- 01 9月, 2015 1 次提交
-
-
由 Pravin B Shelar 提交于
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Reviewed-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2015 2 次提交
-
-
由 Jiri Benc 提交于
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2015 5 次提交
-
-
由 Jiri Benc 提交于
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The ip_tunnels.h include file uses mixture of __u16 and u16 (etc.) types. Unify it to the non-underscore variants. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The custom alignment of struct ip_tunnel_key is unnecessary. In struct sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the first field. The structure is also packed even without the __packed keyword. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2015 1 次提交
-
-
由 Pravin B Shelar 提交于
Following patch create new tunnel flag which enable tunnel metadata collection on given device. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 7月, 2015 2 次提交
-
-
由 Thomas Graf 提交于
Convert the module_init() to a invocation from inet_init() since ip_tunnel_core is part of the INET built-in. Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Account for the configuration FIB_RULES=y && INET=n as FIB_RULES can be selected by IPV6 or DECNET without INET. Fixes: e7030878 ("fib: Add fib rule match on tunnel id") Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2015 4 次提交
-
-
由 Thomas Graf 提交于
This add the ability to select a routing table based on the tunnel id which allows to maintain separate routing tables for each virtual tunnel network. ip rule add from all tunnel-id 100 lookup 100 ip rule add from all tunnel-id 200 lookup 200 A new static key controls the collection of metadata at tunnel level upon demand. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
This introduces a new IP tunnel lightweight tunnel type which allows to specify IP tunnel instructions per route. Only IPv4 is supported at this point. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Allows putting a VXLAN device into a new flow-based mode in which skbs with a ip_tunnel_info dst metadata attached will be encapsulated according to the instructions stored in there with the VXLAN device defaults taken into consideration. Similar on the receive side, if the VXLAN_F_COLLECT_METADATA flag is set, the packet processing will populate a ip_tunnel_info struct for each packet received and attach it to the skb using the new metadata dst. The metadata structure will contain the outer header and tunnel header fields which have been stripped off. Layers further up in the stack such as routing, tc or netfitler can later match on these fields and perform forwarding. It is the responsibility of upper layers to ensure that the flag is set if the metadata is needed. The flag limits the additional cost of metadata collecting based on demand. This prepares the VXLAN device to be steered by the routing and other subsystems which allows to support encapsulation for a large number of tunnel endpoints and tunnel ids through a single net_device which improves the scalability. It also allows for OVS to leverage this mode which in turn allows for the removal of the OVS specific VXLAN code. Because the skb is currently scrubed in vxlan_rcv(), the attachment of the new dst metadata is postponed until after scrubing which requires the temporary addition of a new member to vxlan_metadata. This member is removed again in a later commit after the indirect VXLAN receive API has been removed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Rename the tunnel metadata data structures currently internal to OVS and make them generic for use by all IP tunnels. Both structures are kernel internal and will stay that way. Their members are exposed to user space through individual Netlink attributes by OVS. It will therefore be possible to extend/modify these structures without affecting user ABI. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2015 1 次提交
-
-
由 Thomas Graf 提交于
Introduces support for the group policy extension to the VXLAN virtual port. The extension is disabled by default and only enabled if the user has provided the respective configuration. ovs-vsctl add-port br0 vxlan0 -- \ set Interface vxlan0 type=vxlan options:exts=gbp The configuration interface to enable the extension is based on a new attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION which can carry additional extensions as needed in the future. The group policy metadata is stored as binary blob (struct ovs_vxlan_opts) internally just like Geneve options but transported as nested Netlink attributes to user space. Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced. The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Instead of calling fou and gue functions directly from ip_tunnel use ops for these that were previously registered. This patch adds the logic to add and remove encapsulation operations for ip_tunnel, and modified fou (and gue) to register with ip_tunnels. This patch also addresses a circular dependency between ip_tunnel and fou that was causing link errors when CONFIG_NET_IP_TUNNEL=y and CONFIG_NET_FOU=m. References to fou an gue have been removed from ip_tunnel.c Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2014 2 次提交
-
-
由 Jesse Gross 提交于
The Openvswitch implementation is completely agnostic to the options that are in use and can handle newly defined options without further work. It does this by simply matching on a byte array of options and allowing userspace to setup flows on this array. Signed-off-by: NJesse Gross <jesse@nicira.com> Singed-off-by: NAnsis Atteka <aatteka@nicira.com> Signed-off-by: NAndy Zhou <azhou@nicira.com> Acked-by: NThomas Graf <tgraf@noironetworks.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Zhou 提交于
This adds a device level support for Geneve -- Generic Network Virtualization Encapsulation. The protocol is documented at http://tools.ietf.org/html/draft-gross-geneve-01 Only protocol layer Geneve support is provided by this driver. Openvswitch can be used for configuring, set up and tear down functional Geneve tunnels. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NAndy Zhou <azhou@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
This patch changes IP tunnel to support (secondary) encapsulation, Foo-over-UDP. Changes include: 1) Adding tun_hlen as the tunnel header length, encap_hlen as the encapsulation header length, and hlen becomes the grand total of these. 2) Added common netlink define to support FOU encapsulation. 3) Routines to perform FOU encapsulation. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2014 1 次提交
-
-
由 Dmitry Popov 提交于
Ipv4 tunnels created with "local any remote $ip" didn't work properly since 7d442fab (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels had src addr = 0.0.0.0. That was because only dst_entry was cached, although fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry (tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit(). This patch adds saddr to ip_tunnel->dst_cache, fixing this issue. Reported-by: NSergey Popov <pinkbyte@gentoo.org> Signed-off-by: NDmitry Popov <ixaphire@qrator.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c92 ("vxlan: keep original skb ownership") Reported-by: Nlucien xin <lucien.xin@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
Bug introduced by commit 7d442fab ("ipv4: Cache dst in tunnels"). Because sit code does not call ip_tunnel_init(), the dst_cache was not initialized. CC: Tom Herbert <therbert@google.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
This patch : 1) Remove a dst leak if DST_NOCACHE was set on dst Fix this by holding a reference only if dst really cached. 2) Remove a lockdep warning in __tunnel_dst_set() This was reported by Cong Wang. 3) Remove usage of a spinlock where xchg() is enough 4) Remove some spurious inline keywords. Let compiler decide for us. Fixes: 7d442fab ("ipv4: Cache dst in tunnels") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2014 1 次提交
-
-
由 Li RongQing 提交于
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2014 2 次提交
-
-
由 Tom Herbert 提交于
percpu route cache eliminates share of dst refcnt between CPUs. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Avoid doing a route lookup on every packet being tunneled. In ip_tunnel.c cache the route returned from ip_route_output if the tunnel is "connected" so that all the rouitng parameters are taken from tunnel parms for a packet. Specifically, not NBMA tunnel and tos is from tunnel parms (not inner packet). Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
This patch makes gre_handle_offloads() more generic and rename it to iptunnel_handle_offloads() This will be used to add GSO/TSO support to IPIP tunnels. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2013 2 次提交
-
-
由 Nicolas Dichtel 提交于
The goal of this patch is to harmonize cleanup done on a skbuff on xmit path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This argument is not used, let's remove it. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2013 1 次提交
-
-
由 Pravin B Shelar 提交于
Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab081 (IP_GRE: Fix IP-Identification.) CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2013 1 次提交
-
-
由 stephen hemminger 提交于
The IP tunnel hash heads can be embedded in the per-net structure since it is a fixed size. Reduce the size so that the total structure fits in a page size. The original size was overly large, even NETDEV_HASHBITS is only 8 bits! Also, add some white space for readability. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: Pravin B Shelar <pshelar@nicira.com>. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2013 1 次提交
-
-
由 Jesse Gross 提交于
Tunnel constants can be used in generic code but in these cases the inline functions in ip_tunnels.h cause compilation problems if CONFIG_INET is not set. CC: Pravin Shelar <pshelar@nicira.com> Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJesse Gross <jesse@nicira.com> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 3 次提交
-
-
由 Pravin B Shelar 提交于
This flag will be used by ovs tunneling. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-