Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to
include/linux/pci_id.h

Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard

[akpm@linux-foundation.org: build fix]
Signed-off-by: NLuís P Mendes <luis.p.mendes@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add ADDI-DATA GmbH communication cards to 8250_pci driver.  Supported cards
are:

APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2,
APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKrauth J. <krauth.julien@addi-data.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds a mac80211 based wireless driver for the rtl8180 and
rtl8185 PCI wireless cards.  Also included are some rtl8187 changes
required due to the relationship between that driver and this one.

Michael Wu is primarily responsible for the initial driver and rtl8185
support.  Andreas Merello provided the additional rtl8180 support.

Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very
helpful for the rtl8225z2 code.

The Signed-off-by information below is collected from the individual
patches submitted to wireless-2.6 before merging this driver upstream.
Signed-off-by: NAndrea Merello <andreamrl@tiscali.it>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NMichael Wu <flamingice@sourmilk.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

- whitespaces vs tabs
- use 80 cols
- use if_mii
- use netdev_priv
- remove useless cast to void *
- PCI device id does not need to be globally available
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

- checkpatch fixes

- fix bogus and uninitialized return codes in r6040_start_xmit()

- netdev_get_settings() fix obvious locking bug flagged by compiler warning

- set DMA consistent mask

- remove unnecessary setting of dev->base_addr
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NEliezer Tamir <eliezert@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not much to do here. It's an ata memory as disk.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

It is important that these resources be reserved
to avoid conflicts with well known ACPI registers.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The JMicron JMB38x chip doesn't support transfers that aren't 32-bit
aligned (both size and start address). It also doesn't like switching
between PIO and DMA mode, so it needs to be reset after each request.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch adds new device ids and features for mcp79 devices into the
forcedeth driver.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add support for version 2 of the ioatdma device.  This device handles
the descriptor chain and DCA services slightly differently:
 - Instead of moving the dma descriptors between a busy and an idle chain,
   this new version uses a single circular chain so that we don't have
   rewrite the next_descriptor pointers as we add new requests, and the
   device doesn't need to re-read the last descriptor.
 - The new device has the DCA tags defined internally instead of needing
   them defined statically.
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Cc: "Williams, Dan J" <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New driver to read FB-DIMM temperature sensors on systems with the
Intel 5000 series chipsets.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>

Now that we have dealt with the real issue, in that some ATI SATA and
USB controllers needed the INTX_DISABLE quirk, we can remove these AMD
chipset global MSI disabling quirks.

This reverts three changesets:

4be8f906 (PCI: disable MSI on RS690)
aea6a433 (PCI: disable MSI on RD580)
f122392f (PCI: disable MSI on RX790)

This is based upon testing and feedback from
Shane Huang <Shane.Huang@amd.com>.

Cc: Shane Huang <Shane.Huang@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the fix for the following problem:

https://bugzilla.redhat.com/show_bug.cgi?id=227657

The bnx2 device 5706 complains about MSI not working behind a
ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem:

e3008ded:

"PCI: disable MSI by default on systems with Serverworks HT1000 chips"

was not entirely correct, and has been reverted.

MSI does not work on the PCIX bus because the BIOS did not set the
HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the
bridge.  We use the existing quirk_msi_ht_cap() to detect the problem
and disable MSI in all buses behind it.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Cc: Anantha Subramanyam <ananth@broadcom.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit e3008ded.

The real bug was an INTX issue in the tg3 ethernet chip, and
cured by commit c129d962a66c76964954a98b38586ada82cf9381
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch adds support for upcoming 5723 devices.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add device ids for new revs of the Intel I/OAT DMA engine
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for a whole range of boards. Some are partly autodetected but
not fully correctly others (PCI Express notably) not at all. Stick all
the right entries in.

Thanks to Mainpine for information and testing.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch provides driver for ITE 8152 PCI bridge.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel
yenta driver for CardBus.  With this patch cardbus works on e.g.  Dell
Latitude XPi P150CD.

Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch

Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)

Testing and confirmation that it works by Austin Acton

Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel.

Added some more cleanups according to CodingStyle, as noted by
Randy Dunlap on LKML.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: NThomas Backlund <tmb@mandriva.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

force_enable hpet for ICH5.

[ Build fixes from Andrew Morton ]
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Description:
** support ARC1200/1201/1202 SATA RAID adapter, which is named
ACB_ADAPTER_TYPE_B
** modify the arcmsr_pci_slot_reset function
** modify the arcmsr_pci_ers_disconnect_forepart function
** modify the arcmsr_pci_ers_need_reset_forepart function 
Signed-off-by: NNick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

A new PCI_VENDOR_ID for pci_ids.h.
signed-off-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch adds rest of the miscellaneous code required to support the
5761.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the support for 5784 and 5764 devices.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[ Ported to napi_struct changes... -DaveM ]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJesse Huang <jesse@icplus.com.tw>
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move include/linux/umem.h to drivers/block, as umem.c is the only user,
and its not an exported header.

Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Thanks to Matt Domsch and Rezwanul Kabir at Dell, we know how to disable the
MMC controller on the multi-function Ricoh R5C832. The MMC controller needs
to be disabled or it will steal MMC cards from the SD controller where they
would otherwise be supported by the Linux SDHCI driver.
Signed-off-by: NPhilipl Langdale <philipl@overt.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Added basic board port for MPC8572 DS reference platform that is
similiar to the MPC8544/33 DS reference platform in uniprocessor mode.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds the Intel Tolapai LPC and SMBus Controller DID's.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJoseph Chan <josephchan@via.com.tw>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We find that SB700 and SB800 use the same SMBus device ID as SB600, which is
0x4385, instead of the already submitted 0x4395.

Besides removing the wrong SB700 device ID, add SB800 support to kernel, by
renaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into
PCI_DEVICE_ID_ATI_SBX00_SMBUS.
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDave Airlie <airlied@linux.ie>

RX790 can't do MSI like its predecessors.  Disable MSI on RX790.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

RD580 can't do MSI like its predecessors.  Disable MSI on RD580.
Signed-off-by: NTejun Heo <teheo@suse.de>
CC: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

RS690 can't do MSI like its predecessors.  Disable MSI on RS690.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Henry Su <henry.su@amd.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>