Use percpu memory rather than stack for storing the buffer lists used in
parity calculations.  Include space for dma address conversions and pass
that to async_tx via the async_submit_ctl.scribble pointer.

[ Impact: move memory pressure from stack to heap ]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In preparation for asynchronous handling of raid6 operations move the
spare page to a percpu allocation to allow multiple simultaneous
synchronous raid6 recovery operations.

Make this allocation cpu hotplug aware to maximize allocation
efficiency.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add missing call to safe_put_page from stop() by unifying open coded
raid5_conf_t de-allocation under free_conf().
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

async_xor() needs space to perform dma and page address conversions.  In
most cases the code can simply reuse the struct page * array because the
size of the native pointer matches the size of a dma/page address.  In
order to support archs where sizeof(dma_addr_t) is larger than
sizeof(struct page *), or to preserve the input parameters, we utilize a
memory region passed in by the caller.

Since the code is now prepared to handle the case where it cannot
perform address conversions on the stack, we no longer need the
!HIGHMEM64G dependency in drivers/dma/Kconfig.

[ Impact: don't clobber input buffers for address conversions ]
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Prepare the api for the arrival of a new parameter, 'scribble'.  This
will allow callers to identify scratchpad memory for dma address or page
address conversions.  As this adds yet another parameter, take this
opportunity to convert the common submission parameters (flags,
dependency, callback, and callback argument) into an object that is
passed by reference.

Also, take this opportunity to fix up the kerneldoc and add notes about
the relevant ASYNC_TX_* flags for each routine.

[ Impact: moves api pass-by-value parameters to a pass-by-reference struct ]
Signed-off-by: NAndre Noll <maan@systemlinux.org>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In support of inter-channel chaining async_tx utilizes an ack flag to
gate whether a dependent operation can be chained to another.  While the
flag is not set the chain can be considered open for appending.  Setting
the ack flag closes the chain and flags the descriptor for garbage
collection.  The ASYNC_TX_DEP_ACK flag essentially means "close the
chain after adding this dependency".  Since each operation can only have
one child the api now implicitly sets the ack flag at dependency
submission time.  This removes an unnecessary management burden from
clients of the api.

[ Impact: clean up and enforce one dependency per operation ]
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

'zero_sum' does not properly describe the operation of generating parity
and checking that it validates against an existing buffer.  Change the
name of the operation to 'val' (for 'validate').  This is in
anticipation of the p+q case where it is a requirement to identify the
target parity buffers separately from the source buffers, because the
target parity buffers will not have corresponding pq coefficients.
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add Start-of-Frame and End-of-Frame debugging to ipu_idmac.c, in the
future it might also be needed for the actual video processing in
mx3-camera, at which point, the ISRs will have to be transferred to
mx3_camera.c, for which ipu_irq_map() and ipu_irq_unmap() functions will
have to be exported.

Also simplify a couple of pointer-dereferences.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This patch adds a cyclic DMA interface to the DW DMA driver. This is
very useful if you want to use the DMA controller in combination with a
sound device which uses cyclic buffers.

Using a DMA channel for cyclic DMA will disable the possibility to use
it as a normal DMA engine until the user calls the cyclic free function
on the DMA channel. Also a cyclic DMA list can not be prepared if the
channel is already active.
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We currently update the metadata :
 1/ every 3Megabytes
 2/ When the place we will write new-layout data to is recorded in
    the metadata as still containing old-layout data.

Rule one exists to avoid having to re-do too much reshaping in the
face of a crash/restart.  So it should really be time based rather
than size based.  So change it to "every 10 seconds".

Rule two turns out to be too harsh when restriping an array
'in-place', as in that case the metadata much be updates for every
stripe.
For the in-place update, it can only possibly be safe from a crash if
some user-space program data a backup of every e.g. few hundred
stripes before allowing them to be reshaped.  In that case, the
constant metadata update is pointless.
So only update the metadata if the new metadata will report that the
end of the 'old-layout' data is beyond where we are currently
writing 'new-layout' data.
Signed-off-by: NNeilBrown <neilb@suse.de>

... and to be certain the that make_request doesn't wait forever,
add a 'wake_up' when ->reshape_progress has been set to MaxSector
Signed-off-by: NNeilBrown <neilb@suse.de>

This was only needed when the code was experimental.  Most of it
is well tested now, so the option is no longer useful.
Signed-off-by: NNeilBrown <neilb@suse.de>

When we are reshaping an array, it is very important that we read
the data from a particular sector offset before writing new data
at that offset.

In most cases when growing or shrinking an array we read long before
we even consider writing.  But when restriping an array without
changing it size, there is a small possibility that we might have
some data to available write before the read has happened at the same
location.  This would require some stripes to be in cache already.

To guard against this small possibility, we check, before writing,
that the 'old' stripe at the same location is not in the process of
being read.  And we ensure that we mark all 'source' stripes as such
before allowing new 'destination' stripes to proceed.
Signed-off-by: NNeilBrown <neilb@suse.de>

When no resync if happening, both of these files currently have
meaningless values (is slightly different ways).
Change them to "none" in that case.
Signed-off-by: NNeilBrown <neilb@suse.de>

If an array has 3 or more devices, we allow the chunksize or layout
to be changed and when a reshape starts, we use these as the 'new'
values.
Signed-off-by: NNeilBrown <neilb@suse.de>

This ensures that even when old and new stripes are overlapping,
we will try to read all of the old before having to write any
of the new.
Signed-off-by: NNeilBrown <neilb@suse.de>

Add prev_algo to raid5_conf_t along the same lines as prev_chunk
and previous_raid_disks.
Signed-off-by: NNeilBrown <neilb@suse.de>

Add "prev_chunk" to raid5_conf_t, similar to "previous_raid_disks", to
remember what the chunk size was before the reshape that is currently
underway.

This seems like duplication with "chunk_size" and "new_chunk" in
mddev_t, and to some extent it is, but there are differences.
The values in mddev_t are always defined and often the same.
The prev* values are only defined if a reshape is underway.

Also (and more significantly) the raid5_conf_t values will be changed
at the same time (inside an appropriate lock) that the reshape is
started by setting reshape_position.  In contrast, the new_chunk value
is set when the sysfs file is written which could be well before the
reshape starts.
Signed-off-by: NNeilBrown <neilb@suse.de>

During a raid5 reshape, we have some stripes in the cache that are
'before' the reshape (and are still to be processed) and some that are
'after'.  They are currently differentiated by having different
->disks values as the only reshape current supported involves changing
the number of disks.

However we will soon support reshapes that do not change the number
of disks (chunk parity or chunk size).  So make the difference more
explicit with a 'generation' number.
Signed-off-by: NNeilBrown <neilb@suse.de>

Update md.txt to reflect recent changes in a number of sysfs
attributes.
Signed-off-by: NNeilBrown <neilb@suse.de>

When reshaping a raid5 to have fewer devices, we work from the end of
the array to the beginning.
md_do_sync gives addresses to sync_request that go from the beginning
to the end.  So largely ignore them use the internal state variable
"reshape_progress" to keep track of what to do next.

Never allow the size to be reduced below the minimum (4 for raid6,
3 otherwise).

We require that the size of the array has already been reduced before
the array is reshaped to a smaller size.  This is because simply
reducing the size is an easily reversible operation, while the reshape
is immediately destructive and so is not reversible for the blocks at
the ends of the devices.
Thus to reshape an array to have fewer devices, you must first write
an appropriately small size to md/array_size.

When reshape finished, we remove any drives that are no longer
needed and fix up ->degraded.
Signed-off-by: NNeilBrown <neilb@suse.de>

When reducing the number of devices in a raid4/5/6, the reshape
process has to start at the end of the array and work down to the
beginning.  So we need to handle expand_progress and expand_lo
differently.

This patch renames "expand_progress" and "expand_lo" to avoid the
implication that anything is getting bigger (expand->reshape) and
every place they are used, we make sure that they are used the right
way depending on whether delta_disks is positive or negative.
Signed-off-by: NNeilBrown <neilb@suse.de>

Currently raid5 (the only module that supports restriping)
notices that the reshape has finished be sync_request being
given a large value, and handles any cleanup them.

This patch changes it so md_check_recovery calls into an
explicit finish_reshape method as well.

The clean-up from sync_request can do things that need to be
done promptly, typically things local to the raid5_conf_t
structure.

The "finish_reshape" method is called under the mddev_lock
so it can do things involving reconfiguring the device.

This allows us to get rid of md_set_array_sectors_locked, which
would have caused a deadlock if you tried to stop and array
while a reshape was happening.
Signed-off-by: NNeilBrown <neilb@suse.de>

This is the first of four patches which combine to allow md/raid5 to
reduce the number of devices in the array by restriping the data over
a subset of the devices.

If the number of disks in a raid4/5/6 is being reduced, then the
default size must be based on the new number, not the old number
of devices.
In general, it should be based on the smaller of new and old.
Signed-off-by: NNeilBrown <neilb@suse.de>

We now have this value in stripe_head so we don't need to duplicate
it.
Signed-off-by: NNeilBrown <neilb@suse.de>

Move the raid6 data processing routines into a standalone module
(raid6_pq) to prepare them to be called from async_tx wrappers and other
non-md drivers/modules.  This precludes a circular dependency of raid456
needing the async modules for data processing while those modules in
turn depend on raid456 for the base level synchronous raid6 routines.

To support this move:
1/ The exportable definitions in raid6.h move to include/linux/raid/pq.h
2/ The raid6_call, recovery calls, and table symbols are exported
3/ Extra #ifdef __KERNEL__ statements to enable the userspace raid6test to
   compile
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

raid4 allows only one failed disk.
Signed-off-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

Allow userspace to set the size of the array according to the following
semantics:

1/ size must be <= to the size returned by mddev->pers->size(mddev, 0, 0)
   a) If size is set before the array is running, do_md_run will fail
      if size is greater than the default size
   b) A reshape attempt that reduces the default size to less than the set
      array size should be blocked
2/ once userspace sets the size the kernel will not change it
3/ writing 'default' to this attribute returns control of the size to the
   kernel and reverts to the size reported by the personality

Also, convert locations that need to know the default size from directly
reading ->array_sectors to <pers>_size.  Resync/reshape operations
always follow the default size.

Finally, fixup other locations that read a number of 1k-blocks from
userspace to use strict_blocks_to_sectors() which checks for unsigned
long long to sector_t overflow and blocks to sectors overflow.
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Get personalities out of the business of directly modifying
->array_sectors.  Lays groundwork to introduce policy on when
->array_sectors can be modified.
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In preparation for giving userspace control over ->array_sectors we need
to be able to retrieve the 'default' size, and the 'anticipated' size
when a reshape is requested.  For personalities that do not reshape emit
a warning if anything but the default size is requested.

In the raid5 case we need to update ->previous_raid_disks to make the
new 'default' size available.
Reviewed-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Hello,

 I found a typo Bosto"m" in FSF address.
And I am checking around linux source code.
Here is the only place which uses Bosto"m" (not Boston).
Signed-off-by: NAtsushi SAKAI <sakaia@jp.fujitsu.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

If a raid6 is still in the layout that comes from converting raid5
into a raid6. this will allow us to convert it back again.
Signed-off-by: NNeilBrown <neilb@suse.de>

Signed-off-by: NNeilBrown <neilb@suse.de>

2-drive raid5's aren't very interesting.  But if you are converting
a raid1 into a raid5, you will at least temporarily have one.  And
that it a good time to set the layout/chunksize for the new RAID5
if you aren't happy with the defaults.

layout and chunksize don't actually affect the placement of data
on a 2-drive raid5, so we just do some internal book-keeping.
Signed-off-by: NNeilBrown <neilb@suse.de>

The RAID1 must have two drives and be a suitable size to
be a multiple of a chunksize that isn't too small.
Signed-off-by: NNeilBrown <neilb@suse.de>

Implement this for RAID6 to be able to 'takeover' a RAID5 array.  The
new RAID6 will use a layout which places Q on the last device, and
that device will be missing.
If there are any available spares, one will immediately have Q
recovered onto it.
Signed-off-by: NNeilBrown <neilb@suse.de>

To be able to change the 'level' of an md/raid array, we need to
suspend the device so that no requests are active - then move some
pointers around etc.

The code already keeps counts of active requests and the ->quiesce
function can be used to wait until those counts hit zero.
However the quiesce function blocks new requests once they are all
ready 'inside' the personality module, and that is too late if we want
to replace the personality modules.

So make all md requests come in through a common md_make_request
function that keeps track of how many requests have entered the
modules but may not yet be on the internal reference counts.
Allow md_make_request to be blocked when we want to suspend the
device, and make it possible to wait for all those in-transit requests
to be added to internal lists so that ->quiesce can wait for them.

There is still a problem that when a request completes, we drop the
ref count inside the personality code so there is a short time between
when the refcount hits zero, and when the personality code is no
longer being used.
The personality code never blocks (schedule or spinlock) between
dropping the refcount and exiting the routine, so this should be safe
(as put_module calls synchronize_sched() before unmapping the module
code).
Signed-off-by: NNeilBrown <neilb@suse.de>

Mostly md_unregister_thread is only called when we know that the
thread is NULL, but sometimes we need to check first.  It is safer
to put the check inside md_unregister_thread itself.
Signed-off-by: NNeilBrown <neilb@suse.de>

.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.
Signed-off-by: NNeilBrown <neilb@suse.de>