- 17 3月, 2012 1 次提交
-
-
由 Martyn Welch 提交于
This patch adds the GE_FPGA configuration option. This is being carried out as ground work to allow the PIC and GPIO drivers to be move from the powerpc 86xx platform directory to more general locations to allow them to be used on non-86xx boards and to reduce churn when further boards using these drivers are added. Signed-off-by: NMartyn Welch <martyn.welch@ge.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 03 3月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: NFelipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: NWim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 29 2月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling "overidden" to "overridden" in drivers/watchdog/Kconfig Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 21 2月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling "overidden" to "overridden" in drivers/watchdog/Kconfig Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 1月, 2012 1 次提交
-
-
由 Marc Vertes 提交于
New driver for the hardware watchdog timer on VIA chipsets. This driver uses the new watchdog framework. PnP must be enabled in BIOS to get full control of watchdog registers. The timer code has been added by Wim Van Sebroeck. Tested on a Artigo A1100, VX855 chipset. Signed-off-by: NMarc Vertes <marc.vertes@sigfox.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 15 11月, 2011 1 次提交
-
-
由 Wim Van Sebroeck 提交于
Remove the driver (that was added in v2.6.32) since the architecture has never been merged into mainline. Reported-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 06 11月, 2011 2 次提交
-
-
由 Mark Brown 提交于
Fairly large code churn but not much doing with that and the overall result is a definite win. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wolfram Sang 提交于
Make this driver a user of the watchdog framework and remove now centrally handled parts. Tested on a mini2440. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 02 11月, 2011 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Al Viro 提交于
* kill duplicates with drivers/char/Kconfig * take watchdog one into drivers/watchdog/Kconfig * take mmapper to arch/um/Kconfig.um * rename Kconfig.char menu to "UML Character Devices" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
- 02 8月, 2011 1 次提交
-
-
由 Josh Boyer 提交于
The newly added WATCHDOG_CORE option is a bool, but the help text suggests it can be built as a module. Fix it up. Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 28 7月, 2011 1 次提交
-
-
由 Wim Van Sebroeck 提交于
The WatchDog Timer Driver Core is a framework that contains the common code for all watchdog-driver's. It also introduces a watchdog device structure and the operations that go with it. This is the introduction of this framework. This part supports the minimal watchdog userspace API (or with other words: the functionality to use /dev/watchdog's open, release and write functionality as defined in the simplest watchdog API). Extra functionality will follow in the next set of patches. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
- 27 7月, 2011 1 次提交
-
-
由 Alejandro Cabrera 提交于
Watchdog timer device driver for Xilinx xps_timebase_wdt compatible ip cores. It takes watchdog timer configuration from device tree and it needs that its parent has defined the property "clock-frecuency". It is compatible with watchdog timer kernel API, so user apps like watchdogd may talk with it. Signed-off-by: NAlejandro Cabrera <aldaya@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 22 7月, 2011 2 次提交
-
-
由 Sascha Hauer 提交于
The i.MX architecture provides IMX_HAVE_PLATFORM_* macros to signal that a selected SoC supports a certain hardware. Use them instead of depending on ARCH_* directly. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
-
由 Jamie Iles 提交于
The Synopsys DesignWare watchdog is found in several ARM based systems and provides a choice of 16 timeout periods depending on the clock input. The watchdog cannot be disabled once started. Signed-off-by: NJamie Iles <jamie@jamieiles.com> Acked-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 17 7月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
hpwdt is a PCI driver so it should depend on PCI. Fixes these build errors: drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap' drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
-
- 16 7月, 2011 1 次提交
-
-
由 Olaf Hering 提交于
Remove Kconfig regression caused by commit a4616153 "watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled" With the above change applied, hpwdt will be enabled unconditionally by just entering the Watchdog subscreen in menuconfig. Since this driver is not essential to boot any box it should remain disabled until it gets manually enabled, just like all other drivers. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Cc: Tony Camuso <tcamuso@redhat.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 28 6月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 - $ gcc --version | head -n 1 gcc (GCC) 4.6.0 20110513 (prerelease) like this : CC drivers/watchdog/intel_scu_watchdog.o In file included from drivers/watchdog/intel_scu_watchdog.c:49:0: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default] drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’: drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration] drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1 make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2 Additionally, linux/types.h is needlessly being included twice in drivers/watchdog/intel_scu_watchdog.c Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 19 5月, 2011 1 次提交
-
-
由 John Crispin 提交于
This patch adds the driver for the watchdog found inside the Lantiq SoC family. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Signed-off-by: NRalph Hempel <ralph.hempel@lantiq.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2327/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 16 3月, 2011 6 次提交
-
-
由 Jan Beulich 提交于
While the hypervisor change adding SCHEDOP_watchdog support included a daemon to make use of the new functionality, having a kernel driver for /dev/watchdog so that user space code doesn't need to distinguish non-Xen and Xen seems to be preferable. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Donald Johnson 提交于
This submission includes: - Fix to intel_scu_write() to start watchdog timer the on the first write, and refresh on subsequent writes. This enables Open, write, write, ... usage model. - Moves boot parameter checks from intel_scu_open() to intel_scu_watchdog_init(), so driver init will fail if these parameters are out of bounds. - Adds check for whether process waiting in wait_event_interruptible() received a signal while it was waiting. - Other small error handling changes. Removed the read() method for now as that wass a non-standard behaviour. Signed-off-by: NDonald Johnson <donald.k.johnson@intel.com> Signed-off-by: NShuduo Sang <shuduo.sang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Paul Cercueil 提交于
Adds support for the hardware watchdog found in Ingenic's jz4740 System-on-Chip. Signed-off-by: NPaul Cercueil <paul@crapouillou.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Huaro Tomita 提交于
This patch adds support for a watchdog in IT8721F Super IO chip to it87_wdt driver. This new chips differ from the older IT87xxxF chips in the following ways: * WDT_GAMEPORT is not in IT8721F. * WDT_PWROK is not in IT8721F. Signed-off-by: NHaruo Tomita <haruo.tomita@toshiba.co.jp> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Tony Camuso 提交于
Builds the hpwdt driver as a module by default. If the hardware is present, the module will be loaded. Also, if hpwdt is loaded, it will decode NMIs by default. This has been made possible by he patches to hpwdt made by Dann Frazier as well as related patches submitted by Don Zickus. hpwdt only loads on hp ProLiant x86 32-bit and 64-bit platforms. Signed-off-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Naga Chumbalkar 提交于
Fix some typos. Signed-off-by: NNaga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 08 2月, 2011 1 次提交
-
-
由 Philippe De Muyter 提交于
All m548x files were renamed to m54xx, except m548x_wdt.c. Fix that. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 12 1月, 2011 6 次提交
-
-
由 Philippe De Muyter 提交于
Add watchdog driver for MCF548x. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Gabor Juhos 提交于
This patch adds a driver for the built-in hardware watchdog device of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Mike Waychison 提交于
This driver adds support for /dev/watchdog for boards using either the MCP51 or MCP55 chipsets. These are also known as the nForce 430 and nForce 550. This driver is likely to work on other chipsets as well, though those are the only two that have been tested. Signed-off-by: NMike Waychison <mikew@google.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Priyanka Gupta 提交于
This driver adds /dev/watchdog support for the AMD sp5100 aka SB7x0 chipsets. It follows the same conventions found in other /dev/watchdog drivers. Signed-off-by: NPriyanka Gupta <priyankag@google.com> Signed-off-by: NMike Waychison <mikew@google.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Lutz Ballaschke 提交于
Update Kconfig with the additional Fintek hardware that we support. Signed-off-by: NLutz Ballaschke <vegan.grindcore@googlemail.com> Acked-by: NGiel van Schijndel <me@mortis.eu> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
The following adds watchdog support for the Winbond W83627DHG chip. I have tested it on a PQ7-M102XL (Intel Atom) board. Signed-off-by: NBenny Lønstrup Ammitzbøll <benny@ammitzboell-consult.dk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 02 12月, 2010 1 次提交
-
-
由 Wim Van Sebroeck 提交于
On some motherboards the it8712f watchdog does not work unless the game port was enabled. see Bug 13140. We therefor add a note to Kconfig. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 10月, 2010 4 次提交
-
-
由 Florian Fainelli 提交于
This patch adds support for the Broadcom BCM63xx SoC built-in watchdog, it uses one of the BCM63xx hardware timer id. Signed-off-by: NMiguel Gaio <miguel.gaio@efixo.com> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Giel van Schijndel 提交于
Signed-off-by: NGiel van Schijndel <me@mortis.eu> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Ondrej Zajicek 提交于
This patch adds support for watchdogs with 8b timers, like ones in IT8702F and older revisions of IT8712F Super IO chip, to it87_wdt driver. This patch should be used after the patch 'it87_wdt: Add support for IT8720F watchdog'. Signed-off-by: NOndrej Zajicek <santiago@crfreenet.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Ondrej Zajicek 提交于
This simple patch adds support for a watchdog in IT8720F Super IO chip to it87_wdt driver. Signed-off-by: NOndrej Zajicek <santiago@crfreenet.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 14 10月, 2010 2 次提交
-
-
由 Timur Tabi 提交于
The PowerPC Book-E watchdog driver (booke_wdt.c) defines a default timeout value in the code based on whether it's a Freescale Book-E part of not. Instead of having hard-coded values in the driver, make it a Kconfig option. As newer chips gets faster, the current default values become less appropriate, since the timeout sometimes occurs before the kernel finishes booting. Making the value a Kconfig option allows BSPs to configure a new value without requiring the wdt_period command-line parameter to be set. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
Register the __init and __exit functions in the PowerPC Book-E Watchdog driver as module entry/exit functions, and modify the Kconfig entry. Add a .release method for the PowerPC Book-E Watchdog driver, so that the watchdog is disabled when the driver is closed. Loosely based on original code from Jiang Yutang <b14898@freescale.com>. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-