Replace the dentry vote mechanism with a cluster lock which covers a set
of dentries. This allows us to force d_delete() only on nodes which actually
care about an unlink.

Every node that does a ->lookup() gets a read only lock on the dentry, until
an unlink during which the unlinking node, will request an exclusive lock,
forcing the other nodes who care about that dentry to d_delete() it. The
effect is that we retain a very lightweight ->d_revalidate(), and at the
same time get to make large improvements to the average case performance of
the ocfs2 unlink and rename operations.

This patch adds the cluster lock type which OCFS2 can attach to
dentries.  A small number of fs/ocfs2/dcache.c functions are stubbed
out so that this change can compile.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

File system lock names are very regular right now, so we really only need to
pass an extra parameter to dlmlock().
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We just need to add a namelen field to the user_lock_res structure, and
update a few debug prints. Instead of updating all debug prints, I took the
opportunity to remove a few that are likely unnecessary these days.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The OCFS2 DLM uses strlen() to determine lock name length, which excludes
the possibility of putting binary values in the name string. Fix this by
requiring that string length be passed in as a parameter.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

An AST can be delivered via the network after a lock has been removed, so no
need to print an error when we see that.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (50 commits)
  [libata] Delete pata_it8172 driver
  [PATCH] libata: improve handling of diagostic fail (and hardware that misreports it)
  [PATCH] libata: fix non-uniform ports handling
  Fix libata resource conflict for legacy mode
  [libata] ata_piix: build fix
  [PATCH] pata_amd: Check enable bits on Nvidia
  [PATCH] Update SiS PATA
  [libata] Add pata_jmicron driver to Kconfig, Makefile
  [libata #pata-drivers] Trim trailing whitespace.
  [libata] Trim trailing whitespace.
  [libata] Add a bunch of PATA drivers.
  Rename libata-bmdma.c to libata-sff.c.
  libata: Grand renaming.
  Clean up drivers/ata/Kconfig a bit.
  [PATCH] CONFIG_PM=n slim: drivers/scsi/sata_sil*
  [PATCH] sata_via: Add SATA support for vt8237a
  [PATCH] libata: change path to libata in libata.tmpl
  [PATCH] libata: s/CONFIG_SCSI_SATA/CONFIG_[S]ATA/g in pci/quirks.c
  libata: Make sure drivers/ata is a separate Kconfig menu
  [libata] ata_piix: add missing kfree()
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)
  net/ieee80211: fix more crypto-related build breakage
  [PATCH] Spidernet: add ethtool -S (show statistics)
  [NET] GT96100: Delete bitrotting ethernet driver
  [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM
  [PATCH] Cirrus Logic ep93xx ethernet driver
  r8169: the MMIO region of the 8167 stands behin BAR#1
  e1000, ixgb: Remove pointless wrappers
  [PATCH] Remove powerpc specific parts of 3c509 driver
  [PATCH] s2io: Switch to pci_get_device
  [PATCH] gt96100: move to pci_get_device API
  [PATCH] ehea: bugfix for register access functions
  [PATCH] e1000 disable device on PCI error
  drivers/net/phy/fixed: #if 0 some incomplete code
  drivers/net: const-ify ethtool_ops declarations
  [PATCH] ethtool: allow const ethtool_ops
  [PATCH] sky2: big endian
  [PATCH] sky2: fiber support
  [PATCH] sky2: tx pause bug fix
  drivers/net: Trim trailing whitespace
  [PATCH] ehea: IBM eHEA Ethernet Device Driver
  ...

Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and
drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by
commit 84fa7933 that just happened to be
next to unrelated changes in this update.

Signed-off-by: NJeff Garzik <jeff@garzik.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] scsi_transport_fc: fixup netlink arguments

nlmsg_multicast now takes an extra allocation flag, so add it to
the use in the fibre channel transport class.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (94 commits)
  [SCSI] SPI transport class: misc DV fixes
  [SCSI] Switch some more scsi drivers to pci_get_device and refcounted pci structures
  [SCSI] eata_pio cleanup and PCI fix
  [SCSI] aacraid: README update
  [SCSI] aacraid: remove scsi_remove_device
  [SCSI] aacraid: merge rx and rkt code
  [SCSI] aacraid: expose physical devices
  [SCSI] aacraid: misc cleanup
  [SCSI] zfcp: update maintainers file
  [SCSI] zfcp: update maintainers file
  [SCSI] zfcp: fix: avoid removal of fsf reqs before qdio queues are down
  [SCSI] zfcp: introduce struct timer_list in struct zfcp_fsf_req
  [SCSI] zfcp: fix: use correct req_id in eh_abort_handler
  [SCSI] zfcp: create private slab caches to guarantee proper data alignment
  [SCSI] zfcp: remove zfcp_ccw_unregister function
  [SCSI] aic7xxx: pause sequencer before touching SBLKCTL
  [SCSI] aic7xxx: avoid checking SBLKCTL register for certain cards
  [SCSI] scsi_debug version 1.80
  [SCSI] megaraid: Make megaraid_ioctl() check copy_to_user() return value
  [SCSI] aha152x: remove static host array
  ...

Conflicts:

	include/linux/blkdev.h

Trivial merge to incorporate tag prototypes.

Key more of the domain validation settings off the inquiry data from
the disk (in particular, don't try IU or DT unless the disk claims to
support them.

Also add a new dv_in_progress flag to prevent recursive DV.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately, sparc64 doesn't have an easy way to do a "64 X 64 -->
128" bit multiply like PowerPC and IA64 do.  We were doing a
"64 X 64 --> 64" bit multiple which causes overflow very quickly with
a 30-bit quotient shift.

So use a quotientshift count of 10 instead of 30, just like x86 and
ARM do.

This also fixes the wrapping of printk timestamp values every ~17
seconds.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This started as a PCI reference fixup but to do that I need to build it,
to build it I need to fix it and its full of 32bitisms and uglies.

It has been resurrected, I'm not sure if this is a thank you for the
work on the license stuff or punishment for some unknown misdeed however
8). I've also fixed a memory scribble in the init code.

One oddity - the changes from HZ * to constants are deliberate. Whoever
originally wrote the code (or cleaned it up) used HZ for a cycle timing
loop even though is not HZ related. I've put it back to the counts used
in the old days when the driver was most used.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

This patch to the driver's documentation adds a few new product entries,
sorts the entries on OEM lines first for easy searching, followed by
product id order to make it easier to compare against the open source
pci list. The driver has 'family match' so is somewhat future proof, no
code changes are required to recognize the new products.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

Until the system is stabilized, I am suggesting the enclosed
modification to prevent the driver from tickling the panic. Once sysfs
and friends are stabilized, the patch may be backed out. We have yet to
evaluate if we really want to relinquish existing Scsi Devices in any
case, holding on to them as configuration of arrays comes and goes makes
some sense as well. As a result, we have opted to pull the lines rather
than comment them in legacy.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

The only real difference between the rkt and rx platform modules is the
offset of the message registers. This patch recognizes this similarity
and simplifies the driver to reduce it's code footprint and to improve
maintainability by reducing the code duplication.

Visibly, the 'rkt.c' portion of this patch looks more complicated than
it really is. View it as retaining the rkt-only specifics of the
interface.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

I am placing this functionality into an insmod parameter. Normally the physical
components are exported to sg, and are blocked from showing up in sd.

Note that the pass-through I/O path via the driver through the Firmware to the
physical disks is not an optimized path, the card is designed for Hardware
RAID, elevator sorting and caching. This should not be used as a means for
utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller,
performance should suck by a few percentage points, any RAID meta-data on the
drives will confuse the controller about who owns the drives and there is a
high risk of destroying content in both directions. Unreliable and for
experimentation or strange controlled circumstances only.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

Basically cleanup, nothing here will have an affect. Adjusting some
error codes, removing superfluous definitions and code fragments.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* git://git.infradead.org/mtd-2.6:
  [MTD] Whitespace cleanup in SSFDC driver.
  [MTD] SSFDC translation layer minor cleanup
  [MTD] Fix dependencies with CONFIG_MTD=m

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (148 commits)
  [ALSA] intel8x0m - Free irq in suspend
  [ALSA] Move CONFIG_SND_AC97_POWER_SAVE to pci/Kconfig
  [ALSA] usb-audio: add mixer control names for the Aureon 5.1 MkII
  [ALSA] ES1938: remove duplicate field initialization
  [ALSA] usb-audio: increase number of packets per URB
  [ALSA] hda-codec - Fix headphone auto-toggle on sigmatel codec
  [ALSA] hda-intel - A slight cleanup of timeout check in azx_get_response()
  [ALSA] hda-codec - Fix mic input with STAC92xx codecs
  [ALSA] mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values
  [ALSA] gus: Use SEEK_{SET,CUR,END} instead of hardcoded values
  [ALSA] opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values
  [ALSA] sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values
  [ALSA] hda-codec - Support multiple headphone pins
  [ALSA] hda_intel prefer 24bit instead of 20bit
  [ALSA] hda-codec - Add vendor ids for Motorola and Conexant
  [ALSA] hda-codec - Add device id for Motorola si3054-compatible codec
  [ALSA] Add missing compat ioctls for ALSA control API
  [ALSA] powermac - Fix Oops when conflicting with aoa driver
  [ALSA] aoa: add locking to tas codec
  [ALSA] hda-intel - Fix suspend/resume with MSI
  ...

* git://git.linux-nfs.org/pub/linux/nfs-2.6: (74 commits)
  NFS: unmark NFS direct I/O as experimental
  NFS: add comments clarifying the use of nfs_post_op_update()
  NFSv4: rpc_mkpipe creating socket inodes w/out sk buffers
  NFS: Use SEEK_END instead of hardcoded value
  NFSv4: When mounting with a port=0 argument, substitute port=2049
  NFSv4: Poll more aggressively when handling NFS4ERR_DELAY
  NFSv4: Handle the condition NFS4ERR_FILE_OPEN
  NFSv4: Retry lease recovery if it failed during a synchronous operation.
  NFS: Don't invalidate the symlink we just stuffed into the cache
  NFS: Make read() return an ESTALE if the file has been deleted
  NFSv4: It's perfectly legal for clp to be NULL here....
  NFS: nfs_lookup - don't hash dentry when optimising away the lookup
  SUNRPC: Fix Oops in pmap_getport_done
  SUNRPC: Add refcounting to the struct rpc_xprt
  SUNRPC: Clean up soft task error handling
  SUNRPC: Handle ENETUNREACH, EHOSTUNREACH and EHOSTDOWN socket errors
  SUNRPC: rpc_delay() should not clobber the rpc_task->tk_status
  Fix a referral error Oops
  NFS: NFS_ROOT should use the new rpc_create API
  NFS: Fix up compiler warnings on 64-bit platforms in client.c
  ...

Manually resolved conflict in net/sunrpc/xprtsock.c

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (353 commits)
  [IPV6] ADDRCONF: Mobile IPv6 Home Address support.
  [IPV6] ADDRCONF: Allow non-DAD'able addresses.
  [IPV6] NDISC: Fix is_router flag setting.
  [IPV6] ADDRCONF: Convert addrconf_lock to RCU.
  [IPV6] NDISC: Add proxy_ndp sysctl.
  [IPV6] NDISC: Set per-entry is_router flag in Proxy NA.
  [IPV6] NDISC: Avoid updating neighbor cache for proxied address in receiving NA.
  [IPV6]: Don't forward packets to proxied link-local address.
  [IPV6] NDISC: Handle NDP messages to proxied addresses.
  [NETFILTER]: PPTP conntrack: fix another GRE keymap leak
  [NETFILTER]: PPTP conntrack: fix GRE keymap leak
  [NETFILTER]: PPTP conntrack: fix PPTP_IN_CALL message types
  [NETFILTER]: PPTP conntrack: check call ID before changing state
  [NETFILTER]: PPTP conntrack: clean up debugging cruft
  [NETFILTER]: PPTP conntrack: consolidate header parsing
  [NETFILTER]: PPTP conntrack: consolidate header size checks
  [NETFILTER]: PPTP conntrack: simplify expectation handling
  [NETFILTER]: PPTP conntrack: remove unnecessary cid/pcid header pointers
  [NETFILTER]: PPTP conntrack: fix header definitions
  [NETFILTER]: PPTP conntrack: remove more dead code
  ...

The error return values are truncated by unlikely so we need to
save it first.  Thanks to Kyle Moffett for spotting this.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As Andreas stated he will not maintain the zfcp driver anymore.
Instead I will take over the responsibility.
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Removed myself as maintainer of the s390 zfcp driver --
I will not maintain it any longer.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix the fix ... One of my previous fixes introduced removal of all fsf
requests in zfcp's eh_host_reset_handler. But this must not happen
before qdio queues are shut down. So, I revert the changes of
zfcp_scsi_eh_host_reset_handler.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This instance will be used whenever a timer is needed for
a request by zfcp.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

zfcp's eh_abort_handler used the wrong request ID to
identify the request to be aborted. The bug was introduced
with commit fea9d6c7
for improved management of request IDs. The bug is
fixed with this patch.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Create private slab caches in order to guarantee proper alignment of
data structures that get passed to hardware.

Sidenote: with this patch slab cache debugging will finally work on s390
(at least no known problems left).

Furthermore this patch does some minor cleanups:
- store ptr for transport template in struct zfcp_data
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Compile fix ups and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove unused zfcp_ccw_unregister function (leftover from zfcp's
module_exit era).
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Some cards need to pause the sequencer before the SBLKCTL register is
touched.  This fixes a PCI related oops seen on powerpc macs with this
card caused by trying to ascertain the bus signalling before beginning
domain validation.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

For cards that don't support LVD, checking the SBLKCTL register to
determine the bus singalling doesn't work.  So, check that the card
supports LVD first (AHC_ULTRA2) before checking the register.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

See http://www.torque.net/sg/sdebug26.html for more
information on the scsi_debug driver.

ChangeLog:
  - add 'vpd_use_hostno' parameter to allow simulated hosts
    to see the same set of targets (and luns). For testing
    multipath software.
  - add 'fake_rw' parameter to ignore the data in READ and
    WRITE commands
  - add support for log subpages (new in SPC-4)
  - yield appropriate block descriptor for MODE SENSE
    commands (only for pdt=0 (i.e. disks))
  - REQUEST SENSE response no longer shows the stopped
    power condition (SAT changed to agree with SPC-3)
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>