- 27 8月, 2013 3 次提交
-
-
由 Michael Ellerman 提交于
This makes back traces and profiles easier to read. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The symbols that name some of our exception trampolines are ahead of the location they name. In most cases this is OK because the code is tightly packed, but in some cases it means the symbol floats ahead of the correct location, eg: c000000000000ea0 <performance_monitor_pSeries_1>: ... c000000000000f00: 7d b2 43 a6 mtsprg 2,r13 Fix them all by moving the symbol after the set of the location. While we're moving them anyway, rename them to loose the camelcase and to make it clear that they are trampolines. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
The VSX alignment handler needs to write out the existing VSX state to memory before operating on it (flush_vsx_to_thread()). If we take a VSX alignment exception in the kernel bad things will happen. It looks like we could write the kernel state out to the user process, or we could handle the kernel exception using data from the user process (depending if MSR_VSX is set or not). Worse still, if the code to read or write the VSX state causes an alignment exception, we will recurse forever. I ended up with hundreds of megabytes of kernel stack to look through as a result. Floating point and SPE code have similar issues but already include a user check. Add the same check to emulate_vsx(). With this patch any unaligned VSX loads and stores in the kernel will show up as a clear oops rather than silent corruption of kernel or userspace VSX state, or worse, corruption of a potentially unlimited amount of kernel memory. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 8月, 2013 1 次提交
-
-
由 Wang Dongsheng 提交于
Update the 64-bit hibernation code to support Book E CPUs. Some registers and instructions are not defined for Book3e (SDR reg, tlbia instruction). SDR: Storage Description Register. Book3S and Book3E have different address translation mode, we do not need HTABORG & HTABSIZE to translate virtual address to real address. More registers are saved in BookE-64bit.(TCR, SPRG1) Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 21 8月, 2013 1 次提交
-
-
由 Scott Wood 提交于
Some CPUs (such as e500v1/v2) don't implement mftb and will take a trap. mfspr should work on everything that has a timebase, and is the preferred instruction according to ISA v2.06. Currently we get away with mftb on 85xx because the assembler converts it to mfspr due to -Wa,-me500. However, that flag has other effects that are undesireable for certain targets (e.g. lwsync is converted to sync), and is hostile to multiplatform kernels. Thus we would like to stop setting it for all e500-family builds. mftb/mftbu instances which are in 85xx code or common code are converted. Instances which will never run on 85xx are left alone. Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 16 8月, 2013 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
When reworking udbg_16550.c I forgot to remove the old and now useless code for the CONFIG_PPC_EARLY_DEBUG_WSP case, which doesn't build as a result. I also missed a cast. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 14 8月, 2013 34 次提交
-
-
由 Anton Blanchard 提交于
Add little endian support for demuxing SMP IPIs Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Alistair noticed we got a SIGILL on userspace mfpvr instructions. Remove the little endian check in the emulation code, it is probably there to protect against the old pseudo little endian implementations but doesn't make sense for real little endian. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
The lppaca, slb_shadow and dtl_entry hypervisor structures are big endian, so we have to byte swap them in little endian builds. LE KVM hosts will also need to be fixed but for now add an #error to remind us. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alistair Popple 提交于
Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We pass dma_window to of_parse_dma_window as a void * and then run through hoops to cast it back to a u32 array. In the process we lose endian annotation. Simplify it by just passing a __be32 * down. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Fix a couple of sparse warnings. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alistair Popple 提交于
Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
RTAS expects arguments in the call buffer to be big endian so we need to byteswap on little endian builds Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alistair Popple 提交于
Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ian Munsie 提交于
On PowerPC the device tree is always big endian, but the CPU could be either, so add be32_to_cpu where appropriate and change the types of device tree data to __be32 etc to allow sparse to locate endian issues. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vasant Hegde 提交于
So far "/sys/devices/system/cpu/cpuX/topology/physical_package_id" was always default (-1) on ppc64 architecture. Now, some systems have an ibm,chip-id property in the cpu nodes in the device tree. On these systems, we now use this information to display physical_package_id. Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
Some systems have an ibm,chip-id property in the cpu nodes in the device tree. On these systems, we now use that to compute the cpu_core_mask (i.e. the set of core siblings) rather than looking at cache properties. Signed-off-by: NPaul Mackerras <paulus@samba.org> Tested-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
This factors out the details of updating cpu_core_mask into a separate function, to make it easier to change how the mask is calculated later. This makes no functional change. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
The denormalized exception handler (denorm_exception_hv) has a couple of bugs. If the CONFIG_PPC_DENORMALISATION option is not selected, or the HSRR1_DENORM bit is not set in HSRR1, we don't test whether the interrupt occurred within a KVM guest. On the other hand, if the HSRR1_DENORM bit is set and CONFIG_PPC_DENORMALISATION is enabled, we corrupt the CFAR and PPR. To correct these problems, this replaces the open-coded version of EXCEPTION_PROLOG_1 that is there currently, and that is missing the saving of PPR and CFAR values to the PACA, with an instance of EXCEPTION_PROLOG_1. This adds an explicit KVMTEST after testing whether the exception is one we can handle, and adds code to restore the CFAR on exit. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
Instead of implementing an empty giveup_fpu() function for each 32bit processor type, replace them with an unique empty inline function. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
In the current kernel, the function flush_fp_to_thread() is not dependent on CONFIG_PPC_FPU. So most invocations of this function is not wrapped by CONFIG_PPC_FPU. Even through we don't really save the FPRs to the thread struct if CONFIG_PPC_FPU is not enabled, but there does have some runtime overhead such as the check for tsk->thread.regs and preempt disable and enable. It really make no sense to do that. So make it a nop when CONFIG_PPC_FPU is disabled. Also remove the wrapped #ifdef CONFIG_PPC_FPU when invoking this function. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
In commit c6e6771b(powerpc: Introduce VSX thread_struct and CONFIG_VSX) we add a invocation of flush_fp_to_thread() before copying the FPR or VSR to users. But we already invoke the flush_fp_to_thread() in this function. So remove one of them. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
The only using of function disable_kernel_fp() was already dropped in the commit 5daf9071 (powerpc: merge align.c). Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
There are two invocations of do_mathemu() in traps.c. And the codes in these two places are almost the same. Introduce a locale function to eliminate the duplication. With this change we can also make sure that in program_check_exception() the PPC_WARN_EMULATED is invoked for the correctly emulated math instructions. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kevin Hao 提交于
By doing this we can make sure that the FPU state is only flushed to the thread struct when it is really needed. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Bolle 提交于
The Kconfig symbol 8XX_MINIMAL_FPEMU was removed in commit 968219fa ("powerpc/8xx: Remove 8xx specific "minimal FPU emulation""). But that commit didn't remove all code depending on that symbol. Do so now. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The udbg_16550 code, which we use for our early consoles and debug backends was fairly messy. Especially for the debug consoles, it would re-implement the "high level" getc/putc/poll functions for each access method. It also had code to configure the UART but only for the straight MMIO method. This changes it to instead abstract at the register accessor level, and have the various functions and configuration routines use these. The result is simpler and slightly smaller code, and free support for non-MMIO mapped PIO UARTs, which such as the ones that can be present on a POWER 8 LPC bus. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to implement a set of hooks for IO port access to use the LPC bus via OPAL calls for the first 64K of IO space Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This includes walking the parent nodes if necessary. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Remove the generic PPC_INDIRECT_IO and ensure we only add overhead to the right accessors. IE. If only CONFIG_PPC_INDIRECT_PIO is set, we don't add overhead to all MMIO accessors. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-