- 16 6月, 2015 9 次提交
-
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch checks module working status via io instead of mod Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from snd_kcontrol and related function. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_dma_xxx() and related function Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from rsnd_get_adinr() and its related function Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. Then, interrupt handler can't use rsnd_mod_to_io(). This patch adds SSI/SRC/DMA common interrupt handler frame Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This means we can't call rsnd_mod_to_io() any more. This patch adds struct rsnd_dai_stream to each function as parameter. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This means we can't use rsnd_mod_to_io() in SSI/SRC/DMA interrupt handler. In such case, we need to check all io in interrupt handler, and then, "priv" is needed. This patch adds rsnd_priv pointer in rsnd_mod for prepare it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. Then, we don't need to re-call each mod function that had been called. This patch count each mod status. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
'a9e1ac1a9e4585b5("ASoC: rsnd: spin lock for interrupt handler")' added spin lock under interrupt handler to solve HW restart issue. OTOH, current rsnd driver calls snd_pcm_period_elapsed() from rsnd_dai_pointer_update(). but, it will be called under spin lock if SSI was PIO mode. If it was called under spin lock, it will call snd_pcm_update_state() -> snd_pcm_drain_done(). Then, it calls rsnd_soc_dai_trigger() and will be dead-lock. This patch doesn't call rsnd_dai_pointer_update() under spin lock Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 22 5月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
Renesas R-Car driver interrupt handler was not locked before. But now, SSI/SRC interrupt handler calls restart function which should be called under spin lock. Below error might happen witout this patch. Unable to handle kernel NULL pointer dereference at virtual address 00000048 pgd = edfac000 [00000048] *pgd=6e0f0831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM CPU: 0 PID: 2009 Comm: aplay Not tainted 4.1.0-rc2-dirty #4 Hardware name: Generic R8A7790 (Flattened Device Tree) task: eeac9040 ti: eebe8000 task.ti: eebe8000 PC is at rsnd_get_adinr+0x28/0x60 LR is at rsnd_src_ssiu_start+0xdc/0x19c pc : [<c0409790>] lr : [<c040c068>] psr: a0000193 sp : eebe9e58 ip : eebe9e68 fp : eebe9e64 r10: c06ed9d0 r9 : ee919d10 r8 : 00000001 r7 : 00000001 r6 : ee1cb090 r5 : 00000000 r4 : edcaa418 r3 : 00000000 r2 : eea8ce00 r1 : 80000193 r0 : edcaa418 ... Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Tested by: Cao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 5月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current Renesas R-Car sound driver calls rsnd_dai_stream_init() when start, but it didn't call paired function. This patch adds rsnd_dai_stream_quit() for it. This is prepare for interrupt error status check feature support. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NKeita Kobayashi <keita.kobayashi.ym@renesas.com> Tested by: Cao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 12 5月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
This reverts commit 'e9c390df ("ASoC: rsnd: make sure it uses lock when it calls rsnd_dai_call)' The additional locks make 1") lock issue when boot 2) lock issue when unbind/rmmod. And there is no problem without these locks. This patch revert it. Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 28 4月, 2015 3 次提交
-
-
由 Kuninori Morimoto 提交于
rsnd might be used in multi-codec sound card. Then, same name kcontrol will be registered many times, and it will be error. This patch fixes this issue by using .index Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_dai_call() should be called under rsnd_lock Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Using standardized function/macro name is useful in driver Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 01 4月, 2015 1 次提交
-
-
由 Uwe Kleine-König 提交于
A driver's device data should and can be const. This is a follow-up on commit 33187fb4 (ASoC: rsnd: constify of_device_id array) which marked the of_device_id as const. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 28 3月, 2015 2 次提交
-
-
由 Kuninori Morimoto 提交于
This patch supports DPCM based sampling rate convert on Renesas sound driver. It assumes... 1. SRC is implemented as FE 2. BE dai_link supports .be_hw_params_fixup Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
clk_prepare_enable()/clk_disable_unprepare() uses mutex inside, in concretely clk_prepare()/clk_unprepare().And it uses __schedule(). Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas sound driver's spin lock irq. This patch separates thesse into clk_prepare()/clk_unprepare() and clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from probe/remove function. Special thanks to Das Biju. Reported-by: NDas Biju <biju.das@bp.renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 23 3月, 2015 3 次提交
-
-
由 Kuninori Morimoto 提交于
This patch adds missing dai_link stream_name which is used when DPCM Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
This driver sometimes fixups debug/error message format 30cc4faf (ASoC: rsnd: tidyup debug message format and timing) 337b0b4c (ASoC: rsnd: error meesage indicates its port) But, it still exist un-fomated error message. This patch fixup it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 07 3月, 2015 7 次提交
-
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. Audio DMAC peri peri is controlled from sound driver without DMAEngine by this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound driver had been assumed that Audio DMAC / Audio DMAC peri peri are implemented by DMAEngine. But, result of DMA ML discussion, it was concluded that it is not a general purpose DMAC. And it should be moved from current DMAEngine to rsnd driver. So, Audio DMAC peri peri become non DMAEngine. OTOH, ALSA SoC has soc-generic-dmaengine-pcm implementation. but it seems difficult to use this generic implementation on rsnd driver at this point, since it needs to fallback to PIO mode if DMA can't use. and additionally it needs 2 DMAC (= Audio DMAC / Audio DMAC peri peri). These are not "generic" feature. Of course I will try to use this generic dmaengine in the future somehow, but just use current style at this point until it can formally use 2 DMACs. This patch adds new dma.c and moves current dma code to dma.c from core.c. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
priv is not used on rsnd_dma_quit() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_dma_available() is not used. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
It can get DMA direction via rsnd_dai_stream. Remove un-needed is_play from rsnd_dma_init(). Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas R-Car sound had SH-DMA-BASE specific implementation before, but, now, it is no longer needed. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 09 2月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
Set device data before snd_soc_register_platform/component. Otherwise, it will use NULL pointer if user calls unbind -> bind or rmmod -> insmod Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 03 2月, 2015 2 次提交
-
-
由 Kuninori Morimoto 提交于
Current Renesas R-Car sound driver doesn't call snd_soc_unregiter_component/platform() in .remove. This patch call these functions. Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp> Reported-by: NBui Duc Phuc <bd-phuc@jinso.co.jp> Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current Renesas R-Car sound driver is using snd_ctl_xxx() functions, but it didn't call snd_ctl free_one() / snd_ctl_remove(). This patch call these functions. Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp> Reported-by: NBui Duc Phuc <bd-phuc@jinso.co.jp> Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 15 1月, 2015 9 次提交
-
-
由 Kuninori Morimoto 提交于
Current rsnd driver has rsnd_mod_to_priv() macro, and struct rsnd_mod has struct rsnd_priv pointer. But, it is waste of memory from data structure point of view. Today we can link mod <-> io <-> rdai each other, so saving priv in rdai is very reasonable. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver's function requests rdai, but it is not used. Adding priv is more reasonable. Let's replace it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver's many functions requests struct rsnd_dai (= rdai), but, 1) we can get rdai from rsnd_io_to_rsnd(), 2) almost all rdai is not used. Let's remove these rdai. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver can use rsnd_io_to_rdai() we can get play/capture direction via io now. Let's replace rsnd_dai_is_play() to rsnd_io_is_play() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver request rdai in everywhere, but each mod should reach to rdai by itself. this patch adds missing rsnd_io_to_rdai(). io = rsnd_mod_to_io(mod); rdai = rsnd_io_to_rdai(io); Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_dai_get_platform_info() is not used. Let's remove it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
rsnd_dai_id() was not used. Let's remove it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
struct rsnd_dai is called as "rdai", and struct snd_soc_dai is called as "dai" on this driver. but macro/function have confusable naming. This patch rename rsnd_dai_get() to rsnd_rdai_get() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current rsnd driver's mod (= ssi/src/dvc) have each own clk, but, these are needed to start/stop each mod. This patch adds struct clk in rsnd_mod, and start/stop these via rsnd_mod_hw_start/stop() macro Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-