  We write some binary settings to the
sysfs file.  One of the settings is the "->startup_profile".  There
isn't any checking to make sure it fits into the
pyra->profile_settings[] array in the profile_activated() function.

I added a check to pyra_sysfs_write_settings() in both places because
I wasn't positive that the other callers were correct.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only
cleared iff debug_locks is active. This exposes a race to other users of
the field where the mutex->owner may be still set to a stale value,
potentially upsetting mutex_spin_on_owner() among others.

References: https://bugs.freedesktop.org/show_bug.cgi?id=87955Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>