The PHYS_BASE defines in arch/arm/mach-ep93xx/include/mach-ep93xx-regs.h are
only used in the SoC code. Move the defines to a local header file.
Signed-off-by: NRyan Mallon <rmallon@gmail.com>
Reviewed-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NHartley Sweeten <hsweeten@visionengravers.com>

Hook these platforms restart code into the new restart hook rather than
using arch_reset().
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that there is a generic IRQ handler for multiple VIC devices use it
for ep93xx to help building multi platform kernels.

Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NPetr Štetiar <ynezz@true.cz>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>

Create a core.c __init function to handle the physmap flash
registration for all the ep93xx platforms.  Also, modify all
the ep93xx platforms to use this new function.

This simplifies all the ep93xx platform init code and reduces
the size of the kernel when including multiple ep93xx boards.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Acked-by: NMartin Guy <martinwguy@gmail.com>
Acked-by: NHubert Feurstein <hubert.feurstein@contec.at>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A number of the peripherals for the ep93xx are registered at
startup using platform_data that is passed from the board init
code to the core code.  This data is then copied to a local
static variable in the core code.  Since the data is copied,
the original data can be marked as __initdata and discarded
after startup is complete.

This adds the __initdata tag to all the appropriate data in
the various ep93xx board init's.  Specifically, all the
struct ep93xx_eth_data, struct ep93xxfb_mach_info, and
struct i2c_gpio_platform_data.

Also, document the various registration functions and note
what data should be marked as __initdata.

While here, also cleanup a couple over zealous whitespace tabs.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Include <linux/i2c.h> in all ep93xx platforms.

Patch "5311/1: add core support for built in i2c bus" will cause build errors due to the following in
arch/arm/mach-ep93xx/include/mach/platform.h:

+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);

The i2c.h header needs to be included in order to define struct i2c_board_info.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use EP93XX_*_PHYS_BASE and SZ_* defines in ep93xx platform inits.

The following patch changes the flash memory hard-coded resource
addresses and MACHINE_START boot_params to EP93XX_*_PHYS_BASE and
SZ_* defines to improve readability. Also some minor whitespace
cleanup resulting from previous patches.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

All EP93xx based systems can support Ethernet. This patch moves
the platform_device setup from the various board support files
into the core support file. The Ethernet driver data still remains
in the individual platform setup files to allow specific platform
configuration.

This also adds Ethernet support to the edb9302, edb9312, and
edb9315 platforms.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Instantiate platform devices for the ep93xx ethernet driver in a
couple of ep93xx board support files.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Patch from Lennert Buytenhek
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Now that the physmap platform device rewrite is in, make the ep93xx
boards use platform devices for physmap flash.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch adds support for the Cirrus ep93xx series of CPUs.  The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.

This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>